knx/examples/knx-cc1310/CMakeLists.txt
nanosonde d90843ba45
Add support for CC1310 platform based on SimpleLink SDK (#94)
* Initial commit

* Clean up

* Remove display code

* Change cmake build

* Add SimpleLink SDK for CC13xx/CC26xx as submodule

* Remove commented line from build.sh

* Working build

* Remove SDK submodule

* Squashed 'examples/knx-cc1310/coresdk_cc13xx_cc26xx/' content from commit 0d78d32

git-subtree-dir: examples/knx-cc1310/coresdk_cc13xx_cc26xx
git-subtree-split: 0d78d3280357416a5c0388148cda13717c9ffaa5

* Add more comments and enable Power_idleFunc() for NoRTOS variant.
Internal SDK driver functions which have to wait for something
will cause Power_idleFunc to be called instead of doing busy wait.

* Move CC1310 platform init around

* Optimize a bit more in debug build config as the binary does not fit into 128Kb flash otherwise.

* Explicitly list each source/header file in build config. Use linker group to resolve circular dependencies.

* Ignore vscode settings.json

* Increase stacks size

* Only compile CC1310 source code if #define DeviceFamily_CC13X0

* initial commit of CC1310 RF driver with first working RX version

* Better handling of buttonUp() across platforms

* Start cleanup

* continue cleanup

* Fix bau2920 compilation

* Continue cleanup

* Fix compilation in other examples

* Fix compilation

* htons() and ntohs() only for SAMD and STM32, but not for Linux and ESP8266 and ESP32

* htons(9 and ntohs() needed for CC13x0

* Continue cleanup

* Add CC1310 platform to CI

* Fix CI

* Use more recent toolchain from ARM

* Fix travis

* Use Ubuntu Focal

* Fix toolchain for travis

* Fix package name

* Fix toolchain

* Add libstdc++-dev package

* Add newlib packages

* Remove commented commands from CI

* Fix travis

* Fix compilation of knxPython

* Clean up linefeeds

* Fix RX callback

* Move RF CRC16-DNP to bits.cpp

* Fix TX

* Optimization: do not calc CRC for block1 again in rf_data_link_layer

* Make newline optional in printHex

* Cleanup. First working version: ETS5 programming of individual address via KNX/RF coupler.

* Use LEDs and Buttons to control ProgMode and Flash Erase

* Remove settings.json (VScode)

