Mirrors/blakeblackshear.frigate
1
0
Fork 0
mirror of https://github.com/blakeblackshear/frigate.git synced 2024-11-21 19:07:46 +01:00
Code Issues Projects Releases Wiki Activity

docs updates

Browse Source
This commit is contained in:
Blake Blackshear 2021-09-12 14:48:21 -05:00
parent a7b7a45b23
commit 0320d94ea6
33 changed files with 3911 additions and 7160 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

82
docs/docs/configuration/advanced.md
View File

@ -1,50 +1,11 @@
--- ---
id: advanced id: advanced
title: Advanced title: Advanced Options
sidebar_label: Advanced sidebar_label: Advanced Options
--- ---
## Advanced configuration ## Advanced configuration
### `motion`
Global motion detection config. These may also be defined at the camera level.
```yaml
motion:
# Optional: The threshold passed to cv2.threshold to determine if a pixel is different enough to be counted as motion. (default: shown below)
# Increasing this value will make motion detection less sensitive and decreasing it will make motion detection more sensitive.
# The value should be between 1 and 255.
threshold: 25
# Optional: Minimum size in pixels in the resized motion image that counts as motion (default: ~0.17% of the motion frame area)
# Increasing this value will prevent smaller areas of motion from being detected. Decreasing will make motion detection more sensitive to smaller
# moving objects.
contour_area: 100
# Optional: Alpha value passed to cv2.accumulateWeighted when averaging the motion delta across multiple frames (default: shown below)
# Higher values mean the current frame impacts the delta a lot, and a single raindrop may register as motion.
# Too low and a fast moving person wont be detected as motion.
delta_alpha: 0.2
# Optional: Alpha value passed to cv2.accumulateWeighted when averaging frames to determine the background (default: shown below)
# Higher values mean the current frame impacts the average a lot, and a new object will be averaged into the background faster.
# Low values will cause things like moving shadows to be detected as motion for longer.
# https://www.geeksforgeeks.org/background-subtraction-in-an-image-using-concept-of-running-average/
frame_alpha: 0.2
# Optional: Height of the resized motion frame (default: 1/6th of the original frame height, but no less than 180)
# This operates as an efficient blur alternative. Higher values will result in more granular motion detection at the expense of higher CPU usage.
# Lower values result in less CPU, but small changes may not register as motion.
frame_height: 180
```
### `detect`
Global object detection settings. These may also be defined at the camera level.
```yaml
detect:
# Optional: Number of frames without a detection before frigate considers an object to be gone. (default: 5x the frame rate)
max_disappeared: 25
```
### `logger` ### `logger`
Change the default log level for troubleshooting purposes. Change the default log level for troubleshooting purposes.
@ -72,12 +33,7 @@ Examples of available modules are:
### `environment_vars` ### `environment_vars`
This section can be used to set environment variables for those unable to modify the environment of the container (ie. within Hass.io) This section can be used to set environment variables for those unable to modify the environment of the container (ie. within HassOS)
```yaml
environment_vars:
EXAMPLE_VAR: value
```
### `database` ### `database`
@ -87,40 +43,8 @@ If you are storing your database on a network share (SMB, NFS, etc), you may get
This may need to be in a custom location if network storage is used for the media folder. This may need to be in a custom location if network storage is used for the media folder.
```yaml
database:
path: /media/frigate/frigate.db
```
### `detectors`
```yaml
detectors:
# Required: name of the detector
coral:
# Required: type of the detector
# Valid values are 'edgetpu' (requires device property below) and 'cpu'.
type: edgetpu
# Optional: device name as defined here: https://coral.ai/docs/edgetpu/multiple-edgetpu/#using-the-tensorflow-lite-python-api
device: usb
# Optional: num_threads value passed to the tflite.Interpreter (default: shown below)
# This value is only used for CPU types
num_threads: 3
```
### `model` ### `model`
If using a custom model, the width and height will need to be specified. If using a custom model, the width and height will need to be specified.
The labelmap can be customized to your needs. A common reason to do this is to combine multiple object types that are easily confused when you don't need to be as granular such as car/truck. By default, truck is renamed to car because they are often confused. You cannot add new object types, but you can change the names of existing objects in the model. The labelmap can be customized to your needs. A common reason to do this is to combine multiple object types that are easily confused when you don't need to be as granular such as car/truck. By default, truck is renamed to car because they are often confused. You cannot add new object types, but you can change the names of existing objects in the model.
```yaml
model:
# Required: height of the trained model
height: 320
# Required: width of the trained model
width: 320
# Optional: labelmap overrides
labelmap:
7: car
```

82
docs/docs/configuration/camera_specific.md Normal file
View File

@ -0,0 +1,82 @@
---
id: camera_specific
title: Camera Specific Configurations
---
### MJPEG Cameras
The input and output parameters need to be adjusted for MJPEG cameras
```yaml
input_args:
- -avoid_negative_ts
- make_zero
- -fflags
- nobuffer
- -flags
- low_delay
- -strict
- experimental
- -fflags
- +genpts+discardcorrupt
- -r
- "3" # <---- adjust depending on your desired frame rate from the mjpeg image
- -use_wallclock_as_timestamps
- "1"
```
Note that mjpeg cameras require encoding the video into h264 for recording, and rtmp roles. This will use significantly more CPU than if the cameras supported h264 feeds directly.
```yaml
output_args:
record: -f segment -segment_time 10 -segment_format mp4 -reset_timestamps 1 -strftime 1 -c:v libx264 -an
rtmp: -c:v libx264 -an -f flv
```
### RTMP Cameras (Reolink 410/520 and possibly others)
The input parameters need to be adjusted for RTMP cameras
```yaml
ffmpeg:
input_args:
- -avoid_negative_ts
- make_zero
- -fflags
- nobuffer
- -flags
- low_delay
- -strict
- experimental
- -fflags
- +genpts+discardcorrupt
- -rw_timeout
- "5000000"
- -use_wallclock_as_timestamps
- "1"
- -f
- live_flv
```
### Blue Iris RTSP Cameras
You will need to remove `nobuffer` flag for Blue Iris RTSP cameras
```yaml
ffmpeg:
input_args:
- -avoid_negative_ts
- make_zero
- -flags
- low_delay
- -strict
- experimental
- -fflags
- +genpts+discardcorrupt
- -rtsp_transport
- tcp
- -stimeout
- "5000000"
- -use_wallclock_as_timestamps
- "1"
```

536
docs/docs/configuration/cameras.md
View File

@ -5,17 +5,15 @@ title: Cameras
## Setting Up Camera Inputs ## Setting Up Camera Inputs
Up to 4 inputs can be configured for each camera and the role of each input can be mixed and matched based on your needs. This allows you to use a lower resolution stream for object detection, but create recordings from a higher resolution stream, or vice versa. Several inputs can be configured for each camera and the role of each input can be mixed and matched based on your needs. This allows you to use a lower resolution stream for object detection, but create recordings from a higher resolution stream, or vice versa.
Each role can only be assigned to one input per camera. The options for roles are as follows: Each role can only be assigned to one input per camera. The options for roles are as follows:
| Role | Description | | Role | Description |
| -------- | ------------------------------------------------------------------------------------- | | -------- | ----------------------------------------------------------------------------------------------- |
| `detect` | Main feed for object detection | | `detect` | Main feed for object detection |
| `record` | Saves segments of the video feed based on configuration settings. [docs](#recordings) | | `record` | Saves segments of the video feed based on configuration settings. [docs](/configuration/record) |
| `rtmp` | Broadcast as an RTMP feed for other services to consume. [docs](#rtmp-streams) | | `rtmp` | Broadcast as an RTMP feed for other services to consume. [docs](/configuration/rtmp) |
### Example
```yaml ```yaml
mqtt: mqtt:
@ -34,526 +32,14 @@ cameras:
detect: detect:
width: 1280 width: 1280
height: 720 height: 720
fps: 5
``` ```
`width`, `height`, and `fps` are only used for the `detect` role. Other streams are passed through, so there is no need to specify the resolution. Additional cameras are simply added to the config under the `cameras` entry.
## Masks & Zones
### Masks
Masks are used to ignore initial detection in areas of your camera's field of view.
There are two types of masks available:
- **Motion masks**: Motion masks are used to prevent unwanted types of motion from triggering detection. Try watching the video feed with `Motion Boxes` enabled to see what may be regularly detected as motion. For example, you want to mask out your timestamp, the sky, rooftops, etc. Keep in mind that this mask only prevents motion from being detected and does not prevent objects from being detected if object detection was started due to motion in unmasked areas. Motion is also used during object tracking to refine the object detection area in the next frame. Over masking will make it more difficult for objects to be tracked. To see this effect, create a mask, and then watch the video feed with `Motion Boxes` enabled again.
- **Object filter masks**: Object filter masks are used to filter out false positives for a given object type. These should be used to filter any areas where it is not possible for an object of that type to be. The bottom center of the detected object's bounding box is evaluated against the mask. If it is in a masked area, it is assumed to be a false positive. For example, you may want to mask out rooftops, walls, the sky, treetops for people. For cars, masking locations other than the street or your driveway will tell frigate that anything in your yard is a false positive.
To create a poly mask:
1. Visit the [web UI](/usage/web)
1. Click the camera you wish to create a mask for
1. Click "Mask & Zone creator"
1. Click "Add" on the type of mask or zone you would like to create
1. Click on the camera's latest image to create a masked area. The yaml representation will be updated in real-time
1. When you've finished creating your mask, click "Copy" and paste the contents into your `config.yaml` file and restart Frigate
Example of a finished row corresponding to the below example image:
```yaml
motion:
mask: "0,461,3,0,1919,0,1919,843,1699,492,1344,458,1346,336,973,317,869,375,866,432"
```
![poly](/img/example-mask-poly.png)
```yaml
# Optional: camera level motion config
motion:
# Optional: motion mask
# NOTE: see docs for more detailed info on creating masks
mask: 0,900,1080,900,1080,1920,0,1920
```
### Zones
Zones allow you to define a specific area of the frame and apply additional filters for object types so you can determine whether or not an object is within a particular area. Zones cannot have the same name as a camera. If desired, a single zone can include multiple cameras if you have multiple cameras covering the same area by configuring zones with the same name for each camera.
During testing, `draw_zones` should be set in the config to draw the zone on the frames so you can adjust as needed. The zone line will increase in thickness when any object enters the zone.
To create a zone, follow the same steps above for a "Motion mask", but use the section of the web UI for creating a zone instead.
```yaml
# Optional: zones for this camera
zones:
# Required: name of the zone
# NOTE: This must be different than any camera names, but can match with another zone on another
# camera.
front_steps:
# Required: List of x,y coordinates to define the polygon of the zone.
# NOTE: Coordinates can be generated at https://www.image-map.net/
coordinates: 545,1077,747,939,788,805
# Optional: List of objects that can trigger this zone (default: all tracked objects)
objects:
- person
# Optional: Zone level object filters.
# NOTE: The global and camera filters are applied upstream.
filters:
person:
min_area: 5000
max_area: 100000
threshold: 0.7
```
## Objects
For a list of available objects, see the [objects documentation](./objects.mdx).
```yaml
# Optional: Camera level object filters config.
objects:
track:
- person
- car
# Optional: mask to prevent all object types from being detected in certain areas (default: no mask)
# Checks based on the bottom center of the bounding box of the object.
# NOTE: This mask is COMBINED with the object type specific mask below
mask: 0,0,1000,0,1000,200,0,200
filters:
person:
min_area: 5000
max_area: 100000
min_score: 0.5
threshold: 0.7
# Optional: mask to prevent this object type from being detected in certain areas (default: no mask)
# Checks based on the bottom center of the bounding box of the object
mask: 0,0,1000,0,1000,200,0,200
```
## Recordings
24/7 recordings can be enabled and are stored at `/media/frigate/recordings`. The folder structure for the recordings is `YYYY-MM/DD/HH/<camera_name>/MM.SS.mp4`. These recordings are written directly from your camera stream without re-encoding and are available in Home Assistant's media browser. Each camera supports a configurable retention policy in the config.
Exported clips are also created off of these recordings. Frigate chooses the largest matching retention value between the recording retention and the event retention when determining if a recording should be removed.
These recordings will not be playable in the web UI or in Home Assistant's media browser unless your camera sends video as h264.
:::caution
Previous versions of frigate included `-vsync drop` in input parameters. This is not compatible with FFmpeg's segment feature and must be removed from your input parameters if you have overrides set.
:::
```yaml
record:
# Optional: Enable recording (default: shown below)
enabled: False
# Optional: Number of days to retain (default: shown below)
retain_days: 0
# Optional: Event recording settings
events:
# Optional: Enable event recording retention settings (default: shown below)
enabled: False
# Optional: Maximum length of time to retain video during long events. (default: shown below)
# NOTE: If an object is being tracked for longer than this amount of time, the cache
# will begin to expire and the resulting clip will be the last x seconds of the event unless retain_days under record is > 0.
max_seconds: 300
# Optional: Number of seconds before the event to include in the event (default: shown below)
pre_capture: 5
# Optional: Number of seconds after the event to include in the event (default: shown below)
post_capture: 5
# Optional: Objects to save event for. (default: all tracked objects)
objects:
- person
# Optional: Restrict event to objects that entered any of the listed zones (default: no required zones)
required_zones: []
# Optional: Retention settings for event
retain:
# Required: Default retention days (default: shown below)
default: 10
# Optional: Per object retention days
objects:
person: 15
```
## Snapshots
Frigate can save a snapshot image to `/media/frigate/clips` for each event named as `<camera>-<id>.jpg`.
