mirror of
https://github.com/blakeblackshear/frigate.git
synced 2024-11-21 19:07:46 +01:00
Update docs deps (#10591)
* remove deprecated caution in facor of warning * Update last dep
This commit is contained in:
Nicolas Mowen
GitHub
parent
0ac7aaabe3
commit
e5595ebb2f
@ -96,7 +96,7 @@ model:
|
||||
|
||||
Note that if you rename objects in the labelmap, you will also need to update your `objects -> track` list as well.
|
||||
|
||||
:::caution
|
||||
:::warning
|
||||
|
||||
Some labels have special handling and modifications can disable functionality.
|
||||
|
||||
|
||||
@ -104,7 +104,7 @@ According to [this discussion](https://github.com/blakeblackshear/frigate/issues
|
||||
Cameras connected via a Reolink NVR can be connected with the http stream, use `channel[0..15]` in the stream url for the additional channels.
|
||||
The setup of main stream can be also done via RTSP, but isn't always reliable on all hardware versions. The example configuration is working with the oldest HW version RLN16-410 device with multiple types of cameras.
|
||||
|
||||
:::caution
|
||||
:::warning
|
||||
|
||||
The below configuration only works for reolink cameras with stream resolution of 5MP or lower, 8MP+ cameras need to use RTSP as http-flv is not supported in this case.
|
||||
|
||||
|
||||
@ -12,7 +12,7 @@ A camera is enabled by default but can be temporarily disabled by using `enabled
|
||||
Each role can only be assigned to one input per camera. The options for roles are as follows:
|
||||
|
||||
| Role | Description |
|
||||
| -------- | ---------------------------------------------------------------------------------------- |
|
||||
| -------- | ----------------------------------------------------------------------------------- |
|
||||
| `detect` | Main feed for object detection. [docs](object_detectors.md) |
|
||||
| `record` | Saves segments of the video feed based on configuration settings. [docs](record.md) |
|
||||
| `audio` | Feed for audio based detection. [docs](audio_detectors.md) |
|
||||
@ -50,7 +50,7 @@ For camera model specific settings check the [camera specific](camera_specific.m
|
||||
|
||||
## Setting up camera PTZ controls
|
||||
|
||||
:::caution
|
||||
:::warning
|
||||
|
||||
Not every PTZ supports ONVIF, which is the standard protocol Frigate uses to communicate with your camera. Check the [official list of ONVIF conformant products](https://www.onvif.org/conformant-products/), your camera documentation, or camera manufacturer's website to ensure your PTZ supports ONVIF. Also, ensure your camera is running the latest firmware.
|
||||
|
||||
|
||||
@ -21,8 +21,8 @@ See [the hwaccel docs](/configuration/hardware_acceleration.md) for more info on
|
||||
| preset-nvidia | Nvidia GPU | |
|
||||
| preset-jetson-h264 | Nvidia Jetson with h264 stream | |
|
||||
| preset-jetson-h265 | Nvidia Jetson with h265 stream | |
|
||||
| preset-rk-h264 | Rockchip MPP with h264 stream | Use image with *-rk suffix and privileged mode |
|
||||
| preset-rk-h265 | Rockchip MPP with h265 stream | Use image with *-rk suffix and privileged mode |
|
||||
| preset-rk-h264 | Rockchip MPP with h264 stream | Use image with \*-rk suffix and privileged mode |
|
||||
| preset-rk-h265 | Rockchip MPP with h265 stream | Use image with \*-rk suffix and privileged mode |
|
||||
|
||||
### Input Args Presets
|
||||
|
||||
@ -42,7 +42,7 @@ See [the camera specific docs](/configuration/camera_specific.md) for more info
|
||||
| preset-rtsp-udp | RTSP Stream via UDP | Use when camera is UDP only |
|
||||
| preset-rtsp-blue-iris | Blue Iris RTSP Stream | Use when consuming a stream from Blue Iris |
|
||||
|
||||
:::caution
|
||||
:::warning
|
||||
|
||||
It is important to be mindful of input args when using restream because you can have a mix of protocols. `http` and `rtmp` presets cannot be used with `rtsp` streams. For example, when using a reolink cam with the rtsp restream as a source for record the preset-http-reolink will cause a crash. In this case presets will need to be set at the stream level. See the example below.
