knx/examples/knx-cc1310/startup_cc13xx_cc26xx_gcc.c

309 lines
10 KiB
C
Raw Normal View History

Add support for CC1310 platform based on SimpleLink SDK (#94) * Initial commit * Clean up * Remove display code * Change cmake build * Add SimpleLink SDK for CC13xx/CC26xx as submodule * Remove commented line from build.sh * Working build * Remove SDK submodule * Squashed 'examples/knx-cc1310/coresdk_cc13xx_cc26xx/' content from commit 0d78d32 git-subtree-dir: examples/knx-cc1310/coresdk_cc13xx_cc26xx git-subtree-split: 0d78d3280357416a5c0388148cda13717c9ffaa5 * Add more comments and enable Power_idleFunc() for NoRTOS variant. Internal SDK driver functions which have to wait for something will cause Power_idleFunc to be called instead of doing busy wait. * Move CC1310 platform init around * Optimize a bit more in debug build config as the binary does not fit into 128Kb flash otherwise. * Explicitly list each source/header file in build config. Use linker group to resolve circular dependencies. * Ignore vscode settings.json * Increase stacks size * Only compile CC1310 source code if #define DeviceFamily_CC13X0 * initial commit of CC1310 RF driver with first working RX version * Better handling of buttonUp() across platforms * Start cleanup * continue cleanup * Fix bau2920 compilation * Continue cleanup * Fix compilation in other examples * Fix compilation * htons() and ntohs() only for SAMD and STM32, but not for Linux and ESP8266 and ESP32 * htons(9 and ntohs() needed for CC13x0 * Continue cleanup * Add CC1310 platform to CI * Fix CI * Use more recent toolchain from ARM * Fix travis * Use Ubuntu Focal * Fix toolchain for travis * Fix package name * Fix toolchain * Add libstdc++-dev package * Add newlib packages * Remove commented commands from CI * Fix travis * Fix compilation of knxPython * Clean up linefeeds * Fix RX callback * Move RF CRC16-DNP to bits.cpp * Fix TX * Optimization: do not calc CRC for block1 again in rf_data_link_layer * Make newline optional in printHex * Cleanup. First working version: ETS5 programming of individual address via KNX/RF coupler. * Use LEDs and Buttons to control ProgMode and Flash Erase * Remove settings.json (VScode) * Add README.md * Update README.md * Update README.md * Fix typo
2020-11-10 21:52:38 +01:00
/*
* Copyright (c) 2017, Texas Instruments Incorporated
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* * Neither the name of Texas Instruments Incorporated nor the names of
* its contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
//*****************************************************************************
//
// Check if compiler is GNU Compiler
//
//*****************************************************************************
#if !(defined(__GNUC__))
#error "startup_cc13xx_cc26xx_gcc.c: Unsupported compiler!"
#endif
#include <string.h>
#include <ti/devices/DeviceFamily.h>
#include DeviceFamily_constructPath(inc/hw_types.h)
#include DeviceFamily_constructPath(driverlib/interrupt.h)
#include DeviceFamily_constructPath(driverlib/setup.h)
//*****************************************************************************
//
// Forward declaration of the default fault handlers.
//
//*****************************************************************************
void resetISR(void);
static void nmiISR(void);
static void faultISR(void);
static void defaultHandler(void);
static void busFaultHandler(void);
//*****************************************************************************
//
// External declaration for the reset handler that is to be called when the
// processor is started
//
//*****************************************************************************
extern void _c_int00(void);
//*****************************************************************************
//
// The entry point for the application.
//
//*****************************************************************************
extern int main(void);
//*****************************************************************************
//
// linker variable that marks the top of stack.
//
//*****************************************************************************
extern unsigned long _stack_end;
//*****************************************************************************
//
// The vector table. Note that the proper constructs must be placed on this to
// ensure that it ends up at physical address 0x0000.0000.
//
//*****************************************************************************
__attribute__ ((section(".resetVecs"))) __attribute__ ((used))
static void (* const resetVectors[16])(void) =
{
(void (*)(void))((uint32_t)&_stack_end),
// The initial stack pointer
resetISR, // The reset handler
nmiISR, // The NMI handler
faultISR, // The hard fault handler
defaultHandler, // The MPU fault handler
busFaultHandler, // The bus fault handler
defaultHandler, // The usage fault handler
0, // Reserved
0, // Reserved
0, // Reserved
0, // Reserved
defaultHandler, // SVCall handler
defaultHandler, // Debug monitor handler
0, // Reserved
defaultHandler, // The PendSV handler
defaultHandler // The SysTick handler
};
__attribute__ ((section(".ramVecs")))
static unsigned long ramVectors[50];
//*****************************************************************************
//
// The following are arrays of pointers to constructor functions that need to
// be called during startup to initialize global objects.