```yaml
# Optional: Configuration for the jpg snapshots written to the clips directory for each event
snapshots:
# Optional: Enable writing jpg snapshot to /media/frigate/clips (default: shown below)
# This value can be set via MQTT and will be updated in startup based on retained value
enabled: False
# Optional: Enable writing a clean copy png snapshot to /media/frigate/clips (default: shown below)
# Only works if snapshots are enabled. This image is intended to be used for training purposes.
clean_copy: True
# Optional: print a timestamp on the snapshots (default: shown below)
timestamp: False
# Optional: draw bounding box on the snapshots (default: shown below)
bounding_box: False
# Optional: crop the snapshot (default: shown below)
crop: False
# Optional: height to resize the snapshot to (default: original size)
height: 175
# Optional: jpeg encode quality (default: shown below)
quality: 70
# Optional: Restrict snapshots to objects that entered any of the listed zones (default: no required zones)
required_zones: []
# Optional: Camera override for retention settings (default: global values)
retain:
# Required: Default retention days (default: shown below)
default: 10
# Optional: Per object retention days
objects:
person: 15
```
## RTMP streams
Frigate can re-stream your video feed as a RTMP feed for other applications such as Home Assistant to utilize it at `rtmp://<frigate_host>/live/<camera_name>`. Port 1935 must be open. This allows you to use a video feed for detection in frigate and Home Assistant live view at the same time without having to make two separate connections to the camera. The video feed is copied from the original video feed directly to avoid re-encoding. This feed does not include any annotation by Frigate.
Some video feeds are not compatible with RTMP. If you are experiencing issues, check to make sure your camera feed is h264 with AAC audio. If your camera doesn't support a compatible format for RTMP, you can use the ffmpeg args to re-encode it on the fly at the expense of increased CPU utilization.
```yaml
rtmp:
# Optional: Enable the RTMP stream (default: True)
enabled: True
```
## Timestamp style configuration
For the debug view and snapshots it is possible to embed a timestamp in the feed. In some instances the default position obstructs important space, visibility or contrast is too low because of color or the datetime format does not match ones desire.
```yaml
# Optional: in-feed timestamp style configuration
timestamp_style:
# Optional: Position of the timestamp (default: shown below)
# "tl" (top left), "tr" (top right), "bl" (bottom left), "br" (bottom right)
position: "tl"
# Optional: Format specifier conform to the Python package "datetime" (default: shown below)
# Additional Examples:
# german: "%d.%m.%Y %H:%M:%S"
format: "%m/%d/%Y %H:%M:%S"
# Optional: Color of font
color:
# All Required when color is specified (default: shown below)
red: 255
green: 255
blue: 255
# Optional: Line thickness of font (default: shown below)
thickness: 2
# Optional: Effect of lettering (default: shown below)
# None (No effect),
# "solid" (solid background in inverse color of font)
# "shadow" (shadow for font)
effect: None
```
## Full example
The following is a full example of all of the options together for a camera configuration
```yaml ```yaml
mqtt: ...
cameras: cameras:
# Required: name of the camera back: ...
back: front: ...
# Required: ffmpeg settings for the camera side: ...
ffmpeg:
# Required: A list of input streams for the camera. See documentation for more information.
inputs:
# Required: the path to the stream
# NOTE: Environment variables that begin with 'FRIGATE_' may be referenced in {}
- path: rtsp://viewer:{FRIGATE_RTSP_PASSWORD}@10.0.10.10:554/cam/realmonitor?channel=1&subtype=2
# Required: list of roles for this stream. valid values are: detect,record,rtmp
# NOTICE: In addition to assigning the record, and rtmp roles,
# they must also be enabled in the camera config.
roles:
- detect
- rtmp
# Optional: stream specific global args (default: inherit)
global_args:
# Optional: stream specific hwaccel args (default: inherit)
hwaccel_args:
# Optional: stream specific input args (default: inherit)
input_args:
# Optional: camera specific global args (default: inherit)
global_args:
# Optional: camera specific hwaccel args (default: inherit)
hwaccel_args:
# Optional: camera specific input args (default: inherit)
input_args:
# Optional: camera specific output args (default: inherit)
output_args:
# Required: Camera level detect settings
detect:
# Optional: width of the frame for the input with the detect role (default: shown below)
width: 1280
# Optional: height of the frame for the input with the detect role (default: shown below)
height: 720
# Optional: desired fps for your camera for the input with the detect role (default: shown below)
# NOTE: Recommended value of 5. Ideally, try and reduce your FPS on the camera.
fps: 5
# Optional: enables detection for the camera (default: True)
# This value can be set via MQTT and will be updated in startup based on retained value
enabled: True
# Optional: Number of frames without a detection before frigate considers an object to be gone. (default: 5x the frame rate)
max_disappeared: 25
# Optional: camera level motion config
motion:
# Optional: motion mask
# NOTE: see docs for more detailed info on creating masks
mask: 0,900,1080,900,1080,1920,0,1920
# Optional: timeout for highest scoring image before allowing it
# to be replaced by a newer image. (default: shown below)
best_image_timeout: 60
# Optional: zones for this camera
zones:
# Required: name of the zone
# NOTE: This must be different than any camera names, but can match with another zone on another
# camera.
front_steps:
# Required: List of x,y coordinates to define the polygon of the zone.
# NOTE: Coordinates can be generated at https://www.image-map.net/
coordinates: 545,1077,747,939,788,805
# Optional: List of objects that can trigger this zone (default: all tracked objects)
objects:
- person
# Optional: Zone level object filters.
# NOTE: The global and camera filters are applied upstream.
filters:
person:
min_area: 5000
max_area: 100000
threshold: 0.7
# Optional: 24/7 recording configuration
record:
# Optional: Enable recording (default: global setting)
enabled: False
# Optional: Number of days to retain (default: global setting)
retain_days: 30
# Optional: Event recording settings
events:
# Required: enables event recordings for the camera (default: shown below)
# This value can be set via MQTT and will be updated in startup based on retained value
enabled: False
# Optional: Number of seconds before the event to include (default: shown below)
pre_capture: 5
# Optional: Number of seconds after the event to include (default: shown below)
post_capture: 5
# Optional: Objects to save events for. (default: all tracked objects)
objects:
- person
# Optional: Restrict events to objects that entered any of the listed zones (default: no required zones)
required_zones: []
# Optional: Camera override for retention settings (default: global values)
retain:
# Required: Default retention days (default: shown below)
default: 10
# Optional: Per object retention days
objects:
person: 15
# Optional: RTMP re-stream configuration
rtmp:
# Optional: Enable the RTMP stream (default: True)
enabled: True
# Optional: Live stream configuration for WebUI
live:
# Optional: Set the height of the live stream. (default: 720)
# This must be less than or equal to the height of the detect stream. Lower resolutions
# reduce bandwidth required for viewing the live stream. Width is computed to match known aspect ratio.
height: 720
# Optional: Set the encode quality of the live stream (default: shown below)
# 1 is the highest quality, and 31 is the lowest. Lower quality feeds utilize less CPU resources.
quality: 8
# Optional: Configuration for the jpg snapshots written to the clips directory for each event
snapshots:
# Optional: Enable writing jpg snapshot to /media/frigate/clips (default: shown below)
# This value can be set via MQTT and will be updated in startup based on retained value
enabled: False
# Optional: print a timestamp on the snapshots (default: shown below)
timestamp: False
# Optional: draw bounding box on the snapshots (default: shown below)
bounding_box: False
# Optional: crop the snapshot (default: shown below)
crop: False
# Optional: height to resize the snapshot to (default: original size)
height: 175
# Optional: Restrict snapshots to objects that entered any of the listed zones (default: no required zones)
required_zones: []
# Optional: Camera override for retention settings (default: global values)
retain:
# Required: Default retention days (default: shown below)
default: 10
# Optional: Per object retention days
objects:
person: 15
# Optional: Configuration for the jpg snapshots published via MQTT
mqtt:
# Optional: Enable publishing snapshot via mqtt for camera (default: shown below)
# NOTE: Only applies to publishing image data to MQTT via 'frigate/<camera_name>/<object_name>/snapshot'.
# All other messages will still be published.
enabled: True
# Optional: print a timestamp on the snapshots (default: shown below)
timestamp: True
# Optional: draw bounding box on the snapshots (default: shown below)
bounding_box: True
# Optional: crop the snapshot (default: shown below)
crop: True
# Optional: height to resize the snapshot to (default: shown below)
height: 270
# Optional: jpeg encode quality (default: shown below)
quality: 70
# Optional: Restrict mqtt messages to objects that entered any of the listed zones (default: no required zones)
required_zones: []
# Optional: Camera level object filters config.
objects:
track:
- person
- car
# Optional: mask to prevent all object types from being detected in certain areas (default: no mask)
# Checks based on the bottom center of the bounding box of the object.
# NOTE: This mask is COMBINED with the object type specific mask below
mask: 0,0,1000,0,1000,200,0,200
filters:
person:
min_area: 5000
max_area: 100000
min_score: 0.5
threshold: 0.7
# Optional: mask to prevent this object type from being detected in certain areas (default: no mask)
# Checks based on the bottom center of the bounding box of the object
mask: 0,0,1000,0,1000,200,0,200
# Optional: In-feed timestamp style configuration
timestamp_style:
# Optional: Position of the timestamp (default: shown below)
# "tl" (top left), "tr" (top right), "bl" (bottom left), "br" (bottom right)
position: "tl"
# Optional: Format specifier conform to the Python package "datetime" (default: shown below)
# Additional Examples:
# german: "%d.%m.%Y %H:%M:%S"
format: "%m/%d/%Y %H:%M:%S"
# Optional: Color of font
color:
# All Required when color is specified (default: shown below)
red: 255
green: 255
blue: 255
# Optional: Line thickness of font (default: shown below)
thickness: 2
# Optional: Effect of lettering (default: shown below)
# None (No effect),
# "solid" (solid background in inverse color of font)
# "shadow" (shadow for font)
effect: None
```
## Camera specific configuration
### MJPEG Cameras
The input and output parameters need to be adjusted for MJPEG cameras
```yaml
input_args:
- -avoid_negative_ts
- make_zero
- -fflags
- nobuffer
- -flags
- low_delay
- -strict
- experimental
- -fflags
- +genpts+discardcorrupt
- -r
- "3" # <---- adjust depending on your desired frame rate from the mjpeg image
- -use_wallclock_as_timestamps
- "1"
```
Note that mjpeg cameras require encoding the video into h264 for recording, and rtmp roles. This will use significantly more CPU than if the cameras supported h264 feeds directly.
```yaml
output_args:
record: -f segment -segment_time 60 -segment_format mp4 -reset_timestamps 1 -strftime 1 -c:v libx264 -an
rtmp: -c:v libx264 -an -f flv
```
### RTMP Cameras
The input parameters need to be adjusted for RTMP cameras
```yaml
ffmpeg:
input_args:
- -avoid_negative_ts
- make_zero
- -fflags
- nobuffer
- -flags
- low_delay
- -strict
- experimental
- -fflags
- +genpts+discardcorrupt
- -use_wallclock_as_timestamps
- "1"
```
### Reolink 410/520 (possibly others)
Several users have reported success with the rtmp video from Reolink cameras.
```yaml
ffmpeg:
input_args:
- -avoid_negative_ts
- make_zero
- -fflags
- nobuffer
- -flags
- low_delay
- -strict
- experimental
- -fflags
- +genpts+discardcorrupt
- -rw_timeout
- "5000000"
- -use_wallclock_as_timestamps
- "1"
```
### Blue Iris RTSP Cameras
You will need to remove `nobuffer` flag for Blue Iris RTSP cameras
```yaml
ffmpeg:
input_args:
- -avoid_negative_ts
- make_zero
- -flags
- low_delay
- -strict
- experimental
- -fflags
- +genpts+discardcorrupt
- -rtsp_transport
- tcp
- -stimeout
- "5000000"
- -use_wallclock_as_timestamps
- "1"
``` ```

20
docs/docs/configuration/detectors.md
View File

@ -3,13 +3,13 @@ id: detectors
title: Detectors title: Detectors
--- ---
The default config will look for a USB Coral device. If you do not have a Coral, you will need to configure a CPU detector. If you have PCI or multiple Coral devices, you need to configure your detector devices in the config file. When using multiple detectors, they run in dedicated processes, but pull from a common queue of requested detections across all cameras. By default, Frigate will use a single CPU detector. If you have a Coral, you will need to configure your detector devices in the config file. When using multiple detectors, they run in dedicated processes, but pull from a common queue of requested detections across all cameras.
