* optimize frame-per-second calculations
FPS is never calculated over differing periods for even given
counter. By only storing timestamps within the period that is
used, we avoid having to iterate 1000 entries every time it's
re-calculated (multiple times per second). 1000 entries would
normally only be needed if something is running at 100fps. A
more common speed - anywhere from 5 to 30fps, only needs 50
to 300 entries.
This isn't a huge improvement in the grand scheme, but when motion
detection is disabled, it takes nearly as much time in a flamegraph
as actually transferring the video frame.
* fix python checks
* Make camera recordings mover asynchronous
* Formatting
* Move to using cv2 instead of external ffmpeg process
* Use ffprobe if cv2 failed
* Formatting
* Fix bad access
* Formatting
* Update frigate/record/maintainer.py
Co-authored-by: Blake Blackshear <blakeb@blakeshome.com>
* Update name of caller
---------
Co-authored-by: Blake Blackshear <blakeb@blakeshome.com>
* Add function to get physical interfaces for bandwidth calculation in get_bandwidth_stats() function
* Add telemetry configuration option for enabled network interfaces, with default values for monitoring bandwidth stats for camera ffmpeg processes, go2rtc, and object detectors. Also add support for FrigateConfig in set_bandwidth_stats function to get bandwidth stats for specified network interfaces
* Add isort and ruff linter
Both linters are pretty common among modern python code bases.
The isort tool provides stable sorting and grouping, as well as pruning
of unused imports.
Ruff is a modern linter, that is very fast due to being written in rust.
It can detect many common issues in a python codebase.
Removes the pylint dev requirement, since ruff replaces it.
* treewide: fix issues detected by ruff
* treewide: fix bare except clauses
* .devcontainer: Set up isort
* treewide: optimize imports
* treewide: apply black
* treewide: make regex patterns raw strings
This is necessary for escape sequences to be properly recognized.
* Add network bandwidth usage to System table display in System.jsx and update get_bandwidth_stats function in util.py to include go2rtc processes
* black...
* Add network bandwidth usage to system table in web UI and improve regex in get_bandwidth_stats function to include frigate detector processes
* black...
* Update bandwidth calculation to include both incoming and outgoing traffic
* black:(
* nvml
* black...black...black...
* small fix for avoid errors on strange GPUs and old drivers
* fix type errors
* fix type errors
* fix unittest process crash
where the tests for tests?..
* it's impossible to mock low-level library
* fix double % for other GPU types
* remove space before gpu statistic values
* test refactor process stats
* Update util.py
* bugfix
* black formatting
* add missing processes field to StatsTrackingTypes class
* fix python checks and tests...
* use psutil for calcilate cpu utilization on get_cpu_stats
* black...black...black...
* add cpu average
* calculate statiscts for logger process
* add P-ID for other processes in System.jsx
* Apply suggestions from code review
Co-authored-by: Nicolas Mowen <nickmowen213@gmail.com>
* make page beautiful again :)
---------
Co-authored-by: Nicolas Mowen <nickmowen213@gmail.com>
* avoid executing external tools by using Python's built-in os module to interact with the filesystem directly
* Refactor recording cleanup script to use os module instead of subprocess
* black format util.py
* Ooooops
* Refactor get_cpu_stats() to properly identify recording process
* Add ability to GPU device to be automatically detected when multiple exist
* Add logging info
* Fix access
* Fix
* Formatting
* Fix path of device
* Use log error instead of raise
* Remove log which could apply to other caess
* Set default value
* rework logic and support auto gpu selection for encoding gpu as well
* Refator s6 scripts to the new format
* Remove unneeded workaround
* Migrate logging to new s6 format
* Remove more unnecessary s6 variables
* Fix prepare-log and when go2rtc is not present in config
* Restart the whole container if either Frigate or go2rtc fails
* D
* Fix service name in finish
* Fix nginx finish comment
* Restart improvements
* Fix devcontainer
* Fix format
* Update Dockerfile
Co-authored-by: Felipe Santos <felipecassiors@gmail.com>
Co-authored-by: Nicolas Mowen <nickmowen213@gmail.com>
* Add missing labels to default labelmap. Fill any holes with "unknown". Remove unique labelmap for tensorrt.
