Docs: correct go2rtc version used (#14753)

docs/docs/configuration/camera_specific.md

@@ -181,7 +181,7 @@ go2rtc:
       - rtspx://192.168.1.1:7441/abcdefghijk
 ```
 
-[See the go2rtc docs for more information](https://github.com/AlexxIT/go2rtc/tree/v1.9.4#source-rtsp)
+[See the go2rtc docs for more information](https://github.com/AlexxIT/go2rtc/tree/v1.9.2#source-rtsp)
 
 In the Unifi 2.0 update Unifi Protect Cameras had a change in audio sample rate which causes issues for ffmpeg. The input rate needs to be set for record if used directly with unifi protect.
 

docs/docs/configuration/restream.md

@@ -7,7 +7,7 @@ title: Restream
 
 Frigate can restream your video feed as an RTSP feed for other applications such as Home Assistant to utilize it at `rtsp://<frigate_host>:8554/<camera_name>`. Port 8554 must be open. [This allows you to use a video feed for detection in Frigate and Home Assistant live view at the same time without having to make two separate connections to the camera](#reduce-connections-to-camera). The video feed is copied from the original video feed directly to avoid re-encoding. This feed does not include any annotation by Frigate.
 
-Frigate uses [go2rtc](https://github.com/AlexxIT/go2rtc/tree/v1.9.4) to provide its restream and MSE/WebRTC capabilities. The go2rtc config is hosted at the `go2rtc` in the config, see [go2rtc docs](https://github.com/AlexxIT/go2rtc/tree/v1.9.4#configuration) for more advanced configurations and features.
+Frigate uses [go2rtc](https://github.com/AlexxIT/go2rtc/tree/v1.9.2) to provide its restream and MSE/WebRTC capabilities. The go2rtc config is hosted at the `go2rtc` in the config, see [go2rtc docs](https://github.com/AlexxIT/go2rtc/tree/v1.9.2#configuration) for more advanced configurations and features.
 
 :::note
 
@@ -134,7 +134,7 @@ cameras:
 
 ## Advanced Restream Configurations
 
-The [exec](https://github.com/AlexxIT/go2rtc/tree/v1.9.4#source-exec) source in go2rtc can be used for custom ffmpeg commands. An example is below:
+The [exec](https://github.com/AlexxIT/go2rtc/tree/v1.9.2#source-exec) source in go2rtc can be used for custom ffmpeg commands. An example is below:
 
 NOTE: The output will need to be passed with two curly braces `{{output}}`
 

docs/docs/guides/configuring_go2rtc.md

@@ -13,7 +13,7 @@ Use of the bundled go2rtc is optional. You can still configure FFmpeg to connect
 
 # Setup a go2rtc stream
 
-First, you will want to configure go2rtc to connect to your camera stream by adding the stream you want to use for live view in your Frigate config file. Avoid changing any other parts of your config at this step. Note that go2rtc supports [many different stream types](https://github.com/AlexxIT/go2rtc/tree/v1.9.4#module-streams), not just rtsp.
+First, you will want to configure go2rtc to connect to your camera stream by adding the stream you want to use for live view in your Frigate config file. Avoid changing any other parts of your config at this step. Note that go2rtc supports [many different stream types](https://github.com/AlexxIT/go2rtc/tree/v1.9.2#module-streams), not just rtsp.
 
 :::tip
 
@@ -47,8 +47,8 @@ After adding this to the config, restart Frigate and try to watch the live strea
 
 - Check Video Codec:
     - If the camera stream works in go2rtc but not in your browser, the video codec might be unsupported.
-    - If using H265, switch to H264. Refer to [video codec compatibility](https://github.com/AlexxIT/go2rtc/tree/v1.9.4#codecs-madness) in go2rtc documentation.
-    - If unable to switch from H265 to H264, or if the stream format is different (e.g., MJPEG), re-encode the video using [FFmpeg parameters](https://github.com/AlexxIT/go2rtc/tree/v1.9.4#source-ffmpeg). It supports rotating and resizing video feeds and hardware acceleration. Keep in mind that transcoding video from one format to another is a resource intensive task and you may be better off using the built-in jsmpeg view.
+    - If using H265, switch to H264. Refer to [video codec compatibility](https://github.com/AlexxIT/go2rtc/tree/v1.9.2#codecs-madness) in go2rtc documentation.
+    - If unable to switch from H265 to H264, or if the stream format is different (e.g., MJPEG), re-encode the video using [FFmpeg parameters](https://github.com/AlexxIT/go2rtc/tree/v1.9.2#source-ffmpeg). It supports rotating and resizing video feeds and hardware acceleration. Keep in mind that transcoding video from one format to another is a resource intensive task and you may be better off using the built-in jsmpeg view.
         ```yaml
         go2rtc:
           streams:

docs/sidebars.ts

@@ -26,7 +26,7 @@ const sidebars: SidebarsConfig = {
         {
           type: 'link',
           label: 'Go2RTC Configuration Reference',
-          href: 'https://github.com/AlexxIT/go2rtc/tree/v1.9.4#configuration',
+          href: 'https://github.com/AlexxIT/go2rtc/tree/v1.9.2#configuration',
         } as PropSidebarItemLink,
       ],
       Detectors: [