Frigate supports `edgetpu` and `cpu` as detector types. The device value should be specified according to the [Documentation for the TensorFlow Lite Python API](https://coral.ai/docs/edgetpu/multiple-edgetpu/#using-the-tensorflow-lite-python-api). Frigate supports `edgetpu` and `cpu` as detector types. The device value should be specified according to the [Documentation for the TensorFlow Lite Python API](https://coral.ai/docs/edgetpu/multiple-edgetpu/#using-the-tensorflow-lite-python-api).
**Note**: There is no support for Nvidia GPUs to perform object detection with tensorflow. It can be used for ffmpeg decoding, but not object detection. **Note**: There is no support for Nvidia GPUs to perform object detection with tensorflow. It can be used for ffmpeg decoding, but not object detection.
Single USB Coral: ### Single USB Coral
```yaml ```yaml
detectors: detectors:
@ -18,7 +18,7 @@ detectors:
device: usb device: usb
``` ```
Multiple USB Corals: ### Multiple USB Corals
```yaml ```yaml
detectors: detectors:
@ -30,16 +30,16 @@ detectors:
device: usb:1 device: usb:1
``` ```
Native Coral (Dev Board): ### Native Coral (Dev Board)
```yaml ```yaml
detectors: detectors:
coral: coral:
type: edgetpu type: edgetpu
device: '' device: ""
``` ```
Multiple PCIE/M.2 Corals: ### Multiple PCIE/M.2 Corals
```yaml ```yaml
detectors: detectors:
@ -51,7 +51,7 @@ detectors:
device: pci:1 device: pci:1
``` ```
Mixing Corals: ### Mixing Corals
```yaml ```yaml
detectors: detectors:
@ -63,12 +63,16 @@ detectors:
device: pci device: pci
``` ```
CPU Detectors (not recommended): ### CPU Detectors (not recommended)
```yaml ```yaml
detectors: detectors:
cpu1: cpu1:
type: cpu type: cpu
num_threads: 3
cpu2: cpu2:
type: cpu type: cpu
num_threads: 3
``` ```
When using CPU detectors, you can add a CPU detector per camera. Adding more detectors than the number of cameras should not improve performance.

70
docs/docs/configuration/hardware_acceleration.md Normal file
View File

@ -0,0 +1,70 @@
---
id: hardware_acceleration
title: Hardware Acceleration
---
It is recommended to update your configuration to enable hardware accelerated decoding in ffmpeg. Depending on your system, these parameters may not be compatible. More information on hardware accelerated decoding for ffmpeg can be found here: https://trac.ffmpeg.org/wiki/HWAccelIntro
### Raspberry Pi 3/4 (32-bit OS)
Ensure you increase the allocated RAM for your GPU to at least 128 (raspi-config > Performance Options > GPU Memory).
**NOTICE**: If you are using the addon, you may need to turn off `Protection mode` for hardware acceleration.
```yaml
ffmpeg:
hwaccel_args:
- -c:v
- h264_mmal
```
### Raspberry Pi 3/4 (64-bit OS)
**NOTICE**: If you are using the addon, you may need to turn off `Protection mode` for hardware acceleration.
```yaml
ffmpeg:
hwaccel_args:
- -c:v
- h264_v4l2m2m
```
### Intel-based CPUs (<10th Generation) via Quicksync
```yaml
ffmpeg:
hwaccel_args:
- -hwaccel
- vaapi
- -hwaccel_device
- /dev/dri/renderD128
- -hwaccel_output_format
- yuv420p
```
### Intel-based CPUs (>=10th Generation) via Quicksync
```yaml
ffmpeg:
hwaccel_args:
- -hwaccel
- qsv
- -qsv_device
- /dev/dri/renderD128
```
### AMD/ATI GPUs (Radeon HD 2000 and newer GPUs) via libva-mesa-driver
**Note:** You also need to set `LIBVA_DRIVER_NAME=radeonsi` as an environment variable on the container.
```yaml
ffmpeg:
hwaccel_args:
- -hwaccel
- vaapi
- -hwaccel_device
- /dev/dri/renderD128
```
### NVIDIA GPU
NVIDIA GPU based decoding via NVDEC is supported, but requires special configuration. See the [NVIDIA NVDEC documentation](/configuration/nvdec) for more details.

419
docs/docs/configuration/index.md
View File

@ -1,13 +1,13 @@
--- ---
id: index id: index
title: Configuration title: Configuration File
--- ---
For HassOS installations, the default location for the config file is `/config/frigate.yml`. For Home Assistant Addon installations, the config file needs to be in the root of your Home Assistant config directory (same location as `configuration.yaml`) and named `frigate.yml`.
For all other installations, the default location for the config file is '/config/config.yml'. This can be overridden with the `CONFIG_FILE` environment variable. Camera specific ffmpeg parameters are documented [here](cameras.md). For all other installation types, the config file should be mapped to `/config/config.yml` inside the container.
It is recommended to start with a minimal configuration and add to it: It is recommended to start with a minimal configuration and add to it as described in [this guide](/guides/getting_started):
```yaml ```yaml
mqtt: mqtt:
@ -23,12 +23,15 @@ cameras:
detect: detect:
width: 1280 width: 1280
height: 720 height: 720
fps: 5
``` ```
## Required ### Full configuration reference:
## `mqtt` :::caution
It is not recommended to copy this full configuration file. Only specify values that are different from the defaults. Configuration options and default values may change in future versions.
:::
```yaml ```yaml
mqtt: mqtt:
@ -37,10 +40,10 @@ mqtt:
# Optional: port (default: shown below) # Optional: port (default: shown below)
port: 1883 port: 1883
# Optional: topic prefix (default: shown below) # Optional: topic prefix (default: shown below)
# WARNING: must be unique if you are running multiple instances # NOTE: must be unique if you are running multiple instances
topic_prefix: frigate topic_prefix: frigate
# Optional: client id (default: shown below) # Optional: client id (default: shown below)
# WARNING: must be unique if you are running multiple instances # NOTE: must be unique if you are running multiple instances
client_id: frigate client_id: frigate
# Optional: user # Optional: user
user: mqtt_user user: mqtt_user
@ -61,59 +64,39 @@ mqtt:
tls_insecure: false tls_insecure: false
# Optional: interval in seconds for publishing stats (default: shown below) # Optional: interval in seconds for publishing stats (default: shown below)
stats_interval: 60 stats_interval: 60
```
## `cameras` # Optional: Detectors configuration. Defaults to a single CPU detector
detectors:
# Required: name of the detector
coral:
# Required: type of the detector
# Valid values are 'edgetpu' (requires device property below) and 'cpu'.
type: edgetpu
# Optional: device name as defined here: https://coral.ai/docs/edgetpu/multiple-edgetpu/#using-the-tensorflow-lite-python-api
device: usb
# Optional: num_threads value passed to the tflite.Interpreter (default: shown below)
# This value is only used for CPU types
num_threads: 3
Each of your cameras must be configured. The following is the minimum required to register a camera in Frigate. Check the [camera configuration page](cameras.md) for a complete list of options. # Optional: Database configuration
```yaml
cameras:
# Name of your camera
front_door:
ffmpeg:
inputs:
- path: rtsp://viewer:{FRIGATE_RTSP_PASSWORD}@10.0.10.10:554/cam/realmonitor?channel=1&subtype=2
roles:
- detect
- rtmp
detect:
width: 1280
height: 720
fps: 5
```
## Optional
### `database`
```yaml
database: database:
# The path to store the SQLite DB (default: shown below) # The path to store the SQLite DB (default: shown below)
path: /media/frigate/frigate.db path: /media/frigate/frigate.db
```
### `model`
```yaml
# Optional: model modifications # Optional: model modifications
model: model:
# Optional: path to the model (default: automatic based on detector)
path: /edgetpu_model.tflite
# Optional: path to the labelmap (default: shown below)
labelmap_path: /labelmap.txt
# Required: Object detection model input width (default: shown below) # Required: Object detection model input width (default: shown below)
width: 320 width: 320
# Required: Object detection model input height (default: shown below) # Required: Object detection model input height (default: shown below)
height: 320 height: 320
# Optional: Label name modifications # Optional: Label name modifications. These are merged into the standard labelmap.
labelmap: labelmap:
2: vehicle # previously "car" 2: vehicle
```
### `detectors`
Check the [detectors configuration page](detectors.md) for a complete list of options.
### `logger`
```yaml
# Optional: logger verbosity settings # Optional: logger verbosity settings
logger: logger:
# Optional: Default log verbosity (default: shown below) # Optional: Default log verbosity (default: shown below)
@ -121,102 +104,12 @@ logger:
# Optional: Component specific logger overrides # Optional: Component specific logger overrides
logs: logs:
frigate.event: debug frigate.event: debug
```
### `record` # Optional: set environment variables
environment_vars:
EXAMPLE_VAR: value
Can be overridden at the camera level. 24/7 recordings can be enabled and are stored at `/media/frigate/recordings`. The folder structure for the recordings is `YYYY-MM/DD/HH/<camera_name>/MM.SS.mp4`. These recordings are written directly from your camera stream without re-encoding and are available in Home Assistant's media browser. Each camera supports a configurable retention policy in the config. # Optional: birdseye configuration
Exported clips are also created off of these recordings. Frigate chooses the largest matching retention value between the recording retention and the event retention when determining if a recording should be removed.
These recordings will not be playable in the web UI or in Home Assistant's media browser unless your camera sends video as h264.
:::caution
Previous versions of frigate included `-vsync drop` in input parameters. This is not compatible with FFmpeg's segment feature and must be removed from your input parameters if you have overrides set.
:::
```yaml
record:
# Optional: Enable recording (default: shown below)
enabled: False
# Optional: Number of days to retain (default: shown below)
retain_days: 0
# Optional: Event recording settings
events:
# Optional: Enable event recording retention settings (default: shown below)
enabled: False
# Optional: Maximum length of time to retain video during long events. (default: shown below)
# NOTE: If an object is being tracked for longer than this amount of time, the cache
# will begin to expire and the resulting clip will be the last x seconds of the event unless retain_days under record is > 0.
max_seconds: 300
# Optional: Number of seconds before the event to include (default: shown below)
pre_capture: 5
# Optional: Number of seconds after the event to include (default: shown below)
post_capture: 5
# Optional: Objects to save recordings for. (default: all tracked objects)
objects:
- person
# Optional: Restrict recordings to objects that entered any of the listed zones (default: no required zones)
required_zones: []
# Optional: Retention settings for events
retain:
# Required: Default retention days (default: shown below)
default: 10
# Optional: Per object retention days
objects:
person: 15
```
### `ffmpeg`
Can be overridden at the camera level.
```yaml
ffmpeg:
# Optional: global ffmpeg args (default: shown below)
global_args: -hide_banner -loglevel warning
# Optional: global hwaccel args (default: shown below)
# NOTE: See hardware acceleration docs for your specific device
hwaccel_args: []
# Optional: global input args (default: shown below)
input_args: -avoid_negative_ts make_zero -fflags +genpts+discardcorrupt -rtsp_transport tcp -stimeout 5000000 -use_wallclock_as_timestamps 1
# Optional: global output args
output_args:
# Optional: output args for detect streams (default: shown below)
detect: -f rawvideo -pix_fmt yuv420p
# Optional: output args for record streams (default: shown below)
record: -f segment -segment_time 60 -segment_format mp4 -reset_timestamps 1 -strftime 1 -c copy -an
# Optional: output args for rtmp streams (default: shown below)
rtmp: -c copy -f flv
```
### `objects`
Can be overridden at the camera level. For a list of available objects, see the [objects documentation](./objects.mdx).
```yaml
objects:
# Optional: list of objects to track from labelmap.txt (default: shown below)
track:
- person
# Optional: filters to reduce false positives for specific object types
filters:
person:
# Optional: minimum width*height of the bounding box for the detected object (default: 0)
min_area: 5000
# Optional: maximum width*height of the bounding box for the detected object (default: 24000000)
max_area: 100000
# Optional: minimum score for the object to initiate tracking (default: shown below)
min_score: 0.5
# Optional: minimum decimal percentage for tracked object's computed score to be considered a true positive (default: shown below)
threshold: 0.7
```
### `birdseye`
A dynamic combined camera view of all tracked cameras. This is optimized for minimal bandwidth and server resource utilization. Encoding is only performed when actively viewing the video feed, and only active (defined by the mode) cameras are included in the view.
