knx/examples/knx-cc1310/Board.h

153 lines
6.4 KiB
C
Raw Normal View History

Add support for CC1310 platform based on SimpleLink SDK (#94) * Initial commit * Clean up * Remove display code * Change cmake build * Add SimpleLink SDK for CC13xx/CC26xx as submodule * Remove commented line from build.sh * Working build * Remove SDK submodule * Squashed 'examples/knx-cc1310/coresdk_cc13xx_cc26xx/' content from commit 0d78d32 git-subtree-dir: examples/knx-cc1310/coresdk_cc13xx_cc26xx git-subtree-split: 0d78d3280357416a5c0388148cda13717c9ffaa5 * Add more comments and enable Power_idleFunc() for NoRTOS variant. Internal SDK driver functions which have to wait for something will cause Power_idleFunc to be called instead of doing busy wait. * Move CC1310 platform init around * Optimize a bit more in debug build config as the binary does not fit into 128Kb flash otherwise. * Explicitly list each source/header file in build config. Use linker group to resolve circular dependencies. * Ignore vscode settings.json * Increase stacks size * Only compile CC1310 source code if #define DeviceFamily_CC13X0 * initial commit of CC1310 RF driver with first working RX version * Better handling of buttonUp() across platforms * Start cleanup * continue cleanup * Fix bau2920 compilation * Continue cleanup * Fix compilation in other examples * Fix compilation * htons() and ntohs() only for SAMD and STM32, but not for Linux and ESP8266 and ESP32 * htons(9 and ntohs() needed for CC13x0 * Continue cleanup * Add CC1310 platform to CI * Fix CI * Use more recent toolchain from ARM * Fix travis * Use Ubuntu Focal * Fix toolchain for travis * Fix package name * Fix toolchain * Add libstdc++-dev package * Add newlib packages * Remove commented commands from CI * Fix travis * Fix compilation of knxPython * Clean up linefeeds * Fix RX callback * Move RF CRC16-DNP to bits.cpp * Fix TX * Optimization: do not calc CRC for block1 again in rf_data_link_layer * Make newline optional in printHex * Cleanup. First working version: ETS5 programming of individual address via KNX/RF coupler. * Use LEDs and Buttons to control ProgMode and Flash Erase * Remove settings.json (VScode) * Add README.md * Update README.md * Update README.md * Fix typo
2020-11-10 21:52:38 +01:00
/*
* Copyright (c) 2015-2019, Texas Instruments Incorporated
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* * Neither the name of Texas Instruments Incorporated nor the names of
* its contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef __BOARD_H
#define __BOARD_H
#define Board_CC1310_LAUNCHXL
#ifdef __cplusplus
extern "C" {
#endif
#include <ti/drivers/Board.h>
#define Board_initGeneral() Board_init() /* deprecated */
#include "CC1310_LAUNCHXL.h"
#define Board_shutDownExtFlash() CC1310_LAUNCHXL_shutDownExtFlash()
#define Board_wakeUpExtFlash() CC1310_LAUNCHXL_wakeUpExtFlash()
/* These #defines allow us to reuse TI-RTOS across other device families */
#define Board_ADC0 CC1310_LAUNCHXL_ADC0
#define Board_ADC1 CC1310_LAUNCHXL_ADC1
#define Board_ADCBUF0 CC1310_LAUNCHXL_ADCBUF0
#define Board_ADCBUF0CHANNEL0 CC1310_LAUNCHXL_ADCBUF0CHANNEL0
#define Board_ADCBUF0CHANNEL1 CC1310_LAUNCHXL_ADCBUF0CHANNEL1
#define Board_CRYPTO0 CC1310_LAUNCHXL_CRYPTO0
#define Board_AESCCM0 CC1310_LAUNCHXL_AESCCM0
#define Board_AESGCM0 CC1310_LAUNCHXL_AESGCM0
#define Board_AESCBC0 CC1310_LAUNCHXL_AESCBC0