|
||||
|
||||
@ -72,7 +72,7 @@ cameras:
|
||||
Output args presets help make the config more readable and handle use cases for different types of streams to ensure consistent recordings.
|
||||
|
||||
| Preset | Usage | Other Notes |
|
||||
| -------------------------------- | --------------------------------- | --------------------------------------------- |
|
||||
| -------------------------------- | --------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------ |
|
||||
| preset-record-generic | Record WITHOUT audio | This is the default when nothing is specified |
|
||||
| preset-record-generic-audio-copy | Record WITH original audio | Use this to enable audio in recordings |
|
||||
| preset-record-generic-audio-aac | Record WITH transcoded aac audio | Use this to transcode to aac audio. If your source is already aac, use preset-record-generic-audio-copy instead to avoid re-encoding |
|
||||
|
||||
@ -5,7 +5,7 @@ title: Full Reference Config
|
||||
|
||||
### Full configuration reference:
|
||||
|
||||
:::caution
|
||||
:::warning
|
||||
|
||||
It is not recommended to copy this full configuration file. Only specify values that are different from the defaults. Configuration options and default values may change in future versions.
|
||||
|
||||
|
||||
@ -47,7 +47,7 @@ services:
|
||||
...
|
||||
```
|
||||
|
||||
:::caution
|
||||
:::warning
|
||||
|
||||
Users of the Snapcraft build of Docker cannot use storage locations outside your $HOME folder.
|
||||
|
||||
@ -158,7 +158,7 @@ The community supported docker image tags for the current stable version are:
|
||||
|
||||
## Home Assistant Addon
|
||||
|
||||
:::caution
|
||||
:::warning
|
||||
|
||||
As of HomeAssistant OS 10.2 and Core 2023.6 defining separate network storage for media is supported.
|
||||
|
||||
|
||||
@ -74,7 +74,7 @@ go2rtc:
|
||||
- "ffmpeg:rtsp://user:password@10.0.10.10:554/cam/realmonitor?channel=1&subtype=2#video=copy#audio=copy#audio=aac"
|
||||
```
|
||||
|
||||
:::caution
|
||||
:::warning
|
||||
|
||||
To access the go2rtc stream externally when utilizing the Frigate Add-On (for instance through VLC), you must first enable the RTSP Restream port. You can do this by visiting the Frigate Add-On configuration page within Home Assistant and revealing the hidden options under the "Show disabled ports" section.
|
||||
|
||||
|
||||
@ -245,7 +245,7 @@ Now that you have optimized your configuration for decoding the video stream, yo
|
||||
|
||||
Now that you know where you need to mask, use the "Mask & Zone creator" in the options pane to generate the coordinates needed for your config file. More information about masks can be found [here](../configuration/masks.md).
|
||||
|
||||
:::caution
|
||||
:::warning
|
||||
|
||||
Note that motion masks should not be used to mark out areas where you do not want objects to be detected or to reduce false positives. They do not alter the image sent to object detection, so you can still get events and detections in areas with motion masks. These only prevent motion in these areas from initiating object detection.
|
||||
|
||||
|
||||
@ -11,7 +11,7 @@ This is an area targeted for improvement in future releases.
|
||||
|
||||
Many people use Frigate to detect cars entering their driveway, and they often run into an issue with repeated events of parked cars and/or long running events after the car parks. This can cause Frigate to store more video than desired.
|
||||
|
||||
:::caution
|
||||
:::warning
|
||||
|
||||
It is not recommended to use motion masks to try and eliminate parked cars in your driveway. Motion masks are designed to prevent motion from triggering object detection and will not prevent objects from being detected in the area if motion is detected outside of the motion mask.
|
||||
|
||||
|
||||
@ -13,7 +13,7 @@ The suggested steps are:
|
||||
- **Encrypt** content from the proxy webserver by installing SSL (such as with [Let's Encrypt](https://letsencrypt.org/)). Note that SSL is then not required on your Frigate webserver as the proxy encrypts all requests for you
|
||||
- **Restrict** access to your Frigate instance at the proxy using, for example, password authentication
|
||||
|
||||
:::caution
|
||||
:::warning
|
||||
A reverse proxy can be used to secure access to an internal webserver but the user will be entirely reliant
|
||||
on the steps they have taken. You must ensure you are following security best practices.