```yaml
birdseye: birdseye:
# Optional: Enable birdseye view (default: shown below) # Optional: Enable birdseye view (default: shown below)
enabled: True enabled: True
@ -232,24 +125,169 @@ birdseye:
# motion - cameras are included if motion was detected in the last 30 seconds # motion - cameras are included if motion was detected in the last 30 seconds
# continuous - all cameras are included always # continuous - all cameras are included always
mode: objects mode: objects
```
### `rtmp` # Optional: ffmpeg configuration
ffmpeg:
# Optional: global ffmpeg args (default: shown below)
global_args: -hide_banner -loglevel warning
# Optional: global hwaccel args (default: shown below)
# NOTE: See hardware acceleration docs for your specific device
hwaccel_args: []
# Optional: global input args (default: shown below)
input_args: -avoid_negative_ts make_zero -fflags +genpts+discardcorrupt -rtsp_transport tcp -stimeout 5000000 -use_wallclock_as_timestamps 1
# Optional: global output args
output_args:
# Optional: output args for detect streams (default: shown below)
detect: -f rawvideo -pix_fmt yuv420p
# Optional: output args for record streams (default: shown below)
record: -f segment -segment_time 10 -segment_format mp4 -reset_timestamps 1 -strftime 1 -c copy -an
# Optional: output args for rtmp streams (default: shown below)
rtmp: -c copy -f flv
Can be overridden at the camera level. See the [cameras configuration page](cameras.md) for more information about RTMP streaming. # Optional: Detect configuration
# NOTE: Can be overridden at the camera level
detect:
# Optional: width of the frame for the input with the detect role (default: shown below)
width: 1280
# Optional: height of the frame for the input with the detect role (default: shown below)
height: 720
# Optional: desired fps for your camera for the input with the detect role (default: shown below)
# NOTE: Recommended value of 5. Ideally, try and reduce your FPS on the camera.
fps: 5
# Optional: enables detection for the camera (default: True)
# This value can be set via MQTT and will be updated in startup based on retained value
enabled: True
# Optional: Number of frames without a detection before frigate considers an object to be gone. (default: 5x the frame rate)
max_disappeared: 25
```yaml # Optional: Object configuration
# NOTE: Can be overridden at the camera level
objects:
# Optional: list of objects to track from labelmap.txt (default: shown below)
track:
- person
# Optional: mask to prevent all object types from being detected in certain areas (default: no mask)
# Checks based on the bottom center of the bounding box of the object.
# NOTE: This mask is COMBINED with the object type specific mask below
mask: 0,0,1000,0,1000,200,0,200
# Optional: filters to reduce false positives for specific object types
filters:
person:
# Optional: minimum width*height of the bounding box for the detected object (default: 0)
min_area: 5000
# Optional: maximum width*height of the bounding box for the detected object (default: 24000000)
max_area: 100000
# Optional: minimum score for the object to initiate tracking (default: shown below)
min_score: 0.5
# Optional: minimum decimal percentage for tracked object's computed score to be considered a true positive (default: shown below)
threshold: 0.7
# Optional: mask to prevent this object type from being detected in certain areas (default: no mask)
# Checks based on the bottom center of the bounding box of the object
mask: 0,0,1000,0,1000,200,0,200
# Optional: Motion configuration
# NOTE: Can be overridden at the camera level
motion:
# Optional: The threshold passed to cv2.threshold to determine if a pixel is different enough to be counted as motion. (default: shown below)
# Increasing this value will make motion detection less sensitive and decreasing it will make motion detection more sensitive.
# The value should be between 1 and 255.
threshold: 25
# Optional: Minimum size in pixels in the resized motion image that counts as motion (default: ~0.17% of the motion frame area)
# Increasing this value will prevent smaller areas of motion from being detected. Decreasing will make motion detection more sensitive to smaller
# moving objects.
contour_area: 100
# Optional: Alpha value passed to cv2.accumulateWeighted when averaging the motion delta across multiple frames (default: shown below)
# Higher values mean the current frame impacts the delta a lot, and a single raindrop may register as motion.
# Too low and a fast moving person wont be detected as motion.
delta_alpha: 0.2
# Optional: Alpha value passed to cv2.accumulateWeighted when averaging frames to determine the background (default: shown below)
# Higher values mean the current frame impacts the average a lot, and a new object will be averaged into the background faster.
# Low values will cause things like moving shadows to be detected as motion for longer.
# https://www.geeksforgeeks.org/background-subtraction-in-an-image-using-concept-of-running-average/
frame_alpha: 0.2
# Optional: Height of the resized motion frame (default: 1/6th of the original frame height, but no less than 180)
# This operates as an efficient blur alternative. Higher values will result in more granular motion detection at the expense of higher CPU usage.
# Lower values result in less CPU, but small changes may not register as motion.
frame_height: 180
# Optional: motion mask
# NOTE: see docs for more detailed info on creating masks
mask: 0,900,1080,900,1080,1920,0,1920
# Optional: Record configuration
# NOTE: Can be overridden at the camera level
record:
# Optional: Enable recording (default: shown below)
enabled: False
# Optional: Number of days to retain recordings regardless of events (default: shown below)
# NOTE: This should be set to 0 and retention should be defined in events section below
# if you only want to retain recordings of events.
retain_days: 0
# Optional: Event recording settings
events:
# Optional: Maximum length of time to retain video during long events. (default: shown below)
# NOTE: If an object is being tracked for longer than this amount of time, the retained recordings
# will be the last x seconds of the event unless retain_days under record is > 0.
max_seconds: 300
# Optional: Number of seconds before the event to include (default: shown below)
pre_capture: 5
# Optional: Number of seconds after the event to include (default: shown below)
post_capture: 5
# Optional: Objects to save recordings for. (default: all tracked objects)
objects:
- person
# Optional: Restrict recordings to objects that entered any of the listed zones (default: no required zones)
required_zones: []
# Optional: Retention settings for recordings of events
retain:
# Required: Default retention days (default: shown below)
default: 10
# Optional: Per object retention days
objects:
person: 15
# Optional: Configuration for the jpg snapshots written to the clips directory for each event
# NOTE: Can be overridden at the camera level
snapshots:
# Optional: Enable writing jpg snapshot to /media/frigate/clips (default: shown below)
# This value can be set via MQTT and will be updated in startup based on retained value
enabled: False
# Optional: print a timestamp on the snapshots (default: shown below)
timestamp: False
# Optional: draw bounding box on the snapshots (default: shown below)
bounding_box: False
# Optional: crop the snapshot (default: shown below)
crop: False
# Optional: height to resize the snapshot to (default: original size)
height: 175
# Optional: Restrict snapshots to objects that entered any of the listed zones (default: no required zones)
required_zones: []
# Optional: Camera override for retention settings (default: global values)
retain:
# Required: Default retention days (default: shown below)
default: 10
# Optional: Per object retention days
objects:
person: 15
# Optional: RTMP configuration
# NOTE: Can be overridden at the camera level
rtmp: rtmp:
# Optional: Enable the RTMP stream (default: True) # Optional: Enable the RTMP stream (default: True)
enabled: True enabled: True
```
## `timestamp_style` # Optional: Live stream configuration for WebUI
# NOTE: Can be overridden at the camera level
live:
# Optional: Set the height of the live stream. (default: 720)
# This must be less than or equal to the height of the detect stream. Lower resolutions
# reduce bandwidth required for viewing the live stream. Width is computed to match known aspect ratio.
height: 720
# Optional: Set the encode quality of the live stream (default: shown below)
# 1 is the highest quality, and 31 is the lowest. Lower quality feeds utilize less CPU resources.
quality: 8
Can be overridden at the camera level. See the [cameras configuration page](cameras.md) for more information about timestamp styling.
```yaml
# Optional: in-feed timestamp style configuration # Optional: in-feed timestamp style configuration
# NOTE: Can be overridden at the camera level
timestamp_style: timestamp_style:
# Optional: Position of the timestamp (default: shown below) # Optional: Position of the timestamp (default: shown below)
# "tl" (top left), "tr" (top right), "bl" (bottom left), "br" (bottom right) # "tl" (top left), "tr" (top right), "bl" (bottom left), "br" (bottom right)
@ -264,8 +302,6 @@ timestamp_style:
red: 255 red: 255
green: 255 green: 255
blue: 255 blue: 255
# Optional: Scale factor for font (default: shown below)
scale: 1.0
# Optional: Line thickness of font (default: shown below) # Optional: Line thickness of font (default: shown below)
thickness: 2 thickness: 2
# Optional: Effect of lettering (default: shown below) # Optional: Effect of lettering (default: shown below)
@ -273,4 +309,79 @@ timestamp_style:
# "solid" (solid background in inverse color of font) # "solid" (solid background in inverse color of font)
# "shadow" (shadow for font) # "shadow" (shadow for font)
effect: None effect: None
```
# Required
cameras:
# Required: name of the camera
back:
# Required: ffmpeg settings for the camera
ffmpeg:
# Required: A list of input streams for the camera. See documentation for more information.
inputs:
# Required: the path to the stream
# NOTE: Environment variables that begin with 'FRIGATE_' may be referenced in {}
- path: rtsp://viewer:{FRIGATE_RTSP_PASSWORD}@10.0.10.10:554/cam/realmonitor?channel=1&subtype=2
# Required: list of roles for this stream. valid values are: detect,record,rtmp
# NOTICE: In addition to assigning the record, and rtmp roles,
# they must also be enabled in the camera config.
roles:
- detect
- rtmp
# Optional: stream specific global args (default: inherit)
# global_args:
# Optional: stream specific hwaccel args (default: inherit)
# hwaccel_args:
# Optional: stream specific input args (default: inherit)
# input_args:
# Optional: camera specific global args (default: inherit)
# global_args:
# Optional: camera specific hwaccel args (default: inherit)
# hwaccel_args:
# Optional: camera specific input args (default: inherit)
# input_args:
# Optional: camera specific output args (default: inherit)
# output_args:
# Optional: timeout for highest scoring image before allowing it
# to be replaced by a newer image. (default: shown below)
best_image_timeout: 60
# Optional: zones for this camera
zones:
# Required: name of the zone
# NOTE: This must be different than any camera names, but can match with another zone on another
# camera.
front_steps:
# Required: List of x,y coordinates to define the polygon of the zone.
# NOTE: Coordinates can be generated at https://www.image-map.net/
coordinates: 545,1077,747,939,788,805
# Optional: List of objects that can trigger this zone (default: all tracked objects)
objects:
- person
# Optional: Zone level object filters.
# NOTE: The global and camera filters are applied upstream.
filters:
person:
min_area: 5000
max_area: 100000
threshold: 0.7
# Optional: Configuration for the jpg snapshots published via MQTT
mqtt:
# Optional: Enable publishing snapshot via mqtt for camera (default: shown below)
# NOTE: Only applies to publishing image data to MQTT via 'frigate/<camera_name>/<object_name>/snapshot'.
# All other messages will still be published.
enabled: True
# Optional: print a timestamp on the snapshots (default: shown below)
timestamp: True
# Optional: draw bounding box on the snapshots (default: shown below)
bounding_box: True
# Optional: crop the snapshot (default: shown below)
crop: True
# Optional: height to resize the snapshot to (default: shown below)
height: 270
# Optional: jpeg encode quality (default: shown below)
quality: 70
# Optional: Restrict mqtt messages to objects that entered any of the listed zones (default: no required zones)
required_zones: []
```

39
docs/docs/configuration/masks.md Normal file
View File

@ -0,0 +1,39 @@
---
id: masks
title: Masks
---
There are two types of masks available:
**Motion masks**: Motion masks are used to prevent unwanted types of motion from triggering detection. Try watching the debug feed with `Motion Boxes` enabled to see what may be regularly detected as motion. For example, you want to mask out your timestamp, the sky, rooftops, etc. Keep in mind that this mask only prevents motion from being detected and does not prevent objects from being detected if object detection was started due to motion in unmasked areas. Motion is also used during object tracking to refine the object detection area in the next frame. Over masking will make it more difficult for objects to be tracked. To see this effect, create a mask, and then watch the video feed with `Motion Boxes` enabled again.
**Object filter masks**: Object filter masks are used to filter out false positives for a given object type based on location. These should be used to filter any areas where it is not possible for an object of that type to be. The bottom center of the detected object's bounding box is evaluated against the mask. If it is in a masked area, it is assumed to be a false positive. For example, you may want to mask out rooftops, walls, the sky, treetops for people. For cars, masking locations other than the street or your driveway will tell frigate that anything in your yard is a false positive.
To create a poly mask:
1. Visit the Web UI
1. Click the camera you wish to create a mask for
1. Select "Debug" at the top
1. Expand the "Options" below the video feed
1. Click "Mask & Zone creator"
1. Click "Add" on the type of mask or zone you would like to create
1. Click on the camera's latest image to create a masked area. The yaml representation will be updated in real-time
1. When you've finished creating your mask, click "Copy" and paste the contents into your config file and restart Frigate
Example of a finished row corresponding to the below example image:
```yaml
motion:
mask: "0,461,3,0,1919,0,1919,843,1699,492,1344,458,1346,336,973,317,869,375,866,432"
```
Multiple masks can be listed.
```yaml
motion:
mask:
- 458,1346,336,973,317,869,375,866,432
- 0,461,3,0,1919,0,1919,843,1699,492,1344
```
![poly](/img/example-mask-poly.png)

19
docs/docs/configuration/nvdec.md
View File

@ -1,6 +1,6 @@
--- ---
id: nvdec id: nvdec
title: nVidia hardware decoder title: NVIDIA hardware decoder
--- ---
Certain nvidia cards include a hardware decoder, which can greatly improve the Certain nvidia cards include a hardware decoder, which can greatly improve the
@ -23,7 +23,7 @@ In order to pass NVDEC, the docker engine must be set to `nvidia` and the enviro
In a docker compose file, these lines need to be set: In a docker compose file, these lines need to be set:
``` ```yaml
services: services:
frigate: frigate:
... ...
@ -41,7 +41,7 @@ The decoder you choose will depend on the input video.