#define Board_AESCTR0 CC1310_LAUNCHXL_AESCTR0
#define Board_AESECB0 CC1310_LAUNCHXL_AESECB0
#define Board_AESCTRDRBG0 CC1310_LAUNCHXL_AESCTRDRBG0
#define Board_TRNG0 CC1310_LAUNCHXL_TRNG0
#define Board_DIO0 CC1310_LAUNCHXL_DIO0
#define Board_DIO1 CC1310_LAUNCHXL_DIO1
#define Board_DIO12 CC1310_LAUNCHXL_DIO12
#define Board_DIO15 CC1310_LAUNCHXL_DIO15
#define Board_DIO16_TDO CC1310_LAUNCHXL_DIO16_TDO
#define Board_DIO17_TDI CC1310_LAUNCHXL_DIO17_TDI
#define Board_DIO21 CC1310_LAUNCHXL_DIO21
#define Board_DIO22 CC1310_LAUNCHXL_DIO22
#define Board_GPIO_BUTTON0 CC1310_LAUNCHXL_GPIO_S1
#define Board_GPIO_BUTTON1 CC1310_LAUNCHXL_GPIO_S2
#define Board_GPIO_BTN1 CC1310_LAUNCHXL_GPIO_S1
#define Board_GPIO_BTN2 CC1310_LAUNCHXL_GPIO_S2
#define Board_GPIO_LED0 CC1310_LAUNCHXL_GPIO_LED_RED
#define Board_GPIO_LED1 CC1310_LAUNCHXL_GPIO_LED_GREEN
#define Board_GPIO_RLED CC1310_LAUNCHXL_GPIO_LED_RED
#define Board_GPIO_GLED CC1310_LAUNCHXL_GPIO_LED_GREEN
#define Board_GPIO_LED_ON CC1310_LAUNCHXL_GPIO_LED_ON
#define Board_GPIO_LED_OFF CC1310_LAUNCHXL_GPIO_LED_OFF
#define Board_GPIO_TMP116_EN CC1310_LAUNCHXL_GPIO_TMP116_EN
#define Board_GPTIMER0A CC1310_LAUNCHXL_GPTIMER0A
#define Board_GPTIMER0B CC1310_LAUNCHXL_GPTIMER0B
#define Board_GPTIMER1A CC1310_LAUNCHXL_GPTIMER1A
#define Board_GPTIMER1B CC1310_LAUNCHXL_GPTIMER1B
#define Board_GPTIMER2A CC1310_LAUNCHXL_GPTIMER2A
#define Board_GPTIMER2B CC1310_LAUNCHXL_GPTIMER2B
#define Board_GPTIMER3A CC1310_LAUNCHXL_GPTIMER3A
#define Board_GPTIMER3B CC1310_LAUNCHXL_GPTIMER3B
#define Board_I2C0 CC1310_LAUNCHXL_I2C0
#define Board_I2C_TMP CC1310_LAUNCHXL_I2C0
#define Board_I2S0 CC1310_LAUNCHXL_I2S0
#define Board_I2S_ADO CC1310_LAUNCHXL_I2S_ADO
#define Board_I2S_ADI CC1310_LAUNCHXL_I2S_ADI
#define Board_I2S_BCLK CC1310_LAUNCHXL_I2S_BCLK
#define Board_I2S_MCLK CC1310_LAUNCHXL_I2S_MCLK
#define Board_I2S_WCLK CC1310_LAUNCHXL_I2S_WCLK
#define Board_NVSINTERNAL CC1310_LAUNCHXL_NVSCC26XX0
#define Board_NVSEXTERNAL CC1310_LAUNCHXL_NVSSPI25X0
#define Board_PIN_BUTTON0 CC1310_LAUNCHXL_PIN_BTN1
#define Board_PIN_BUTTON1 CC1310_LAUNCHXL_PIN_BTN2
#define Board_PIN_BTN1 CC1310_LAUNCHXL_PIN_BTN1
#define Board_PIN_BTN2 CC1310_LAUNCHXL_PIN_BTN2
#define Board_PIN_LED0 CC1310_LAUNCHXL_PIN_RLED
#define Board_PIN_LED1 CC1310_LAUNCHXL_PIN_GLED
#define Board_PIN_LED2 CC1310_LAUNCHXL_PIN_RLED
#define Board_PIN_RLED CC1310_LAUNCHXL_PIN_RLED
#define Board_PIN_GLED CC1310_LAUNCHXL_PIN_GLED
#define Board_PWM0 CC1310_LAUNCHXL_PWM0
#define Board_PWM1 CC1310_LAUNCHXL_PWM1
#define Board_PWM2 CC1310_LAUNCHXL_PWM2
#define Board_PWM3 CC1310_LAUNCHXL_PWM3
#define Board_PWM4 CC1310_LAUNCHXL_PWM4
#define Board_PWM5 CC1310_LAUNCHXL_PWM5
#define Board_PWM6 CC1310_LAUNCHXL_PWM6
#define Board_PWM7 CC1310_LAUNCHXL_PWM7
#define Board_SD0 CC1310_LAUNCHXL_SDSPI0
#define Board_SPI0 CC1310_LAUNCHXL_SPI0
#define Board_SPI1 CC1310_LAUNCHXL_SPI1
#define Board_SPI_FLASH_CS CC1310_LAUNCHXL_SPI_FLASH_CS
#define Board_FLASH_CS_ON 0
#define Board_FLASH_CS_OFF 1
#define Board_SPI_MASTER CC1310_LAUNCHXL_SPI0
#define Board_SPI_SLAVE CC1310_LAUNCHXL_SPI0
#define Board_SPI_MASTER_READY CC1310_LAUNCHXL_SPI_MASTER_READY
#define Board_SPI_SLAVE_READY CC1310_LAUNCHXL_SPI_SLAVE_READY
#define Board_UART0 CC1310_LAUNCHXL_UART0
#define Board_WATCHDOG0 CC1310_LAUNCHXL_WATCHDOG0
#ifdef __cplusplus
}
#endif
#endif /* __BOARD_H */