* Fix not-relative include
throws if a include directory is not set.
* add forgotten defined() in environment checking '#elif's
* fix mis-spelled "config.j"
* Add float type support to Parameters
All 3 encodings supported.
* Using dptconvert functions to handle parameters handling
* Initial commit
* Clean up
* Remove display code
* Change cmake build
* Add SimpleLink SDK for CC13xx/CC26xx as submodule
* Remove commented line from build.sh
* Working build
* Remove SDK submodule
* Squashed 'examples/knx-cc1310/coresdk_cc13xx_cc26xx/' content from commit 0d78d32
git-subtree-dir: examples/knx-cc1310/coresdk_cc13xx_cc26xx
git-subtree-split: 0d78d3280357416a5c0388148cda13717c9ffaa5
* Add more comments and enable Power_idleFunc() for NoRTOS variant.
Internal SDK driver functions which have to wait for something
will cause Power_idleFunc to be called instead of doing busy wait.
* Move CC1310 platform init around
* Optimize a bit more in debug build config as the binary does not fit into 128Kb flash otherwise.
* Explicitly list each source/header file in build config. Use linker group to resolve circular dependencies.
* Ignore vscode settings.json
* Increase stacks size
* Only compile CC1310 source code if #define DeviceFamily_CC13X0
* initial commit of CC1310 RF driver with first working RX version
* Better handling of buttonUp() across platforms
* Start cleanup
* continue cleanup
* Fix bau2920 compilation
* Continue cleanup
* Fix compilation in other examples
* Fix compilation
* htons() and ntohs() only for SAMD and STM32, but not for Linux and ESP8266 and ESP32
* htons(9 and ntohs() needed for CC13x0
* Continue cleanup
* Add CC1310 platform to CI
* Fix CI
* Use more recent toolchain from ARM
* Fix travis
* Use Ubuntu Focal
* Fix toolchain for travis
* Fix package name
* Fix toolchain
* Add libstdc++-dev package
* Add newlib packages
* Remove commented commands from CI
* Fix travis
* Fix compilation of knxPython
* Clean up linefeeds
* Fix RX callback
* Move RF CRC16-DNP to bits.cpp
* Fix TX
* Optimization: do not calc CRC for block1 again in rf_data_link_layer
* Make newline optional in printHex
* Cleanup. First working version: ETS5 programming of individual address via KNX/RF coupler.
* Use LEDs and Buttons to control ProgMode and Flash Erase
* Remove settings.json (VScode)
* Add README.md
* Update README.md
* Update README.md
* Fix typo
* Add inital serial port support for Linux platform
* Add missing print implementation for uint64_t and enable mask 07B0 for Linux platform using TPUART
* Create executable per mask
* Add one executable per mask for coupler
* save work.
* save work
* save work
* save work
* save work
* Remember which interface received the cemi frame
* save work
* save work
* save work
* Use default value from PID_ROUTING_COUNT
* Add simple alternative to std::function without smart pointers or move semantics
* Remove include
* Add more comments about cleanup
* save work
* Remove forgotten code.
* Move crc16Ccitt to bits.c as it also used for PID_MCB
* save work
* move comment
* save work
* save work
* save work
* save work
* save work
* save work
* save work
* derive from TableObject instead of InterfaceObject
* save work
* save work
* Fix wrong pointer arithmetic in TableObject
* Filter table setting/clearing
* move comment
* save work
* save work
* save work
* handle SBC on closed media
* save work
* move coupler example to different dir
* Restore device example for linux
* save work
* Remove MEDIUM_TYPE and use MASK_VERSION
* save work
* save work
* save work
* save work
* save work
* save work
* save work
* save work
* save work
* save work
* save work
* save work
* save work
* save work
* Replace MEDIUM_TYPE by MASK_VERSION
* Remove adafruit/travis-ci tests
* Disable travis ci cache for platformio
* Fix missing changes
* Fix cemi server and add missing MASK_VERSION definitions
* Enable platformio caching on travis ci again
* Handle device address update for routing decision
* source address is set in network layer and not in data link layer
* Add remaining APCI types that are used with system broadcast
* Add debug print for routing
* Remove simple_functional
* Fix CMakLists.txt
* Use MASK_VERSION to conditionally compile code.
* Remove fixed version reuqirement from platform esp8266
* Add demo-coupler for MCUs
* Remove simple_functional.h from demo knx-linux
* Enable CI for coupler demos
* Correct path for knx-linux-coupler
* Fix knx_facade.h
* Refactor NetworkLayer to use getInterface() for devices and getPrimaryInterface(), getSecondaryInterface() for couplers
* Add platformio configs for other currently possible mask/platform combinations
* Add class diagrams and remove obsolete includes
* Add some minimal docs
* initial comic
* save work
* Handle SystemBroadcast and Broadcast for TP and IP
* Rework
* Fix comment
* save work
* save work
* save work
* save work
* save work
* Restore old broadcast structure
* Readd systembroadcast methods
* Make sure that services from SystemBroadcast are also available from Broadcast on closed media
* save work
* Save work
* save work
* Save work
* save work
* save work
* save work
* save work
* save work
* Change maximum number of elements for the key tables, etc.