A list of supported codecs (you can use `ffmpeg -decoders | grep cuvid` in the container to get a list) A list of supported codecs (you can use `ffmpeg -decoders | grep cuvid` in the container to get a list)
``` ```shell
V..... h263_cuvid Nvidia CUVID H263 decoder (codec h263) V..... h263_cuvid Nvidia CUVID H263 decoder (codec h263)
V..... h264_cuvid Nvidia CUVID H264 decoder (codec h264) V..... h264_cuvid Nvidia CUVID H264 decoder (codec h264)
V..... hevc_cuvid Nvidia CUVID HEVC decoder (codec hevc) V..... hevc_cuvid Nvidia CUVID HEVC decoder (codec hevc)
@ -57,10 +57,9 @@ A list of supported codecs (you can use `ffmpeg -decoders | grep cuvid` in the c
For example, for H265 video (hevc), you'll select `hevc_cuvid`. Add For example, for H265 video (hevc), you'll select `hevc_cuvid`. Add
`-c:v hevc_cuvid` to your ffmpeg input arguments: `-c:v hevc_cuvid` to your ffmpeg input arguments:
``` ```yaml
ffmpeg: ffmpeg:
input_args: input_args: ...
...
- -c:v - -c:v
- hevc_cuvid - hevc_cuvid
``` ```
@ -100,10 +99,10 @@ processes:
To further improve performance, you can set ffmpeg to skip frames in the output, To further improve performance, you can set ffmpeg to skip frames in the output,
using the fps filter: using the fps filter:
``` ```yaml
output_args: output_args:
- -filter:v - -filter:v
- fps=fps=5 - fps=fps=5
``` ```
This setting, for example, allows Frigate to consume my 10-15fps camera streams on This setting, for example, allows Frigate to consume my 10-15fps camera streams on

7
docs/docs/configuration/objects.mdx
View File

@ -1,12 +1,11 @@
--- ---
id: objects id: objects
title: Default available objects title: Objects
sidebar_label: Available objects
--- ---
import labels from "../../../labelmap.txt"; import labels from "../../../labelmap.txt";
By default, Frigate includes the following object models from the Google Coral test data. By default, Frigate includes the following object models from the Google Coral test data. Note that `car` is listed twice because `truck` has been renamed to `car` by default. These object types are frequently confused.
<ul> <ul>
{labels.split("\n").map((label) => ( {labels.split("\n").map((label) => (
@ -22,4 +21,4 @@ Models for both CPU and EdgeTPU (Coral) are bundled in the image. You can use yo
- EdgeTPU Model: `/edgetpu_model.tflite` - EdgeTPU Model: `/edgetpu_model.tflite`
- Labels: `/labelmap.txt` - Labels: `/labelmap.txt`
You also need to update the model width/height in the config if they differ from the defaults. You also need to update the [model config](/configuration/advanced#model) if they differ from the defaults.

73
docs/docs/configuration/optimizing.md
View File

@ -1,73 +0,0 @@
---
id: optimizing
title: Optimizing performance
---
- **Google Coral**: It is strongly recommended to use a Google Coral, Frigate will no longer fall back to CPU in the event one is not found. Offloading TensorFlow to the Google Coral is an order of magnitude faster and will reduce your CPU load dramatically. A $60 device will outperform $2000 CPU. Frigate should work with any supported Coral device from https://coral.ai
- **Resolution**: For the `detect` input, choose a camera resolution where the smallest object you want to detect barely fits inside a 300x300px square. The model used by Frigate is trained on 300x300px images, so you will get worse performance and no improvement in accuracy by using a larger resolution since Frigate resizes the area where it is looking for objects to 300x300 anyway.
- **FPS**: 5 frames per second should be adequate. Higher frame rates will require more CPU usage without improving detections or accuracy. Reducing the frame rate on your camera will have the greatest improvement on system resources.
- **Hardware Acceleration**: Make sure you configure the `hwaccel_args` for your hardware. They provide a significant reduction in CPU usage if they are available.
- **Masks**: Masks can be used to ignore motion and reduce your idle CPU load. If you have areas with regular motion such as timestamps or trees blowing in the wind, frigate will constantly try to determine if that motion is from a person or other object you are tracking. Those detections not only increase your average CPU usage, but also clog the pipeline for detecting objects elsewhere. If you are experiencing high values for `detection_fps` when no objects of interest are in the cameras, you should use masks to tell frigate to ignore movement from trees, bushes, timestamps, or any part of the image where detections should not be wasted looking for objects.
### FFmpeg Hardware Acceleration
Frigate works on Raspberry Pi 3b/4 and x86 machines. It is recommended to update your configuration to enable hardware accelerated decoding in ffmpeg. Depending on your system, these parameters may not be compatible.
Raspberry Pi 3/4 (32-bit OS)
Ensure you increase the allocated RAM for your GPU to at least 128 (raspi-config > Performance Options > GPU Memory).
**NOTICE**: If you are using the addon, ensure you turn off `Protection mode` for hardware acceleration.
```yaml
ffmpeg:
hwaccel_args:
- -c:v
- h264_mmal
```
Raspberry Pi 3/4 (64-bit OS)
**NOTICE**: If you are using the addon, ensure you turn off `Protection mode` for hardware acceleration.
```yaml
ffmpeg:
hwaccel_args:
- -c:v
- h264_v4l2m2m
```
Intel-based CPUs (<10th Generation) via Quicksync (https://trac.ffmpeg.org/wiki/Hardware/QuickSync)
```yaml
ffmpeg:
hwaccel_args:
- -hwaccel
- vaapi
- -hwaccel_device
- /dev/dri/renderD128
- -hwaccel_output_format
- yuv420p
```
Intel-based CPUs (>=10th Generation) via Quicksync (https://trac.ffmpeg.org/wiki/Hardware/QuickSync)
```yaml
ffmpeg:
hwaccel_args:
- -hwaccel
- qsv
- -qsv_device
- /dev/dri/renderD128
```
AMD/ATI GPUs (Radeon HD 2000 and newer GPUs) via libva-mesa-driver (https://trac.ffmpeg.org/wiki/Hardware/QuickSync)
**Note:** You also need to set `LIBVA_DRIVER_NAME=radeonsi` as an environment variable on the container.
```yaml
ffmpeg:
hwaccel_args:
- -hwaccel
- vaapi
- -hwaccel_device
- /dev/dri/renderD128
```
Nvidia GPU based decoding via NVDEC is supported, but requires special configuration. See the [nvidia NVDEC documentation](/configuration/nvdec) for more details.

10
docs/docs/configuration/record.md Normal file
View File

@ -0,0 +1,10 @@
---
id: record
title: Recording
---
Recordings can be enabled and are stored at `/media/frigate/recordings`. The folder structure for the recordings is `YYYY-MM/DD/HH/<camera_name>/MM.SS.mp4`. These recordings are written directly from your camera stream without re-encoding. Each camera supports a configurable retention policy in the config.
Exported clips are also created off of these recordings. Frigate chooses the largest matching retention value between the recording retention and the event retention when determining if a recording should be removed.
H265 recordings can be viewed in Edge and Safari only. All other browsers require recordings to be encoded with H264.

8
docs/docs/configuration/rtmp.md Normal file
View File

@ -0,0 +1,8 @@
---
id: rtmp
title: RTMP
---
Frigate can re-stream your video feed as a RTMP feed for other applications such as Home Assistant to utilize it at `rtmp://<frigate_host>/live/<camera_name>`. Port 1935 must be open. This allows you to use a video feed for detection in frigate and Home Assistant live view at the same time without having to make two separate connections to the camera. The video feed is copied from the original video feed directly to avoid re-encoding. This feed does not include any annotation by Frigate.
Some video feeds are not compatible with RTMP. If you are experiencing issues, check to make sure your camera feed is h264 with AAC audio. If your camera doesn't support a compatible format for RTMP, you can use the ffmpeg args to re-encode it on the fly at the expense of increased CPU utilization.

6
docs/docs/configuration/snapshots.md Normal file
View File

@ -0,0 +1,6 @@
---
id: snapshots
title: Snapshots
---
Frigate can save a snapshot image to `/media/frigate/clips` for each event named as `<camera>-<id>.jpg`.

10
docs/docs/configuration/zones.md Normal file
View File

@ -0,0 +1,10 @@
---
id: zones
title: Zones
---
Zones allow you to define a specific area of the frame and apply additional filters for object types so you can determine whether or not an object is within a particular area. Zones cannot have the same name as a camera. If desired, a single zone can include multiple cameras if you have multiple cameras covering the same area by configuring zones with the same name for each camera.
During testing, enable the Zones option for the debug feed so you can adjust as needed. The zone line will increase in thickness when any object enters the zone.
To create a zone, follow [the steps for a "Motion mask"](/configuration/masks), but use the section of the web UI for creating a zone instead.

8
docs/docs/troubleshooting.md → docs/docs/faqs.md
View File

@ -1,8 +1,12 @@
--- ---
id: troubleshooting id: faqs
title: Troubleshooting and FAQ title: Frequently Asked Questions
--- ---
### Fatal Python error: Bus error
This error message is due to a shm-size that is too small. Try updating your shm-size according to [this guide](/installation#calculating-required-shm-size).
### I am seeing a solid green image for my camera. ### I am seeing a solid green image for my camera.
A solid green image means that frigate has not received any frames from ffmpeg. Check the logs to see why ffmpeg is exiting and adjust your ffmpeg args accordingly. A solid green image means that frigate has not received any frames from ffmpeg. Check the logs to see why ffmpeg is exiting and adjust your ffmpeg args accordingly.

47
docs/docs/guides/camera_setup.md Normal file
View File

@ -0,0 +1,47 @@
---
id: camera_setup
title: Camera setup
---
Cameras configured to output H.264 video and AAC audio will offer the most compatibility with all features of Frigate and Home Assistant. H.265 has better compression, but far less compatibility. Safari and Edge are the only browsers able to play H.265. Ideally, cameras should be configured directly for the desired resolutions and frame rates you want to use in Frigate. Reducing frame rates within Frigate will waste CPU resources decoding extra frames that are discarded. There are three different goals that you want to tune your stream configurations around.
- **Detection**: This is the only stream that Frigate will decode for processing. Also, this is the stream where snapshots will be generated from. The resolution for detection should be tuned for the size of the objects you want to detect. See [Choosing a detect resolution](#choosing-a-detect-resolution) for more details. The recommended frame rate is 5fps, but may need to be higher for very fast moving objects. Higher resolutions and frame rates will drive higher CPU usage on your server.
- **Recording**: This stream should be the resolution you wish to store for reference. Typically, this will be the highest resolution your camera supports. I recommend setting this feed to 15 fps.
- **Stream Viewing**: This stream will be rebroadcast as is to Home Assistant for viewing with the stream component. Setting this resolution too high will use significant bandwidth when viewing streams in Home Assistant, and they may not load reliably over slower connections.
### Choosing a detect resolution
The ideal resolution for detection is one where the objects you want to detect fit inside the dimensions of the model used by Frigate (320x320). Frigate does not pass the entire camera frame to object detection. It will crop an area of motion from the full frame and look in that portion of the frame. If the area being inspected is larger than 320x320, Frigate must resize it before running object detection. Higher resolutions do not improve the detection accuracy because the additional detail is lost in the resize. Below you can see a reference for how large a 320x320 area is against common resolutions.
Larger resolutions **do** improve performance if the objects are very small in the frame.
![Resolutions](/img/resolutions.png)
### Example Camera Configuration
For the Dahua/Loryta 5442 camera, I use the following settings:
**Main Stream (Recording)**
- Encode Mode: H.264
- Resolution: 2688\*1520
- Frame Rate(FPS): 15
- I Frame Interval: 30
**Sub Stream 1 (RTMP)**
- Enable: Sub Stream 1
- Encode Mode: H.264
- Resolution: 720\*576
- Frame Rate: 10
- I Frame Interval: 10
**Sub Stream 2 (Detection)**
- Enable: Sub Stream 2
- Encode Mode: H.264
- Resolution: 1280\*720
- Frame Rate: 5
- I Frame Interval: 5

0
docs/docs/configuration/false_positives.md → docs/docs/guides/false_positives.md
View File

193
docs/docs/guides/getting_started.md Normal file
View File

@ -0,0 +1,193 @@
---
id: getting_started
title: Creating a config file
---
This guide walks through the steps to build a configuration file for Frigate. It assumes that you already have an environment setup as described in [Installation](/installation). You should also configure your cameras according to the [camera setup guide](/guides/camera_setup)
### Step 1: Configure the MQTT server
Frigate requires a functioning MQTT server. Start by adding the mqtt section at the top level in your config:
```yaml
mqtt:
host: <ip of your mqtt server>
```
If using the Mosquitto Addon in Home Assistant, a username and password is required. For example:
```yaml
mqtt:
host: <ip of your mqtt server>
user: <username>
password: <password>
```
Frigate supports many configuration options for mqtt. See the [configuration reference](/configuration/index#full-configuration-reference) for more info.
### Step 2: Configure detectors
By default, Frigate will use a single CPU detector. If you have a USB Coral, you will need to add a detectors section to your config.
```yaml
mqtt:
host: <ip of your mqtt server>
detectors:
coral:
type: edgetpu
device: usb
```
More details on available detectors can be found [here](/configuration/detectors).
