add example to correct folder

This commit is contained in:
Thomas Kunze 2018-04-10 00:16:34 +02:00
parent 809de53cc8
commit ff5dabad3b
2 changed files with 83 additions and 70 deletions

View File

@ -1,11 +1,7 @@
#include <EEPROM.h> #include <EEPROM.h>
#include "knx_esp.h" #include "knx_esp.h"
float currentValue = 0; // declare array of all groupobjects with their sizes in byte
float maxValue = 0;
float minValue = RAND_MAX;
long lastsend = 0;
GroupObject groupObjects[] GroupObject groupObjects[]
{ {
GroupObject(2), GroupObject(2),
@ -14,13 +10,20 @@ GroupObject groupObjects[]
GroupObject(1) GroupObject(1)
}; };
// create named references for easy access to group objects
GroupObject& goCurrent = groupObjects[0]; GroupObject& goCurrent = groupObjects[0];
GroupObject& goMax = groupObjects[1]; GroupObject& goMax = groupObjects[1];
GroupObject& goMin = groupObjects[2]; GroupObject& goMin = groupObjects[2];
GroupObject& goReset = groupObjects[3]; GroupObject& goReset = groupObjects[3];
float currentValue = 0;
float maxValue = 0;
float minValue = RAND_MAX;
long lastsend = 0;
void measureTemp() void measureTemp()
{ {
long now = millis(); long now = millis();
if ((now - lastsend) < 2000) if ((now - lastsend) < 2000)
return; return;
@ -30,6 +33,7 @@ void measureTemp()
currentValue = (r * 1.0) / (RAND_MAX * 1.0); currentValue = (r * 1.0) / (RAND_MAX * 1.0);
currentValue *= 100 * 100; currentValue *= 100 * 100;
// write new value to groupobject
goCurrent.objectWriteFloat(currentValue); goCurrent.objectWriteFloat(currentValue);
if (currentValue > maxValue) if (currentValue > maxValue)
@ -45,6 +49,7 @@ void measureTemp()
} }
} }
// callback from reset-GO
void resetCallback(GroupObject& go) void resetCallback(GroupObject& go)
{ {
if (go.objectReadBool()) if (go.objectReadBool())
@ -61,11 +66,15 @@ void setup()
randomSeed(millis()); randomSeed(millis());
// register group objects
knx.registerGroupObjects(groupObjects, 4); knx.registerGroupObjects(groupObjects, 4);
// read adress table, association table, groupobject table and parameters from eeprom
knx.readMemory(); knx.readMemory();
// register callback for reset GO
goReset.updateHandler = resetCallback; goReset.updateHandler = resetCallback;
// print values of parameters if device is already configured
if (knx.configured()) if (knx.configured())
{ {
Serial.printf("Timeout: %d\n", knx.paramByte(0)); Serial.printf("Timeout: %d\n", knx.paramByte(0));
@ -75,12 +84,16 @@ void setup()
Serial.printf("Abgleich %d\n", knx.paramByte(4)); Serial.printf("Abgleich %d\n", knx.paramByte(4));
} }
// start the framework. Will get wifi first.
knx.start(); knx.start();
} }
void loop() void loop()
{ {
// don't delay here to much. Otherwise you might lose packages or mess up the timing with ETS
knx.loop(); knx.loop();
// only run the application code if the device was configured with ETS
if (!knx.configured()) if (!knx.configured())
return; return;