Mirrors/knx
1
0
Fork 0
mirror of https://github.com/thelsing/knx.git synced 2025-08-22 13:46:21 +02:00
Code Issues Packages Projects Releases Wiki Activity

Update knx-demo.ino

Browse Source
This commit is contained in:
Maggyver 2019-05-22 20:52:50 +02:00 committed by GitHub
parent e09f441de0
commit 9ac9a55107
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 15 additions and 10 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

25
examples/knx-demo/knx-demo.ino
View File

@ -59,6 +59,11 @@ void setup()
randomSeed(millis()); randomSeed(millis());
#ifdef ARDUINO_ARCH_ESP8266
WiFiManager wifiManager;
wifiManager.autoConnect("knx-demo");
#endif
// read adress table, association table, groupobject table and parameters from eeprom // read adress table, association table, groupobject table and parameters from eeprom
knx.readMemory(); knx.readMemory();
@ -75,16 +80,16 @@ void setup()
SerialDBG.print("Abgleich: "); SerialDBG.println(knx.paramByte(4)); SerialDBG.print("Abgleich: "); SerialDBG.println(knx.paramByte(4));
} }
#ifdef ARDUINO_ARCH_ESP8266 #ifdef ARDUINO_ARCH_ESP8266
// GPIO (?) of the ESP8266, in which case this is determined by the board selection // GPIO (?) of the ESP8266, in which case this is determined by the board selection
knx.ledPin(LED_BUILTIN); knx.ledPin(LED_BUILTIN);
// GPIO (?) of the ESP8266, the value depends on the circuit used on the board of the led // GPIO (?) of the ESP8266, the value depends on the circuit used on the board of the led
// if "0" or "low" then the output switches to gnd, at "1" or "high" the output switches to vcc // if "0" or "low" then the output switches to gnd, at "1" or "high" the output switches to vcc
// if the next line is commented out then the default is: output switches to gnd // if the next line is commented out then the default is: output switches to gnd
//knx.ledPinActiveOn(HIGH); //knx.ledPinActiveOn(HIGH);
// GPIO (14) of the ESP8266, in which case it is the connector pin D5 on WeMos D1 R2 // GPIO (14) of the ESP8266, in which case it is the connector pin D5 on WeMos D1 R2
knx.buttonPin(14); knx.buttonPin(14);
#endif #endif
// start the framework. Will get wifi first. // start the framework. Will get wifi first.
knx.start(); knx.start();