### Step 3: Add a minimal camera configuration
Now let's add the first camera:
```yaml
mqtt:
host: <ip of your mqtt server>
detectors:
coral:
type: edgetpu
device: usb
cameras:
camera_1: # <------ Name the camera
ffmpeg:
inputs:
- path: rtsp://10.0.10.10:554/rtsp # <----- Update for your camera
roles:
- detect
- rtmp
detect:
width: 1280 # <---- update for your camera's resolution
height: 720 # <---- update for your camera's resolution
```
### Step 4: Start Frigate
At this point you should be able to start Frigate and see the the video feed in the UI.
If you get a green image from the camera, this means ffmpeg was not able to get the video feed from your camera. Check the logs for error messages from ffmpeg. The default ffmpeg arguments are designed to work with RTSP cameras that support TCP connections. FFmpeg arguments for other types of cameras can be found [here](/configuration/camera_specific).
### Step 5: Configure hardware acceleration (optional)
Now that you have a working camera configuration, you want to setup hardware acceleration to minimize the CPU required to decode your video streams. See the [hardware acceleration](/configuration/hardware_acceleration) config reference for examples applicable to your hardware.
In order to best evaluate the performance impact of hardware acceleration, it is recommended to temporarily disable detection.
```yaml
mqtt: ...
detectors: ...
cameras:
camera_1:
ffmpeg: ...
detect:
enabled: False
...
```
Here is an example configuration with hardware acceleration configured:
```yaml
mqtt: ...
detectors: ...
cameras:
camera_1:
ffmpeg:
inputs: ...
hwaccel_args: -c:v h264_v4l2m2m
detect: ...
```
### Step 6: Setup motion masks
Now that you have optimized your configuration for decoding the video stream, you will want to check to see where to implement motion masks. To do this, navigate to the camera in the UI, select "Debug" at the top, and enable "Motion boxes" in the options below the video feed. Watch for areas that continuously trigger unwanted motion to be detected. Common areas to mask include camera timestamps and trees that frequently blow in the wind. The goal is to avoid wasting object detection cycles looking at these areas.
Now that you know where you need to mask, use the "Mask & Zone creator" in the options pane to generate the coordinates needed for your config file. More information about masks can be found [here](/configuration/masks).
:::caution
Note that motion masks should not be used to mark out areas where you do not want objects to be detected or to reduce false positives. They do not alter the image sent to object detection, so you can still get events and detections in areas with motion masks. These only prevent motion in these areas from initiating object detection.
:::
Your configuration should look similar to this now.
```yaml
mqtt:
host: mqtt.local
detectors:
coral:
type: edgetpu
device: usb
cameras:
camera_1:
ffmpeg:
inputs:
- path: rtsp://10.0.10.10:554/rtsp
roles:
- detect
- rtmp
detect:
width: 1280
height: 720
motion:
mask:
- 0,461,3,0,1919,0,1919,843,1699,492,1344,458,1346,336,973,317,869,375,866,432
```
### Step 7: Enable recording (optional)
To enable recording video, add the `record` role to a stream and enable it in the config.
```yaml
mqtt: ...
detectors: ...
cameras:
camera_1:
ffmpeg:
inputs:
- path: rtsp://10.0.10.10:554/rtsp
roles:
- detect
- rtmp
- record # <----- Add role
detect: ...
record: # <----- Enable recording
enabled: True
motion: ...
```
By default, Frigate will retain video of all events for 10 days. The full set of options for recording can be found [here](/configuration/index#full-configuration-reference).
### Step 8: Enable snapshots (optional)
To enable snapshots of your events, just enable it in the config.
```yaml
mqtt: ...
detectors: ...
cameras:
camera_1: ...
detect: ...
record: ...
snapshots: # <----- Enable snapshots
enabled: True
motion: ...
```
By default, Frigate will retain snapshots of all events for 10 days. The full set of options for snapshots can be found [here](/configuration/index#full-configuration-reference).

29
docs/docs/hardware.md
View File

@ -7,23 +7,34 @@ title: Recommended hardware
Cameras that output H.264 video and AAC audio will offer the most compatibility with all features of Frigate and Home Assistant. It is also helpful if your camera supports multiple substreams to allow different resolutions to be used for detection, streaming, and recordings without re-encoding. Cameras that output H.264 video and AAC audio will offer the most compatibility with all features of Frigate and Home Assistant. It is also helpful if your camera supports multiple substreams to allow different resolutions to be used for detection, streaming, and recordings without re-encoding.
## Computer I recommend Dahua, Hikvision, and Amcrest in that order. Dahua edges out Hikvision because they are easier to find and order, not because they are better cameras. I personally use Dahua cameras because they are easier to purchase directly. In my experience Dahua and Hikvision both have multiple streams with configurable resolutions and frame rates and rock solid streams. They also both have models with large sensors well known for excellent image quality at night. Not all the models are equal. Larger sensors are better than higher resolutions; especially at night. Amcrest is the fallback recommendation because they are rebranded Dahuas. They are rebranding the lower end models with smaller sensors or less configuration options.
Here are some of the camera's I recommend:
- [Loryta(Dahua) T5442TM-AS-LED](https://www.amazon.com/Loryta-IPC-T5442TM-AS-LED-Starlight-Eyeball-Network/dp/B07S5QZJDH/)
- [Loryta(Dahua) IPC-T5442TM-AS](https://www.amazon.com/Loryta-IPC-T5442TM-AS-Starlight-Eyeball-Network/dp/B07S21FVC7/)
- [Amcrest IP5M-T1179EW-28MM](https://www.amazon.com/Amcrest-5-Megapixel-NightVision-Weatherproof-IP5M-T1179EW-28MM/dp/B083G9KT4C/)
## Server
My current favorite is the Minisforum GK41 because the dual NICs allow you to setup a dedicated private network for your cameras where they can be blocked from accessing the internet.
| Name | Inference Speed | Notes | | Name | Inference Speed | Notes |
| ----------------------- | --------------- | ----------------------------------------------------------------------------------------------------------------------------- | | ----------------------- | --------------- | ----------------------------------------------------------------------------------------------------------------------------- |
| Atomic Pi | 16ms | Good option for a dedicated low power board with a small number of cameras. Can leverage Intel QuickSync for stream decoding. | | Minisforum GK41 | 9-10ms | Great alternative to a NUC with dual Gigabit NICs. Easily handles several 1080p cameras. |
| Intel NUC NUC7i3BNK | 8-10ms | Great performance. Can handle many cameras at 5fps depending on typical amounts of motion. | | Intel NUC NUC7i3BNK | 8-10ms | Great performance. Can handle many cameras at 5fps depending on typical amounts of motion. |
| BMAX B2 Plus | 10-12ms | Good balance of performance and cost. Also capable of running many other services at the same time as frigate. | | BMAX B2 Plus | 10-12ms | Good balance of performance and cost. Also capable of running many other services at the same time as frigate. |
| Minisforum GK41 | 9-10ms | Great alternative to a NUC with dual Gigabit NICs. Easily handles several 1080p cameras. | | Atomic Pi | 16ms | Good option for a dedicated low power board with a small number of cameras. Can leverage Intel QuickSync for stream decoding. |
| Raspberry Pi 3B (32bit) | 60ms | Can handle a small number of cameras, but the detection speeds are slow due to USB 2.0. | | Raspberry Pi 3B (32bit) | 60ms | Can handle a small number of cameras, but the detection speeds are slow due to USB 2.0. |
| Raspberry Pi 4 (32bit) | 15-20ms | Can handle a small number of cameras. The 2GB version runs fine. | | Raspberry Pi 4 (32bit) | 15-20ms | Can handle a small number of cameras. The 2GB version runs fine. |
| Raspberry Pi 4 (64bit) | 10-15ms | Can handle a small number of cameras. The 2GB version runs fine. | | Raspberry Pi 4 (64bit) | 10-15ms | Can handle a small number of cameras. The 2GB version runs fine. |
## Unraid ## Google Coral TPU
Many people have powerful enough NAS devices or home servers to also run docker. There is a Unraid Community App. It is strongly recommended to use a Google Coral. Frigate is designed around the expectation that a Coral is used to achieve very low inference speeds. Offloading TensorFlow to the Google Coral is an order of magnitude faster and will reduce your CPU load dramatically. A $60 device will outperform $2000 CPU. Frigate should work with any supported Coral device from https://coral.ai
To install make sure you have the [community app plugin here](https://forums.unraid.net/topic/38582-plug-in-community-applications/). Then search for "Frigate" in the apps section within Unraid - you can see the online store [here](https://unraid.net/community/apps?q=frigate#r)
| Name | Inference Speed | Notes | The USB version is compatible with the widest variety of hardware and does not require a driver on the host machine. However, it does lack the automatic throttling features of the other versions.
| ------------------------------------ | --------------- | --------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| [M2 Coral Edge TPU](http://coral.ai) | 6.2ms | Install the Coral plugin from Unraid Community App Center [info here](https://forums.unraid.net/topic/98064-support-blakeblackshear-frigate/?do=findComment&comment=949789) | The PCIe and M.2 versions require installation of a driver on the host. Follow the instructions for your version from https://coral.ai
A single Coral can handle many cameras and will be sufficient for the majority of users. You can calculate the maximum performance of your Coral based on the inference speed reported by Frigate. With an inference speed of 10, your Coral will top out at `1000/10=100`, or 100 frames per second. If your detection fps is regularly getting close to that, you should first consider tuning motion masks. If those are already properly configured, a second Coral may be needed.

13
docs/docs/how-it-works.md
View File

@ -1,13 +0,0 @@
---
id: how-it-works
title: How Frigate Works
sidebar_label: How it works
---
Frigate is designed to minimize resource and maximize performance by only looking for objects when and where it is necessary
![Diagram](/img/diagram.png)
1. Look for Motion
2. Calculate Detection Regions
3. Run Object Detection

8
docs/docs/index.md
View File

@ -1,13 +1,12 @@
--- ---
id: index id: index
title: Frigate title: Introduction
sidebar_label: Features
slug: / slug: /
--- ---
A complete and local NVR designed for Home Assistant with AI object detection. Uses OpenCV and Tensorflow to perform realtime object detection locally for IP cameras. A complete and local NVR designed for Home Assistant with AI object detection. Uses OpenCV and Tensorflow to perform realtime object detection locally for IP cameras.
Use of a [Google Coral Accelerator](https://coral.ai/products/) is optional, but highly recommended. The Coral will outperform even the best CPUs and can process 100+ FPS with very little overhead. Use of a [Google Coral Accelerator](https://coral.ai/products/) is optional, but strongly recommended. CPU detection should only be used for testing purposes. The Coral will outperform even the best CPUs and can process 100+ FPS with very little overhead.
- Tight integration with Home Assistant via a [custom component](https://github.com/blakeblackshear/frigate-hass-integration) - Tight integration with Home Assistant via a [custom component](https://github.com/blakeblackshear/frigate-hass-integration)
- Designed to minimize resource use and maximize performance by only looking for objects when and where it is necessary - Designed to minimize resource use and maximize performance by only looking for objects when and where it is necessary
@ -15,8 +14,9 @@ Use of a [Google Coral Accelerator](https://coral.ai/products/) is optional, but
- Uses a very low overhead motion detection to determine where to run object detection - Uses a very low overhead motion detection to determine where to run object detection
- Object detection with TensorFlow runs in separate processes for maximum FPS - Object detection with TensorFlow runs in separate processes for maximum FPS
- Communicates over MQTT for easy integration into other systems - Communicates over MQTT for easy integration into other systems
- 24/7 recording - Recording with retention based on detected objects
- Re-streaming via RTMP to reduce the number of connections to your camera - Re-streaming via RTMP to reduce the number of connections to your camera
- A dynamic combined camera view of all tracked cameras.
## Screenshots ## Screenshots

123
docs/docs/installation.md
View File

@ -3,25 +3,42 @@ id: installation
title: Installation title: Installation
--- ---
Frigate is a Docker container that can be run on any Docker host including as a [HassOS Addon](https://www.home-assistant.io/addons/). See instructions below for installing the HassOS addon. Frigate is a Docker container that can be run on any Docker host including as a [HassOS Addon](https://www.home-assistant.io/addons/).
For Home Assistant users, there is also a [custom component (aka integration)](https://github.com/blakeblackshear/frigate-hass-integration). This custom component adds tighter integration with Home Assistant by automatically setting up camera entities, sensors, media browser for recordings, and a public API to simplify notifications. Frigate requires an MQTT broker. If using the Home Assistant integration, Frigate and Home Assistant must be connected to the same MQTT server to function properly.
Note that HassOS Addons and custom components are different things. If you are already running Frigate with Docker directly, you do not need the Addon since the Addon would run another instance of Frigate. ## Preparing your hardware
## HassOS Addon ### Operating System
HassOS users can install via the addon repository. Frigate requires an MQTT server. Frigate runs best with docker installed on bare metal debian-based distributions. For ideal performance, Frigate needs access to underlying hardware for the Coral and GPU devices. Running Frigate in a VM on top of Proxmox, ESXi, Virtualbox, etc. is not recommended. The virtualization layer often introduces a sizable amount of overhead for communication with Coral devices.