* save work
* First working seqno sync with ETS
* save work
* save work
* save work
* save work
* save work
* save work
* Remove magic value and add comment
* save work
* Extend restart and masterreset for factory reset
* save work
* First working secure broadcast mode with IA programming
* Add FunctionPropertyExt* AL services
* Fix FunctionPropertyExt*. Working T_DATA_CONNECTED with FunctionPropertyExt*.
* Add PropertyValueExt* AL services. Handle master reset in AL service RESTART.
* Fix FunctionPropertyExtStateRead, fix restart. MILESTONE: Working physical programming of IA and toolkey with confirmed restart. Reading deviceinfos working.
* Handle PDT_CONTROL in FunctionPropertyExt*
* Fix FunctionPropertyExt* and FunctionProperty for PDT_CONTROL
* Change comment.
* save work
* save work
* Add group object security handling
* Move map to own file
* use simple_map
* Include simple_map.h in CmakeFile
* Move code from header to source file
* Remove obsolete code
* MILESTONE: working programming of secure device with IA and tables
* cleanup
* bugfix
* flashSize must be big enough. Security IF object contains a lot more data.
* Merge master into feat_datasecure
* Revert "Merge master into feat_datasecure"
This reverts commit 0c8358692a.
* Revert "Revert "Merge master into feat_datasecure""
This reverts commit aa59253785.
* Bugfixes
* cleanup
* cleanup
* Add printing of uint64_t
* Don't compile secapplayer if data secure not enabled
* pin platform for ESP8266 to specific version
* SecIfObject: save/restore required for persisting STATE. Bugfix: use correct PID for group key table
* Cleanup comment and debug output
* Further cleanup.
* Refactor master reset
* Remove unused IP data link layer test code
* Only reset TOOL kkey to FDSK on factory reset
* Modify .gitignore and remove vscode config file
* Correct comment
* Handle SBC flag (systembroadcast) in SCF field. Couplers between open and closed media need this.
* Remove code that slipped in.
* Bugfix for property entry 0 and PID_IO_LIST
* Remove unsused method
* Fix comment and add missing size adjustment in other method
* Callback properties must return valid data on startIndex 0. The return value must contain the actual element count within the property.
* Fix Stm32 Eeprom handler
Fix missing parenthesis
Fix some type consistencies
* Fix#73
Add ability to override config.h with define NO_KNX_CONFIG
* change tabs to space
* coding style
* Allow lambda on platforms which support it, can be forced with HAS_FUNCTIONAL 0/1
* remove automatic detection of functional due to breakage with some platforms:
In file included from /home/travis/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/arm-none-eabi/include/c++/7.2.1/bits/char_traits.h:39:0,
from /home/travis/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/arm-none-eabi/include/c++/7.2.1/string:40,
from /home/travis/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/arm-none-eabi/include/c++/7.2.1/stdexcept:39,
from /home/travis/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/arm-none-eabi/include/c++/7.2.1/array:39,
from /home/travis/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/arm-none-eabi/include/c++/7.2.1/tuple:39,
from /home/travis/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/arm-none-eabi/include/c++/7.2.1/functional:54,
from /home/travis/arduino_ide/libraries/Adafruit_Test_Library/src/knx/group_object.h:37,
from /home/travis/arduino_ide/libraries/Adafruit_Test_Library/src/knx/group_object_table_object.h:4,
from /home/travis/arduino_ide/libraries/Adafruit_Test_Library/src/knx/bau_systemB.h:8,
from /home/travis/arduino_ide/libraries/Adafruit_Test_Library/src/knx/bau07B0.h:4,
from /home/travis/arduino_ide/libraries/Adafruit_Test_Library/src/knx_facade.h:12,
from /home/travis/arduino_ide/libraries/Adafruit_Test_Library/src/knx.h:86,
from /home/travis/build/thelsing/knx/examples/knx-bme680/knx-bme680.ino:4:
/home/travis/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/arm-none-eabi/include/c++/7.2.1/bits/stl_algobase.h:243:56: error: macro "min" passed 3 arguments, but takes just 2
min(const _Tp& __a, const _Tp& __b, _Compare __comp)
^
/home/travis/.arduino15/packages/arduino/tools/arm-none-eabi-gcc/7-2017q4/arm-none-eabi/include/c++/7.2.1/bits/stl_algobase.h:265:56: error: macro "max" passed 3 arguments, but takes just 2
max(const _Tp& __a, const _Tp& __b, _Compare __comp)
^
To be investigated...
Co-authored-by: etrinh <etrinh@zdionline.net>
* Add missing source files
* Fix comment
* Refactor Broadcast/SystemBroadcast
* Add empty confirm methods
* Remove unclean solution to suppress warning about unsed var
* Restore old structure
* Fix issues
* Add more missing source files
* Make sure that services from SystemBroadcast are also available from Broadcast on closed media
* Make sure that sent broadcast/systembroadcast frames are always marked as broadcast frames on closed media
* Disable knx-usb example
* Update python to 3.8
* Enable knx-usb example
* Update to Arduino 1.8.11
* Pin to version 1.8.11
* Use python 3.7
* Use python 3.8 and fix path
* Fix paths and remove obsolete stuff
* Add lib Wire to deps.
* Use Adafruit TinyUSB lib version 0.7.1
