Commit Graph

11 Commits

Author SHA1 Message Date
Dennis Fleurbaaij
f169e20f2f
opt-out global KNX, ability to DIY construct knx object, minor cleanups (#121)
* Refactored the knx_facade a bit to make the auto-building of the global knx object and the buttonUp() ISR function opt-in. Also added the ability to quite easily attach another serial (in this case tested with Serial2 of an ESP32).

* Added visual studio code temp files to .gitignore

* Fix for missing build flag for WifiManager in ESP32_ip demo

* Added example in which we DIY build the KNX object and use ESP32's second UART to connect so that you can debug with the first one that's connected to USB.

* Minor platform cleanups to remove compilation warnings.

* ESP32 can't handle the defaulted 8192 byte EPROM. Next to that I needed to begin() the eprom lib in my setup() to get it to work and that requires knowing how much memory KNX will use. This fix makes the default more conservative and moves it's definition to the .h file so that other files can always use it as well.

* After comments from thelsing, inverted the logic. The default global knx object is now opt-out by defining KNX_NO_AUTOMATIC_GLOBAL_INSTANCE. See the knx-demo-diy project for an example.
Minor syntactic cleanups.

* Removed hardwareserial from facade (detail which was not needed)
Placed facade constructors together
Minor syntactic cleanup

* Fixed knx-cc1310 where own button routine was calling now private internal knx facade variable.
Renamed files in knx-demo-diy
Minor syntactic stuff

* Added gitattributes for binary knxprod files
2021-02-05 15:57:45 +01:00
nanosonde
d90843ba45
Add support for CC1310 platform based on SimpleLink SDK (#94)
* Initial commit

* Clean up

* Remove display code

* Change cmake build

* Add SimpleLink SDK for CC13xx/CC26xx as submodule

* Remove commented line from build.sh

* Working build

* Remove SDK submodule

* Squashed 'examples/knx-cc1310/coresdk_cc13xx_cc26xx/' content from commit 0d78d32

git-subtree-dir: examples/knx-cc1310/coresdk_cc13xx_cc26xx
git-subtree-split: 0d78d3280357416a5c0388148cda13717c9ffaa5

* Add more comments and enable Power_idleFunc() for NoRTOS variant.
Internal SDK driver functions which have to wait for something
will cause Power_idleFunc to be called instead of doing busy wait.

* Move CC1310 platform init around

* Optimize a bit more in debug build config as the binary does not fit into 128Kb flash otherwise.

* Explicitly list each source/header file in build config. Use linker group to resolve circular dependencies.

* Ignore vscode settings.json

* Increase stacks size

* Only compile CC1310 source code if #define DeviceFamily_CC13X0

* initial commit of CC1310 RF driver with first working RX version

* Better handling of buttonUp() across platforms

* Start cleanup

* continue cleanup

* Fix bau2920 compilation

* Continue cleanup

* Fix compilation in other examples

* Fix compilation

* htons() and ntohs() only for SAMD and STM32, but not for Linux and ESP8266 and ESP32

* htons(9 and ntohs() needed for CC13x0

* Continue cleanup

* Add CC1310 platform to CI

* Fix CI

* Use more recent toolchain from ARM

* Fix travis

* Use Ubuntu Focal

* Fix toolchain for travis

* Fix package name

* Fix toolchain

* Add libstdc++-dev package

* Add newlib packages

* Remove commented commands from CI

* Fix travis

* Fix compilation of knxPython

* Clean up linefeeds

* Fix RX callback

* Move RF CRC16-DNP to bits.cpp

* Fix TX

* Optimization: do not calc CRC for block1 again in rf_data_link_layer

* Make newline optional in printHex

* Cleanup. First working version: ETS5 programming of individual address via KNX/RF coupler.

* Use LEDs and Buttons to control ProgMode and Flash Erase

* Remove settings.json (VScode)

* Add README.md

* Update README.md

* Update README.md

* Fix typo
2020-11-10 21:52:38 +01:00
Thomas Kunze
c31053a7fd add pio ignores to gitignore 2020-05-08 02:06:23 +02:00
Thomas Kunze
ff2928a09b ignore sphinx output dir 2019-07-06 01:41:03 +02:00
Thomas Kunze
63d6d07e86 document multicast methods of applicationlayer and transportlayer 2019-07-05 23:53:43 +02:00
Thomas Kunze
954931abdc add setup.py for publishing on pypi. 2019-06-29 22:43:52 +02:00
Thomas Kunze
4ab96db96e add vs cmake files; fix knxPython 2019-06-29 00:48:57 +02:00
Thomas Kunze
069bbcde8c change documentation 2019-05-14 00:54:40 +02:00
Thomas Kunze
4493631031 remove submodule (hopefully) 2018-11-07 21:30:20 +01:00
Thomas Kunze
2a292ae314 switch to visualgdb, update submodule 2018-08-16 23:58:57 +02:00
Thomas Kunze
a7a48b4a7b initial checkin 2018-03-16 00:48:39 +01:00