1. Navigate to Supervisor > Add-on Store > Repositories Windows is not officially supported, but some users have had success getting it to run under WSL or Virtualbox. Getting the GPU and/or Coral devices properly passed to Frigate may be difficult or impossible. Search previous discussions or issues for help.
2. Add https://github.com/blakeblackshear/frigate-hass-addons
3. Setup your network configuration in the `Configuration` tab if deisred ### Calculating required shm-size
4. Create the file `frigate.yml` in your `config` directory with your detailed Frigate configuration
5. Start the addon container Frigate utilizes shared memory to store frames during processing. The default `shm-size` provided by Docker is 64m.
6. If you are using hardware acceleration for ffmpeg, you will need to disable "Protection mode"
The default shm-size of 64m is fine for setups with 2 or less 1080p cameras. If frigate is exiting with "Bus error" messages, it is likely because you have too many high resolution cameras and you need to specify a higher shm size.
You can calculate the necessary shm-size for each camera with the following formula:
```
(width * height * 1.5 * 9 + 270480)/1048576 = <shm size in mb>
```
The shm size cannot be set per container for Home Assistant Addons. You must set `default-shm-size` in `/etc/docker/daemon.json` to increase the default shm size. This will increase the shm size for all of your docker containers. This may or may not cause issues with your setup. https://docs.docker.com/engine/reference/commandline/dockerd/#daemon-configuration-file
### Raspberry Pi 3/4
By default, the Raspberry Pi limits the amount of memory available to the GPU. In order to use ffmpeg hardware acceleration, you must increase the available memory by setting `gpu_mem` to the maximum recommended value in `config.txt` as described in the [official docs](https://www.raspberrypi.org/documentation/computers/config_txt.html#memory-options).
Additionally, the USB Coral draws a considerable amount of power. If using any other USB devices such as an SSD, you will experience instability due to the Pi not providing enough power to USB devices. You will need to purchase an external USB hub with it's own power supply. Some have reported success with [this](https://www.amazon.com/-/en/RSHTECH-Active-Splitter-Lightweight-Portable/dp/B091F7C5K4).
## Docker ## Docker
Running in Docker directly is the recommended install method.
Make sure you choose the right image for your architecture: Make sure you choose the right image for your architecture:
| Arch | Image Name | | Arch | Image Name |
@ -41,13 +58,14 @@ services:
privileged: true # this may not be necessary for all setups privileged: true # this may not be necessary for all setups
restart: unless-stopped restart: unless-stopped
image: blakeblackshear/frigate:<specify_version_tag> image: blakeblackshear/frigate:<specify_version_tag>
shm_size: "64mb" # update for your cameras based on calculation above
devices: devices:
- /dev/bus/usb:/dev/bus/usb - /dev/bus/usb:/dev/bus/usb # passes the USB Coral, needs to be modified for other versions
- /dev/dri/renderD128 # for intel hwaccel, needs to be updated for your hardware - /dev/dri/renderD128 # for intel hwaccel, needs to be updated for your hardware
volumes: volumes:
- /etc/localtime:/etc/localtime:ro - /etc/localtime:/etc/localtime:ro
- <path_to_config_file>:/config/config.yml:ro - /path/to/your/config.yml:/config/config.yml:ro
- <path_to_directory_for_media>:/media/frigate - /path/to/your/storage:/media/frigate
- type: tmpfs # Optional: 1GB of memory, reduces SSD/SD Card wear - type: tmpfs # Optional: 1GB of memory, reduces SSD/SD Card wear
target: /tmp/cache target: /tmp/cache
tmpfs: tmpfs:
@ -68,8 +86,9 @@ docker run -d \
--mount type=tmpfs,target=/tmp/cache,tmpfs-size=1000000000 \ --mount type=tmpfs,target=/tmp/cache,tmpfs-size=1000000000 \
--device /dev/bus/usb:/dev/bus/usb \ --device /dev/bus/usb:/dev/bus/usb \
--device /dev/dri/renderD128 \ --device /dev/dri/renderD128 \
-v <path_to_directory_for_media>:/media/frigate \ --shm-size=64m \
-v <path_to_config_file>:/config/config.yml:ro \ -v /path/to/your/storage:/media/frigate \
-v /path/to/your/config.yml:/config/config.yml:ro \
-v /etc/localtime:/etc/localtime:ro \ -v /etc/localtime:/etc/localtime:ro \
-e FRIGATE_RTSP_PASSWORD='password' \ -e FRIGATE_RTSP_PASSWORD='password' \
-p 5000:5000 \ -p 5000:5000 \
@ -77,48 +96,62 @@ docker run -d \
blakeblackshear/frigate:<specify_version_tag> blakeblackshear/frigate:<specify_version_tag>
``` ```
### Calculating shm-size ## Home Assistant Operating System (HassOS)
The default shm-size of 64m is fine for setups with 3 or less 1080p cameras. If frigate is exiting with "Bus error" messages, it could be because you have too many high resolution cameras and you need to specify a higher shm size. :::caution
You can calculate the necessary shm-size for each camera with the following formula: Due to limitations in Home Assistant Operating System, Frigate cannot utilize external storage for recordings or snapshots.
``` :::
(width * height * 1.5 * 7 + 270480)/1048576 = <shm size in mb>
:::tip
If possible, it is recommended to run Frigate standalone in Docker and use [Frigate's Proxy Addon](https://github.com/blakeblackshear/frigate-hass-addons/blob/main/frigate_proxy/README.md).
:::
HassOS users can install via the addon repository.
1. Navigate to Supervisor > Add-on Store > Repositories
2. Add https://github.com/blakeblackshear/frigate-hass-addons
3. Install your desired Frigate NVR Addon and navigate to it's page
4. Setup your network configuration in the `Configuration` tab
5. (not for proxy addon) Create the file `frigate.yml` in your `config` directory with your detailed Frigate configuration
6. Start the addon container
7. (not for proxy addon) If you are using hardware acceleration for ffmpeg, you may need to disable "Protection mode"
## Home Assistant Supervised
:::tip
If possible, it is recommended to run Frigate standalone in Docker and use [Frigate's Proxy Addon](https://github.com/blakeblackshear/frigate-hass-addons/blob/main/frigate_proxy/README.md).
:::
When running Home Assistant with the [Supervised install method](https://github.com/home-assistant/supervised-installer), you can get the benefit of running the Addon along with the ability to customize the storage used by Frigate.
In order to customize the storage location for Frigate, simply use `fstab` to mount the drive you want at `/usr/share/hassio/media`. Here is an example fstab entry:
```shell
UUID=1a65fec6-c25f-404a-b3d2-1f2fcf6095c8 /media/data ext4 defaults 0 0
/media/data/homeassistant/media /usr/share/hassio/media none bind 0 0
``` ```
The shm size cannot be set per container for Home Assistant Addons. You must set `default-shm-size` in `/etc/docker/daemon.json` to increase the default shm size. This will increase the shm size for all of your docker containers. This may or may not cause issues with your setup. https://docs.docker.com/engine/reference/commandline/dockerd/#daemon-configuration-file Then follow the instructions listed for [Home Assistant Operating System](#home-assistant-operating-system-hassos).
## Kubernetes ## Kubernetes
Use the [helm chart](https://github.com/blakeblackshear/blakeshome-charts/tree/master/charts/frigate). Use the [helm chart](https://github.com/blakeblackshear/blakeshome-charts/tree/master/charts/frigate).
## Virtualization ## Unraid
For ideal performance, Frigate needs access to underlying hardware for the Coral and GPU devices for ffmpeg decoding. Running Frigate in a VM on top of Proxmox, ESXi, Virtualbox, etc. is not recommended. The virtualization layer typically introduces a sizable amount of overhead for communication with Coral devices. Many people have powerful enough NAS devices or home servers to also run docker. There is a Unraid Community App.
To install make sure you have the [community app plugin here](https://forums.unraid.net/topic/38582-plug-in-community-applications/). Then search for "Frigate" in the apps section within Unraid - you can see the online store [here](https://unraid.net/community/apps?q=frigate#r)
### Proxmox ## Proxmox
Some people have had success running Frigate in LXC directly with the following config: It is recommended to run Frigate in LXC for maximum performance. See [this discussion](https://github.com/blakeblackshear/frigate/discussions/1111) for more information.
``` ## ESX
arch: amd64
cores: 2
features: nesting=1
hostname: FrigateLXC
memory: 4096
net0: name=eth0,bridge=vmbr0,firewall=1,hwaddr=2E:76:AE:5A:58:48,ip=dhcp,ip6=auto,type=veth
ostype: debian
rootfs: local-lvm:vm-115-disk-0,size=12G
swap: 512
lxc.cgroup.devices.allow: c 189:385 rwm
lxc.mount.entry: /dev/dri/renderD128 dev/dri/renderD128 none bind,optional,create=file
lxc.mount.entry: /dev/bus/usb/004/002 dev/bus/usb/004/002 none bind,optional,create=file
lxc.apparmor.profile: unconfined
lxc.cgroup.devices.allow: a
lxc.cap.drop:
```
### ESX
For details on running Frigate under ESX, see details [here](https://github.com/blakeblackshear/frigate/issues/305). For details on running Frigate under ESX, see details [here](https://github.com/blakeblackshear/frigate/issues/305).

20
docs/docs/usage/api.md → docs/docs/integrations/api.md
View File

@ -192,6 +192,10 @@ Permanently deletes the event along with any clips/snapshots.
Returns a thumbnail for the event id optimized for notifications. Works while the event is in progress and after completion. Passing `?format=android` will convert the thumbnail to 2:1 aspect ratio. Returns a thumbnail for the event id optimized for notifications. Works while the event is in progress and after completion. Passing `?format=android` will convert the thumbnail to 2:1 aspect ratio.
### `GET /api/events/<id>/clip.mp4`
Returns the clip for the event id. Works after the event has ended.
### `GET /api/events/<id>/snapshot.jpg` ### `GET /api/events/<id>/snapshot.jpg`
Returns the snapshot image for the event id. Works while the event is in progress and after completion. Returns the snapshot image for the event id. Works while the event is in progress and after completion.
@ -206,10 +210,22 @@ Accepts the following query string parameters, but they are only applied when an
| `crop` | int | Crop the snapshot to the (0 or 1) | | `crop` | int | Crop the snapshot to the (0 or 1) |
| `quality` | int | Jpeg encoding quality (0-100). Defaults to 70. | | `quality` | int | Jpeg encoding quality (0-100). Defaults to 70. |
### `/clips/<camera>-<id>.jpg` ### `GET /clips/<camera>-<id>.jpg`
JPG snapshot for the given camera and event id. JPG snapshot for the given camera and event id.
### `/vod/<year>-<month>/<day>/<hour>/<camera>/master.m3u8` ### `GET /vod/<year>-<month>/<day>/<hour>/<camera>/master.m3u8`
HTTP Live Streaming Video on Demand URL for the specified hour and camera. Can be viewed in an application like VLC. HTTP Live Streaming Video on Demand URL for the specified hour and camera. Can be viewed in an application like VLC.
### `GET /vod/event/<event-id>/index.m3u8`
HTTP Live Streaming Video on Demand URL for the specified event. Can be viewed in an application like VLC.
### `GET /vod/event/<event-id>/index.m3u8`
HTTP Live Streaming Video on Demand URL for the specified event. Can be viewed in an application like VLC.
### `GET /vod/<camera>/start/<start-timestamp>/end/<end-timestamp>/index.m3u8`
HTTP Live Streaming Video on Demand URL for the camera with the specified time range. Can be viewed in an application like VLC.