* Add README.md

* Update README.md

* Update README.md

* Fix typo
2020-11-10 21:52:38 +01:00

211 lines
6.8 KiB
CMake

##
## KNX for CC1310
##
cmake_minimum_required(VERSION 3.12)
if(NOT DEFINED CMAKE_TOOLCHAIN_FILE)
set(CMAKE_TOOLCHAIN_FILE "${CMAKE_CURRENT_SOURCE_DIR}/cmake/toolchain-arm-none-eabi.cmake")
endif()
project(knx-cc1310 C CXX ASM)
# Generate a "compile_commands.json" file containing the exact compiler calls for all translation units of the project in machine-readable form.
# Useful for C/CPP extension of VS code
set(CMAKE_EXPORT_COMPILE_COMMANDS ON)
# Use <Package>_ROOT variables for locating in find_path, find_package, etc.
cmake_policy(SET CMP0074 NEW)
# Append current directory to CMAKE_MODULE_PATH for making device specific cmake modules visible
list(APPEND CMAKE_MODULE_PATH ${CMAKE_CURRENT_LIST_DIR}/cmake)
message("CMAKE_MODULE_PATH: ${CMAKE_MODULE_PATH}")
# Configure Toolchain for CC13xx
set(LINKER_SCRIPT "${CMAKE_CURRENT_SOURCE_DIR}/CC1310_LAUNCHXL_NoRTOS.lds")
include(cc13xx)
set(SimpleLinkCC13X0SDKnortos_ROOT "${CMAKE_CURRENT_SOURCE_DIR}/coresdk_cc13xx_cc26xx")
message("SimpleLinkCC13X0SDKnortos_ROOT: ${SimpleLinkCC13X0SDKnortos_ROOT}")
# Find dependencies
find_package(SimpleLinkCC13X0SDKnortos REQUIRED)
#
# Target
#
set(${PROJECT_NAME}_SOURCES
../../src/knx/address_table_object.cpp
../../src/knx/address_table_object.h
../../src/knx/aes.c
../../src/knx/aes.h
../../src/knx/aes.hpp
../../src/knx/apdu.cpp
../../src/knx/apdu.h
../../src/knx/application_layer.cpp
../../src/knx/application_layer.h
../../src/knx/application_program_object.cpp
../../src/knx/application_program_object.h
../../src/knx/association_table_object.cpp
../../src/knx/association_table_object.h
../../src/knx/bau.cpp
../../src/knx/bau.h
../../src/knx/bau07B0.cpp
../../src/knx/bau07B0.h
../../src/knx/bau091A.cpp
../../src/knx/bau091A.h
../../src/knx/bau27B0.cpp
../../src/knx/bau27B0.h
../../src/knx/bau2920.cpp
../../src/knx/bau2920.h
../../src/knx/bau57B0.cpp
../../src/knx/bau57B0.h
../../src/knx/bau_systemB.cpp
../../src/knx/bau_systemB.h
../../src/knx/bau_systemB_device.cpp
../../src/knx/bau_systemB_device.h
../../src/knx/bau_systemB_coupler.cpp
../../src/knx/bau_systemB_coupler.h
../../src/knx/bits.cpp
../../src/knx/bits.h
../../src/knx/callback_property.h
../../src/knx/cemi_frame.cpp
../../src/knx/cemi_frame.h
../../src/knx/cemi_server.cpp
../../src/knx/cemi_server.h
../../src/knx/cemi_server_object.cpp
../../src/knx/cemi_server_object.h
../../src/knx/config.h
../../src/knx/data_link_layer.cpp
../../src/knx/data_link_layer.h
../../src/knx/data_property.cpp
../../src/knx/data_property.h
../../src/knx/device_object.cpp
../../src/knx/device_object.h
../../src/knx/dpt.cpp
../../src/knx/dpt.h
../../src/knx/dptconvert.cpp
../../src/knx/dptconvert.h
../../src/knx/function_property.h
../../src/knx/group_object.cpp
../../src/knx/group_object.h
../../src/knx/group_object_table_object.cpp
../../src/knx/group_object_table_object.h
../../src/knx/interface_object.cpp
../../src/knx/interface_object.h
../../src/knx/ip_data_link_layer.cpp
../../src/knx/ip_data_link_layer.h
../../src/knx/ip_parameter_object.cpp
../../src/knx/ip_parameter_object.h
../../src/knx/knx_ip_device_information_dib.cpp
../../src/knx/knx_ip_device_information_dib.h
../../src/knx/knx_ip_dib.cpp
../../src/knx/knx_ip_dib.h
../../src/knx/knx_ip_frame.cpp
../../src/knx/knx_ip_frame.h
../../src/knx/knx_ip_routing_indication.cpp
../../src/knx/knx_ip_routing_indication.h
../../src/knx/knx_ip_search_request.cpp
../../src/knx/knx_ip_search_request.h
../../src/knx/knx_ip_search_response.cpp
../../src/knx/knx_ip_search_response.h
../../src/knx/knx_ip_supported_service_dib.cpp
../../src/knx/knx_ip_supported_service_dib.h
../../src/knx/ip_host_protocol_address_information.cpp
../../src/knx/ip_host_protocol_address_information.h
../../src/knx/knx_types.h
../../src/knx/knx_value.cpp
../../src/knx/knx_value.h
../../src/knx/memory.cpp
../../src/knx/memory.h
../../src/knx/network_layer.cpp
../../src/knx/network_layer.h
../../src/knx/network_layer_coupler.cpp
../../src/knx/network_layer_coupler.h
../../src/knx/network_layer_device.cpp
../../src/knx/network_layer_device.h
../../src/knx/network_layer_entity.cpp
../../src/knx/network_layer_entity.h
../../src/knx/npdu.cpp
../../src/knx/npdu.h
../../src/knx/platform.cpp
../../src/knx/platform.h
../../src/knx/property.cpp
../../src/knx/property.h
../../src/knx/rf_data_link_layer.cpp
../../src/knx/rf_data_link_layer.h
../../src/knx/rf_medium_object.cpp
../../src/knx/rf_medium_object.h
../../src/knx/rf_physical_layer_cc1310.cpp
../../src/knx/rf_physical_layer_cc1310.h
../../src/knx/rf_physical_layer.h
../../src/knx/router_object.cpp
../../src/knx/router_object.h
../../src/knx/secure_application_layer.cpp
../../src/knx/secure_application_layer.h
../../src/knx/security_interface_object.cpp
../../src/knx/security_interface_object.h
../../src/knx/simple_map.h
../../src/knx/save_restore.h
../../src/knx/table_object.cpp
../../src/knx/table_object.h
../../src/knx/tpdu.cpp
../../src/knx/tpdu.h
../../src/knx/tpuart_data_link_layer.cpp
../../src/knx/tpuart_data_link_layer.h
../../src/knx/transport_layer.cpp
../../src/knx/transport_layer.h
../../src/knx/usb_tunnel_interface.cpp
../../src/knx/usb_tunnel_interface.h
../../src/knx_facade.cpp
../../src/knx_facade.h
../../src/cc1310_platform.cpp
../../src/knx_facade.cpp
./RTT/SEGGER_RTT_Conf.h
./RTT/SEGGER_RTT_printf.c
./RTT/SEGGER_RTT.c
./RTT/SEGGER_RTT.h
./RTT/SEGGER_RTT_ASM_ARMv7M.S
./smartrf_settings/smartrf_settings.c
./smartrf_settings/smartrf_settings.h
./CC1310_LAUNCHXL_fxns.c
./CC1310_LAUNCHXL.c
./CC1310_LAUNCHXL.h
./knx_wrapper.cpp
./knx_wrapper.h
./ccfg.c
./main_nortos.c
./startup_cc13xx_cc26xx_gcc.c
)
include_directories(
${CMAKE_CURRENT_SOURCE_DIR}
${CMAKE_CURRENT_SOURCE_DIR}/../../src
${CMAKE_CURRENT_SOURCE_DIR}/../../src/knx
${CMAKE_CURRENT_SOURCE_DIR}/RTT
${SimpleLinkCC13X0SDK_INCLUDE_DIRS}
)
add_definitions(-DMASK_VERSION=0x27B0 -Wno-unknown-pragmas)
add_executable(${PROJECT_NAME}
${${PROJECT_NAME}_SOURCES}
)
target_link_libraries(${PROJECT_NAME}
-Wl,--start-group
${SimpleLinkCC13X0SDK_drivers_cc13x0_LIBRARY}
${SimpleLinkCC13X0SDK_dpl_cc13x0_LIBRARY}
${SimpleLinkCC13X0SDK_driverlib_LIBRARY}
${SimpleLinkCC13X0SDK_rf_singleMode_cc13x0_LIBRARY}
-Wl,--end-group
gcc
m
nosys
c
)
target_compile_definitions(${PROJECT_NAME} PUBLIC -DDeviceFamily_CC13X0 -DRF_SINGLEMODE -DKNX_FLASH_SIZE=2048)