|
||||
This page does not attempt to outline the specific steps needed to secure your internal website.
|
||||
@ -122,7 +122,6 @@ This section points to your SSL files, the example below shows locations to a de
|
||||
ssl_certificate_key /etc/letsencrypt/live/npm-1/privkey.pem;
|
||||
```
|
||||
|
||||
|
||||
### Setup reverse proxy settings
|
||||
|
||||
The settings below enabled connection upgrade, sets up logging (optional) and proxies everything from the `/` context to the docker host and port specified earlier in the configuration
|
||||
|
||||
@ -117,15 +117,15 @@ Sample response:
|
||||
"cmdline": "ffmpeg...",
|
||||
"cpu": "5.0",
|
||||
"cpu_average": "3.0",
|
||||
"mem": "0.5",
|
||||
"mem": "0.5"
|
||||
}
|
||||
},
|
||||
"gpu_usages": {
|
||||
"gpu-type": {
|
||||
"gpu": "17%",
|
||||
"mem": "18%",
|
||||
},
|
||||
},
|
||||
"mem": "18%"
|
||||
}
|
||||
}
|
||||
}
|
||||
```
|
||||
|
||||
@ -278,7 +278,7 @@ Sub labels must be 100 characters or shorter.
|
||||
```json
|
||||
{
|
||||
"subLabel": "some_string",
|
||||
"subLabelScore": 0.79,
|
||||
"subLabelScore": 0.79
|
||||
}
|
||||
```
|
||||
|
||||
@ -317,7 +317,7 @@ Accepts the following query string parameters, but they are only applied when an
|
||||
|
||||
Create a manual event with a given `label` (ex: doorbell press) to capture a specific event besides an object being detected.
|
||||
|
||||
:::caution
|
||||
:::warning
|
||||
|
||||
Recording retention config still applies to manual events, if frigate is configured with `mode: motion` then the manual event will only keep recording segments when motion occurred.
|
||||
|
||||
@ -409,7 +409,7 @@ It is also possible to export this recording as a time-lapse.
|
||||
|
||||
```json
|
||||
{
|
||||
"playback": "realtime", // playback factor: realtime or timelapse_25x
|
||||
"playback": "realtime" // playback factor: realtime or timelapse_25x
|
||||
}
|
||||
```
|
||||
|
||||
@ -445,7 +445,7 @@ Returns the snapshot image from the specific point in that cameras recordings.
|
||||
Reviews from the database. Accepts the following query string parameters:
|
||||
|
||||
| param | Type | Description |
|
||||
| -------------------- | ----- | ---------------------------------------------------------------------- |
|
||||
| ---------- | ---- | -------------------------------------------------------------- |
|
||||
| `before` | int | Epoch time |
|
||||
| `after` | int | Epoch time |
|
||||
| `cameras` | str | , separated list of cameras |
|
||||
@ -459,7 +459,7 @@ Reviews from the database. Accepts the following query string parameters:
|
||||
Summary of reviews for the last 30 days. Accepts the following query string parameters:
|
||||
|
||||
| param | Type | Description |
|
||||
| -------------------- | ----- | ---------------------------------------------------------------------- |
|
||||
| ---------- | ---- | --------------------------- |
|
||||
| `cameras` | str | , separated list of cameras |
|
||||
| `labels` | str | , separated list of labels |
|
||||
| `timezone` | str | Timezone name |
|
||||
|
||||
@ -21,7 +21,7 @@ Once logged in, you can generate an API key for Frigate in Settings.
|
||||
|
||||
In Frigate, you can use an environment variable or a docker secret named `PLUS_API_KEY` to enable the `SEND TO FRIGATE+` buttons on the events page. Home Assistant Addon users can set it under Settings > Addons > Frigate NVR > Configuration > Options (be sure to toggle the "Show unused optional configuration options" switch).
|
||||
|
||||
:::caution
|
||||
:::warning
|
||||
|
||||
You cannot use the `environment_vars` section of your configuration file to set this environment variable.
|
||||
|
||||
|
||||
@ -6,7 +6,7 @@ title: Third Party Extensions
|
||||
Being open source, others have the possibility to modify and extend the rich functionality Frigate already offers.