0
docs/docs/usage/home-assistant.md → docs/docs/integrations/home-assistant.md
View File

0
docs/docs/usage/howtos.md → docs/docs/integrations/howtos.md
View File

0
docs/docs/usage/mqtt.md → docs/docs/integrations/mqtt.md
View File

10
docs/docs/usage/web.md
View File

@ -1,10 +0,0 @@
---
id: web
title: Web Interface
---
Frigate comes bundled with a simple web ui that supports the following:
- Show cameras
- Browse events
- Mask helper

9129
docs/package-lock.json generated
View File

File diff suppressed because it is too large Load Diff

4
docs/package.json
View File

@ -12,8 +12,8 @@
"clear": "docusaurus clear" "clear": "docusaurus clear"
}, },
"dependencies": { "dependencies": {
"@docusaurus/core": "2.0.0-alpha.70", "@docusaurus/core": "^2.0.0-beta.ff31de0ff",
"@docusaurus/preset-classic": "2.0.0-alpha.70", "@docusaurus/preset-classic": "^2.0.0-beta.ff31de0ff",
"@mdx-js/react": "^1.6.21", "@mdx-js/react": "^1.6.21",
"clsx": "^1.1.1", "clsx": "^1.1.1",
"raw-loader": "^4.0.2", "raw-loader": "^4.0.2",

26
docs/sidebars.js
View File

@ -1,16 +1,32 @@
module.exports = { module.exports = {
docs: { docs: {
Frigate: ['index', 'how-it-works', 'hardware', 'installation', 'troubleshooting'], Frigate: [
'index',
'hardware',
'installation',
],
Guides: [
'guides/camera_setup',
'guides/getting_started',
'guides/false_positives',
],
Configuration: [ Configuration: [
'configuration/index', 'configuration/index',
'configuration/cameras',
'configuration/optimizing',
'configuration/detectors', 'configuration/detectors',
'configuration/false_positives', 'configuration/cameras',
'configuration/masks',
'configuration/record',
'configuration/snapshots',
'configuration/objects', 'configuration/objects',
'configuration/rtmp',
'configuration/zones',
'configuration/advanced', 'configuration/advanced',
'configuration/hardware_acceleration',
'configuration/nvdec',
'configuration/camera_specific',
], ],
Usage: ['usage/home-assistant', 'usage/web', 'usage/api', 'usage/mqtt'], Integrations: ['integrations/home-assistant', 'integrations/api', 'integrations/mqtt'],
Troubleshooting: ['faqs'],
Development: ['contributing'], Development: ['contributing'],
}, },
}; };

BIN
docs/static/img/resolutions.png vendored Normal file
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 65 KiB

78
web/package-lock.json generated
View File

@ -4137,17 +4137,17 @@
"dev": true "dev": true
}, },
"@videojs/http-streaming": { "@videojs/http-streaming": {
"version": "2.9.0", "version": "2.10.2",
"resolved": "https://registry.npmjs.org/@videojs/http-streaming/-/http-streaming-2.9.0.tgz", "resolved": "https://registry.npmjs.org/@videojs/http-streaming/-/http-streaming-2.10.2.tgz",
"integrity": "sha512-fRooepCcSYUKcplrn4h/teqL08Nr5bo4KDs8uGI6RAYOuDhGfWjaxFpmdUhr6Yme9G+ci+2Hh/hk9hHXxYGWaw==", "integrity": "sha512-JTAlAUHzj0sTsge2WBh4DWKM2I5BDFEZYOvzxmsK/ySILmI0GRyjAHx9uid68ZECQ2qbEAIRmZW5lWp0R5PeNA==",
"requires": { "requires": {
"@babel/runtime": "^7.12.5", "@babel/runtime": "^7.12.5",
"@videojs/vhs-utils": "^3.0.2", "@videojs/vhs-utils": "3.0.3",
"aes-decrypter": "3.1.2", "aes-decrypter": "3.1.2",
"global": "^4.4.0", "global": "^4.4.0",
"m3u8-parser": "4.7.0", "m3u8-parser": "4.7.0",
"mpd-parser": "0.17.0", "mpd-parser": "0.19.0",
"mux.js": "5.11.0", "mux.js": "5.13.0",
"video.js": "^6 || ^7" "video.js": "^6 || ^7"
}, },
"dependencies": { "dependencies": {
@ -4163,9 +4163,9 @@
} }
}, },
"@videojs/vhs-utils": { "@videojs/vhs-utils": {
"version": "3.0.2", "version": "3.0.3",
"resolved": "https://registry.npmjs.org/@videojs/vhs-utils/-/vhs-utils-3.0.2.tgz", "resolved": "https://registry.npmjs.org/@videojs/vhs-utils/-/vhs-utils-3.0.3.tgz",
"integrity": "sha512-r8Yas1/tNGsGRNoIaDJuiWiQgM0P2yaEnobgzw5JcBiEqxnS8EXoUm4QtKH7nJtnppZ1yqBx1agBZCvBMKXA2w==", "integrity": "sha512-bU7daxDHhzcTDbmty1cXjzsTYvx2cBGbA8hG5H2Gvpuk4sdfuvkZtMCwtCqL59p6dsleMPspyaNS+7tWXx2Y0A==",
"requires": { "requires": {
"@babel/runtime": "^7.12.5", "@babel/runtime": "^7.12.5",
"global": "^4.4.0", "global": "^4.4.0",
@ -4184,9 +4184,9 @@
} }
}, },
"@videojs/xhr": { "@videojs/xhr": {
"version": "2.5.1", "version": "2.6.0",
"resolved": "https://registry.npmjs.org/@videojs/xhr/-/xhr-2.5.1.tgz", "resolved": "https://registry.npmjs.org/@videojs/xhr/-/xhr-2.6.0.tgz",
"integrity": "sha512-wV9nGESHseSK+S9ePEru2+OJZ1jq/ZbbzniGQ4weAmTIepuBMSYPx5zrxxQA0E786T5ykpO8ts+LayV+3/oI2w==", "integrity": "sha512-7J361GiN1tXpm+gd0xz2QWr3xNWBE+rytvo8J3KuggFaLg+U37gZQ2BuPLcnkfGffy2e+ozY70RHC8jt7zjA6Q==",
"requires": { "requires": {
"@babel/runtime": "^7.5.5", "@babel/runtime": "^7.5.5",
"global": "~4.4.0", "global": "~4.4.0",
@ -4204,6 +4204,11 @@
} }
} }
}, },
"@xmldom/xmldom": {
"version": "0.7.4",
"resolved": "https://registry.npmjs.org/@xmldom/xmldom/-/xmldom-0.7.4.tgz",
"integrity": "sha512-wdxC79cvO7PjSM34jATd/RYZuYWQ8y/R7MidZl1NYYlbpFn1+spfjkiR3ZsJfcaTs2IyslBN7VwBBJwrYKM+zw=="
},
"abab": { "abab": {
"version": "2.0.5", "version": "2.0.5",
"resolved": "https://registry.npmjs.org/abab/-/abab-2.0.5.tgz", "resolved": "https://registry.npmjs.org/abab/-/abab-2.0.5.tgz",
@ -9115,14 +9120,14 @@
"dev": true "dev": true
}, },
"mpd-parser": { "mpd-parser": {
"version": "0.17.0", "version": "0.19.0",
"resolved": "https://registry.npmjs.org/mpd-parser/-/mpd-parser-0.17.0.tgz", "resolved": "https://registry.npmjs.org/mpd-parser/-/mpd-parser-0.19.0.tgz",
"integrity": "sha512-oKS5G0jCcHHJ3sHYlcLeM9Xcbuixl08eAx7QW0Th7ChlZiI0YvLtGaHE/L0aKUBJFNvtkeksIr8XgJgSBBsS4g==", "integrity": "sha512-FDLIXtZMZs99fv5iXNFg94quNFT26tobo0NUgHu7L3XgZvEq1NBarf5yxDFFJ1zzfbcmtj+NRaml6nYIxoPWvw==",
"requires": { "requires": {
"@babel/runtime": "^7.12.5", "@babel/runtime": "^7.12.5",
"@videojs/vhs-utils": "^3.0.2", "@videojs/vhs-utils": "^3.0.2",
"global": "^4.4.0", "@xmldom/xmldom": "^0.7.2",
"xmldom": "^0.5.0" "global": "^4.4.0"
}, },
"dependencies": { "dependencies": {
"global": { "global": {
@ -9156,9 +9161,9 @@
} }
}, },
"mux.js": { "mux.js": {
"version": "5.11.0", "version": "5.13.0",
"resolved": "https://registry.npmjs.org/mux.js/-/mux.js-5.11.0.tgz", "resolved": "https://registry.npmjs.org/mux.js/-/mux.js-5.13.0.tgz",
"integrity": "sha512-Q/iLfohHh5Pp6lW7EFtcxNuaCNJ3Ruywfy46pWLsY+yIxR1kXXImYY1wOhg8jLdBMs1kRaZqsiB4Zncsiw0a2Q==", "integrity": "sha512-PkmnzHcTQjUBEHp3KRPQAFoNkJtKlpCEvsYtXDfDrC+/WqbMuxHvoYfmAbHVAH7Sa/KliPVU0dT1ureO8wilog==",
"requires": { "requires": {
"@babel/runtime": "^7.11.2" "@babel/runtime": "^7.11.2"
} }
@ -9565,9 +9570,9 @@
"dev": true "dev": true
}, },
"path-parse": { "path-parse": {
"version": "1.0.6", "version": "1.0.7",
"resolved": "https://registry.npmjs.org/path-parse/-/path-parse-1.0.6.tgz", "resolved": "https://registry.npmjs.org/path-parse/-/path-parse-1.0.7.tgz",
"integrity": "sha512-GSmOT2EbHrINBf9SR7CDELwlJ8AENk3Qn7OikK4nFYAu3Ote2+JYNVvkpAEQm3/TLNEJFD/xZJjzyxg3KBWOzw==", "integrity": "sha512-LDJzPVEEEPR+y48z93A0Ed0yXb8pAByGWo/k5YYdYgpY2/2EsOsksJrq7lOHxryrVOn1ejG6oAp8ahvOIQD8sw==",
"dev": true "dev": true
}, },
"path-type": { "path-type": {
@ -11808,9 +11813,9 @@
"dev": true "dev": true
}, },
"url-toolkit": { "url-toolkit": {
"version": "2.2.2", "version": "2.2.3",
"resolved": "https://registry.npmjs.org/url-toolkit/-/url-toolkit-2.2.2.tgz", "resolved": "https://registry.npmjs.org/url-toolkit/-/url-toolkit-2.2.3.tgz",
"integrity": "sha512-l25w6Sy+Iy3/IbogunxhWwljPaDnqpiKvrQRoLBm6DfISco7NyRIS7Zf6+Oxhy1T8kHxWdwLND7ZZba6NjXMug==" "integrity": "sha512-Da75SQoxsZ+2wXS56CZBrj2nukQ4nlGUZUP/dqUBG5E1su5GKThgT94Q00x81eVII7AyS1Pn+CtTTZ4Z0pLUtQ=="
}, },
"use": { "use": {
"version": "3.1.1", "version": "3.1.1",
@ -11887,20 +11892,20 @@
} }
}, },
"video.js": { "video.js": {
"version": "7.13.0", "version": "7.15.4",
"resolved": "https://registry.npmjs.org/video.js/-/video.js-7.13.0.tgz", "resolved": "https://registry.npmjs.org/video.js/-/video.js-7.15.4.tgz",
"integrity": "sha512-wJcB2R5q3/6Ez5XUfpZBZTdgF321rX/M1HkDKxXQIdfsVi/pfP4l+equ2xL9O3X0XAPHRxLEegraIEuX28mRkA==", "integrity": "sha512-hghxkgptLUvfkpktB4wxcIVF3VpY/hVsMkrjHSv0jpj1bW9Jplzdt8IgpTm9YhlB1KYAp07syVQeZcBFUBwhkw==",
"requires": { "requires": {
"@babel/runtime": "^7.12.5", "@babel/runtime": "^7.12.5",
"@videojs/http-streaming": "2.9.0", "@videojs/http-streaming": "2.10.2",
"@videojs/vhs-utils": "^3.0.2", "@videojs/vhs-utils": "^3.0.3",
"@videojs/xhr": "2.5.1", "@videojs/xhr": "2.6.0",
"aes-decrypter": "3.1.2", "aes-decrypter": "3.1.2",
"global": "^4.4.0", "global": "^4.4.0",
"keycode": "^2.2.0", "keycode": "^2.2.0",
"m3u8-parser": "4.7.0", "m3u8-parser": "4.7.0",
"mpd-parser": "0.17.0", "mpd-parser": "0.19.0",
"mux.js": "5.11.0", "mux.js": "5.13.0",
"safe-json-parse": "4.0.0", "safe-json-parse": "4.0.0",
"videojs-font": "3.2.0", "videojs-font": "3.2.0",
"videojs-vtt.js": "^0.15.3" "videojs-vtt.js": "^0.15.3"
@ -12112,11 +12117,6 @@
"integrity": "sha512-JZnDKK8B0RCDw84FNdDAIpZK+JuJw+s7Lz8nksI7SIuU3UXJJslUthsi+uWBUYOwPFwW7W7PRLRfUKpxjtjFCw==", "integrity": "sha512-JZnDKK8B0RCDw84FNdDAIpZK+JuJw+s7Lz8nksI7SIuU3UXJJslUthsi+uWBUYOwPFwW7W7PRLRfUKpxjtjFCw==",
"dev": true "dev": true
}, },
"xmldom": {
"version": "0.5.0",
"resolved": "https://registry.npmjs.org/xmldom/-/xmldom-0.5.0.tgz",
"integrity": "sha512-Foaj5FXVzgn7xFzsKeNIde9g6aFBxTPi37iwsno8QvApmtg7KYrr+OPyRHcJF7dud2a5nGRBXK3n0dL62Gf7PA=="
},
"xtend": { "xtend": {
"version": "4.0.2", "version": "4.0.2",
"resolved": "https://registry.npmjs.org/xtend/-/xtend-4.0.2.tgz", "resolved": "https://registry.npmjs.org/xtend/-/xtend-4.0.2.tgz",

2
web/package.json
View File

@ -18,7 +18,7 @@
"preact": "^10.5.9", "preact": "^10.5.9",
"preact-async-route": "^2.2.1", "preact-async-route": "^2.2.1",
"preact-router": "^3.2.1", "preact-router": "^3.2.1",
"video.js": "^7.13.0", "video.js": "^7.15.4",
"videojs-playlist": "^4.3.1", "videojs-playlist": "^4.3.1",
"videojs-seek-buttons": "^2.0.1" "videojs-seek-buttons": "^2.0.1"
}, },