* Replace "truck" with "car" on Openvino labelmap
* Add hwaccel presets
* Use hwaccel presets
* Add input arg presets
* Use input arg presets
* Make util to clean up redundant code
* Add support for output arg presets
* Add tests
* Update camera specific to use presets
* Update hwaccel to use presets
* Format files and fix tests
* Rewrite tests to test record correctly
* Move presets from string to list to avoid manually separating into a list
* Add mjpeg cuvid decoder preset
* Fix tests
* Fix comment
* Add ffprobe endpoint
* Get ffprobe for multiple inputs
* Copy ffprobe in output
* Fix bad if statement
* Return full output of ffprobe process
* Return full output of ffprobe process
* Make ffprobe button show dialog with output and option to copy
* Add driver names to consts
* Add driver env var name
* Setup general tracking for GPU stats
* Catch RPi args as well
* Add util to get radeontop results
* Add real amd GPU stats
* Fix missed arg
* pass config
* Use only the values
* Fix vram
* Add nvidia gpu stats
* Use nvidia stats
* Add chart for gpu stats
* Format AMD with space between percent
* Get correct nvidia %
* Start to add support for intel GPU stats
* Block out RPi as util is not currently available
* Formatting
* Fix mypy
* Strip for float conversion
* Strip for float conversion
* Fix percent formatting
* Remove name from gpu map
* Add tests and fix AMD formatting
* Add nvidia gpu stats test
* Formatting
* Add intel_gpu_top for testing
* Formatting
* Handle case where hwaccel is not setup
* Formatting
* Check to remove none
* Don't use set
* Cleanup and fix types
* Handle case where args is list
* Fix mypy
* Cast to str
* Fix type checking
* Return none instead of empty
* Fix organization
* Make keys consistent
* Make gpu match style
* Get support for vainfo
* Add vainfo endpoint
* Set vainfo output in error correctly
* Remove duplicate function
* Fix errors
* Do cpu & gpu work asynchonously
* Fix async
* Fix event loop
* Fix crash
* Fix naming
* Send empty data for gpu if error occurs
* Show error if gpu stats could not be retrieved
* Fix mypy
* Fix test
* Don't use json for vainfo
* Fix cross references
* Strip unicode still
* await vainfo response
* Add gpu deps
* Formatting
* remove comments
* Use empty string
* Add vainfo back in
* Move each camera to a separate card and show per process info
* Install top
* Add support for cpu usage stats
* Use cpu usage stats in debug
* Increase number of runs to ensure good results
* Add ffprobe endpoint
* Get ffprobe for multiple inputs
* Copy ffprobe in output
* Add fps to camera metrics
* Fix lint errors
* Update stats config
* Add ffmpeg pid
* Use grid display so more cameras can take less vertical space
* Fix hanging characters
* Only show the current detector
* Fix bad if statement
* Return full output of ffprobe process
* Return full output of ffprobe process
* Don't specify rtsp_transport
* Make ffprobe button show dialog with output and option to copy
* Adjust ffprobe api to take paths directly
* Add docs for ffprobe api
* Move existing checks to own functions
* Add config check for zone objects that are not tracked
* Add tests for config error
* Formatting
* Catch case where field is defined multiple times and add test
* Add warning for rtmp
* Refactor EdgeTPU and CPU model handling to detector submodules.
* Fix selecting the correct detection device type from the config
* Remove detector type check when creating ObjectDetectProcess
* Fixes after rebasing to 0.11
* Add init file to detector folder
* Rename to detect_api
Co-authored-by: Nicolas Mowen <nickmowen213@gmail.com>
* Add unit test for LocalObjectDetector class
* Add configuration for model inputs
Support transforming detection regions to RGB or BGR.
Support specifying the input tensor shape. The tensor shape has a standard format ["BHWC"] when handed to the detector, but can be transformed in the detector to match the model shape using the model input_tensor config.
* Add documentation for new model config parameters
* Add input tensor transpose to LocalObjectDetector
* Change the model input tensor config to use an enumeration
* Updates for model config documentation
Co-authored-by: Nicolas Mowen <nickmowen213@gmail.com>
* Consts for regex
* Add regex for camera username and password
* Redact user:pass from ffmpeg logs
* Redact ffmpeg commands
* Move common function to util
* Add tests
* Formatting
* Remove unused imports
* Fix test
* Add port to test
* Support special characters in passwords
* Add tests for special character handling
* Remove docs about not supporting special characters
* Add object ratio config parameters
Issue: #2948
* Add config test for object filter ratios
Issue: #2948
* Address review comments
- Accept `ratio` default
- Rename `bounds` to `box` for consistency
- Add migration for new field
Issue: #2948
* Fix logical errors
- field migrations require default values
- `clipped` referenced the wrong index for region, since it shifted
- missed an inclusion of `ratio` for detections in `process_frames`
- revert naming `o[2]` as `box` since it is out of scope!
This has now been test-run against a video, so I believe the kinks are
worked out.
Issue: #2948
* Update contributing notes for `make`
Issue: #2948
* Fix migration
- Ensure that defaults match between Event and migration script
- Deconflict migration script number (from rebase)
Issue: #2948
* Filter objects out of ratio bounds
Issue: #2948
* Update migration file to 009
Issue: #2948