|
||||
This page is meant to be an overview over additions one can make to the home NVR setup. The list is not exhaustive and can be extended via PR to the Frigate docs.
|
||||
|
||||
:::caution
|
||||
:::warning
|
||||
|
||||
This page does not recommend or rate the presented projects.
|
||||
Please use your own knowledge to assess and vet them before you install anything on your system.
|
||||
|
||||
14
docs/package-lock.json
generated
14
docs/package-lock.json
generated
@ -8,9 +8,9 @@
|
||||
"name": "docs",
|
||||
"version": "0.0.0",
|
||||
"dependencies": {
|
||||
"@docusaurus/core": "^3.0.0",
|
||||
"@docusaurus/preset-classic": "^3.0.0",
|
||||
"@docusaurus/theme-mermaid": "^3.0.0",
|
||||
"@docusaurus/core": "^3.1.1",
|
||||
"@docusaurus/preset-classic": "^3.1.1",
|
||||
"@docusaurus/theme-mermaid": "^3.1.1",
|
||||
"@mdx-js/react": "^3.0.0",
|
||||
"clsx": "^2.0.0",
|
||||
"prism-react-renderer": "^2.1.0",
|
||||
@ -21,7 +21,7 @@
|
||||
"devDependencies": {
|
||||
"@docusaurus/module-type-aliases": "^3.0.0",
|
||||
"@docusaurus/types": "^3.0.0",
|
||||
"@types/react": "^18.2.29"
|
||||
"@types/react": "^18.2.67"
|
||||
},
|
||||
"engines": {
|
||||
"node": ">=18.0"
|
||||
@ -3599,9 +3599,9 @@
|
||||
"integrity": "sha512-hKormJbkJqzQGhziax5PItDUTMAM9uE2XXQmM37dyd4hVM+5aVl7oVxMVUiVQn2oCQFN/LKCZdvSM0pFRqbSmQ=="
|
||||
},
|
||||
"node_modules/@types/react": {
|
||||
"version": "18.2.63",
|
||||
"resolved": "https://registry.npmjs.org/@types/react/-/react-18.2.63.tgz",
|
||||
"integrity": "sha512-ppaqODhs15PYL2nGUOaOu2RSCCB4Difu4UFrP4I3NHLloXC/ESQzQMi9nvjfT1+rudd0d2L3fQPJxRSey+rGlQ==",
|
||||
"version": "18.2.67",
|
||||
"resolved": "https://registry.npmjs.org/@types/react/-/react-18.2.67.tgz",
|
||||
"integrity": "sha512-vkIE2vTIMHQ/xL0rgmuoECBCkZFZeHr49HeWSc24AptMbNRo7pwSBvj73rlJJs9fGKj0koS+V7kQB1jHS0uCgw==",
|
||||
"dependencies": {
|
||||
"@types/prop-types": "*",
|
||||
"@types/scheduler": "*",
|
||||
|
||||
@ -14,9 +14,9 @@
|
||||
"write-heading-ids": "docusaurus write-heading-ids"
|
||||
},
|
||||
"dependencies": {
|
||||
"@docusaurus/core": "^3.0.0",
|
||||
"@docusaurus/preset-classic": "^3.0.0",
|
||||
"@docusaurus/theme-mermaid": "^3.0.0",
|
||||
"@docusaurus/core": "^3.1.1",
|
||||
"@docusaurus/preset-classic": "^3.1.1",
|
||||
"@docusaurus/theme-mermaid": "^3.1.1",
|
||||
"@mdx-js/react": "^3.0.0",
|
||||
"clsx": "^2.0.0",
|
||||
"prism-react-renderer": "^2.1.0",
|
||||
@ -39,7 +39,7 @@
|
||||
"devDependencies": {
|
||||
"@docusaurus/module-type-aliases": "^3.0.0",
|
||||
"@docusaurus/types": "^3.0.0",
|
||||
"@types/react": "^18.2.29"
|
||||
"@types/react": "^18.2.67"
|
||||
},
|
||||
"engines": {
|
||||
"node": ">=18.0"
|
||||
|
||||
Loading…
Reference in New Issue
Block a user