//
//*****************************************************************************
extern void (*__init_array_start []) (void);
extern void (*__init_array_end []) (void);
//*****************************************************************************
//
// The following global variable is required for C++ support.
//
//*****************************************************************************
void * __dso_handle = (void *) &__dso_handle;
//*****************************************************************************
//
// The following are constructs created by the linker, indicating where the
// the "data" and "bss" segments reside in memory. The initializers for the
// for the "data" segment resides immediately following the "text" segment.
//
//*****************************************************************************
extern uint32_t __bss_start__, __bss_end__;
extern uint32_t __data_load__, __data_start__, __data_end__;
//
//*****************************************************************************
//
// Initialize the .data and .bss sections and copy the first 16 vectors from
// the read-only/reset table to the runtime RAM table. Fill the remaining
// vectors with a stub. This vector table will be updated at runtime.
//
//*****************************************************************************
//
void localProgramStart(void)
{
uint32_t * bs;
uint32_t * be;
uint32_t * dl;
uint32_t * ds;
uint32_t * de;
uint32_t count;
uint32_t i;
#if defined (__ARM_ARCH_7EM__) && defined(__VFP_FP__) && !defined(__SOFTFP__)
volatile uint32_t * pui32Cpacr = (uint32_t *) 0xE000ED88;
/* Enable Coprocessor Access Control (CPAC) */
*pui32Cpacr |= (0xF << 20);
#endif
IntMasterDisable();
/* Final trim of device */
SetupTrimDevice();
/* initiailize .bss to zero */
bs = & __bss_start__;
be = & __bss_end__;
while (bs < be) {
*bs = 0;
bs++;
}
/* relocate the .data section */
dl = & __data_load__;
ds = & __data_start__;
de = & __data_end__;
if (dl != ds) {
while (ds < de) {
*ds = *dl;
dl++;
ds++;
}
}
/* Run any constructors */
count = (uint32_t)(__init_array_end - __init_array_start);
for (i = 0; i < count; i++) {
__init_array_start[i]();
}
/* Copy from reset vector table into RAM vector table */
memcpy(ramVectors, resetVectors, 16*4);
/* fill remaining vectors with default handler */
for (i=16; i < 50; i++) {
ramVectors[i] = (unsigned long)defaultHandler;
}
/* Call the application's entry point. */
main();
/* If we ever return signal Error */
faultISR();
}
//*****************************************************************************
//
// This is the code that gets called when the processor first starts execution
// following a reset event. Only the absolutely necessary set is performed,
// after which the application supplied entry() routine is called. Any fancy
// actions (such as making decisions based on the reset cause register, and
// resetting the bits in that register) are left solely in the hands of the
// application.
//
//*****************************************************************************
void __attribute__((naked)) resetISR(void)
{
__asm__ __volatile__ (
" movw r0, #:lower16:resetVectors\n"
" movt r0, #:upper16:resetVectors\n"
" ldr r0, [r0]\n"
" mov sp, r0\n"
" bl localProgramStart"
);
}
//*****************************************************************************
//
// This is the code that gets called when the processor receives a NMI. This
// simply enters an infinite loop, preserving the system state for examination
// by a debugger.
//
//*****************************************************************************
static void
nmiISR(void)
{
/* Enter an infinite loop. */
while(1)
{
}
}
//*****************************************************************************
//
// This is the code that gets called when the processor receives a fault
// interrupt. This simply enters an infinite loop, preserving the system state
// for examination by a debugger.
//
//*****************************************************************************
static void
faultISR(void)
{
/* Enter an infinite loop. */
while(1)
{
}
}
//*****************************************************************************
//
// This is the code that gets called when the processor receives an unexpected
// interrupt. This simply enters an infinite loop, preserving the system state
// for examination by a debugger.
//
//*****************************************************************************
static void
busFaultHandler(void)
{
/* Enter an infinite loop. */
while(1)
{
}
}
//*****************************************************************************
//
// This is the code that gets called when the processor receives an unexpected
// interrupt. This simply enters an infinite loop, preserving the system state
// for examination by a debugger.
//
//*****************************************************************************
static void
defaultHandler(void)
{
/* Enter an infinite loop. */
while(1)
{
}
}
//*****************************************************************************
//
// This function is called by __libc_fini_array which gets called when exit()
// is called. In order to support exit(), an empty _fini() stub function is
// required.
//
//*****************************************************************************
void _fini(void)
{
/* Function body left empty intentionally */
}