knx/examples/knx-cc1310/CC1310_LAUNCHXL_NoRTOS.lds
nanosonde 04e95b2100
Add TI code composer project files for CC1310 example (#101)
* Remove required HEAP size

* Add Code Composer Project files

* Add default debug print to UART

* Update .cproject

* Add README.md
2020-11-16 21:23:16 +01:00

204 lines
7.6 KiB
Plaintext

/*
* Copyright (c) 2017-2018, Texas Instruments Incorporated
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* * Neither the name of Texas Instruments Incorporated nor the names of
* its contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* ======== CC1310_LAUNCHXL_NoRTOS.lds ========
* Default Linker script for the Texas Instruments CC1310
*/
STACKSIZE = 4096+1024;
HEAPSIZE = 2048;
MEMORY
{
FLASH (RX) : ORIGIN = 0x00000000, LENGTH = 0x0001ffa8
/*
* Customer Configuration Area and Bootloader Backdoor configuration in
* flash, 40 bytes
*/
FLASH_CCFG (RX) : ORIGIN = 0x0001ffa8, LENGTH = 0x00000058
SRAM (RWX) : ORIGIN = 0x20000000, LENGTH = 0x00005000
}
REGION_ALIAS("REGION_TEXT", FLASH);
REGION_ALIAS("REGION_BSS", SRAM);
REGION_ALIAS("REGION_DATA", SRAM);
REGION_ALIAS("REGION_STACK", SRAM);
REGION_ALIAS("REGION_HEAP", SRAM);
REGION_ALIAS("REGION_ARM_EXIDX", FLASH);
REGION_ALIAS("REGION_ARM_EXTAB", FLASH);
SECTIONS {
PROVIDE (_resetVecs_base_address =
DEFINED(_resetVecs_base_address) ? _resetVecs_base_address : 0x0);
.resetVecs (_resetVecs_base_address) : AT (_resetVecs_base_address) {
KEEP (*(.resetVecs))
} > REGION_TEXT
.ramVecs (NOLOAD) : ALIGN(1024){
KEEP (*(.ramVecs))
} > REGION_DATA
/*
* UDMACC26XX_CONFIG_BASE below must match UDMACC26XX_CONFIG_BASE defined
* by ti/drivers/dma/UDMACC26XX.h
* The user is allowed to change UDMACC26XX_CONFIG_BASE to move it away from
* the default address 0x2000_0400, but remember it must be 1024 bytes aligned.
*/
UDMACC26XX_CONFIG_BASE = 0x20000400;
/*
* Define absolute addresses for the DMA channels.
* DMA channels must always be allocated at a fixed offset from the DMA base address.
* --------- DO NOT MODIFY -----------
*/
DMA_SPI0_RX_CONTROL_TABLE_ENTRY_ADDRESS = (UDMACC26XX_CONFIG_BASE + 0x30);
DMA_SPI0_TX_CONTROL_TABLE_ENTRY_ADDRESS = (UDMACC26XX_CONFIG_BASE + 0x40);
DMA_ADC_PRI_CONTROL_TABLE_ENTRY_ADDRESS = (UDMACC26XX_CONFIG_BASE + 0x70);
DMA_GPT0A_PRI_CONTROL_TABLE_ENTRY_ADDRESS = (UDMACC26XX_CONFIG_BASE + 0x90);
DMA_SPI1_RX_CONTROL_TABLE_ENTRY_ADDRESS = (UDMACC26XX_CONFIG_BASE + 0x100);
DMA_SPI1_TX_CONTROL_TABLE_ENTRY_ADDRESS = (UDMACC26XX_CONFIG_BASE + 0x110);
DMA_ADC_ALT_CONTROL_TABLE_ENTRY_ADDRESS = (UDMACC26XX_CONFIG_BASE + 0x270);
DMA_GPT0A_ALT_CONTROL_TABLE_ENTRY_ADDRESS = (UDMACC26XX_CONFIG_BASE + 0x290);
/*
* Allocate SPI0, SPI1, ADC, and GPTimer0 DMA descriptors at absolute addresses.
* --------- DO NOT MODIFY -----------
*/
UDMACC26XX_dmaSpi0RxControlTableEntry_is_placed = 0;
.dmaSpi0RxControlTableEntry DMA_SPI0_RX_CONTROL_TABLE_ENTRY_ADDRESS (NOLOAD) : AT (DMA_SPI0_RX_CONTROL_TABLE_ENTRY_ADDRESS) {*(.dmaSpi0RxControlTableEntry)} > REGION_DATA
UDMACC26XX_dmaSpi0TxControlTableEntry_is_placed = 0;
.dmaSpi0TxControlTableEntry DMA_SPI0_TX_CONTROL_TABLE_ENTRY_ADDRESS (NOLOAD) : AT (DMA_SPI0_TX_CONTROL_TABLE_ENTRY_ADDRESS) {*(.dmaSpi0TxControlTableEntry)} > REGION_DATA
UDMACC26XX_dmaADCPriControlTableEntry_is_placed = 0;
.dmaADCPriControlTableEntry DMA_ADC_PRI_CONTROL_TABLE_ENTRY_ADDRESS (NOLOAD) : AT (DMA_ADC_PRI_CONTROL_TABLE_ENTRY_ADDRESS) {*(.dmaADCPriControlTableEntry)} > REGION_DATA
UDMACC26XX_dmaGPT0APriControlTableEntry_is_placed = 0;
.dmaGPT0APriControlTableEntry DMA_GPT0A_PRI_CONTROL_TABLE_ENTRY_ADDRESS (NOLOAD) : AT (DMA_GPT0A_PRI_CONTROL_TABLE_ENTRY_ADDRESS) {*(.dmaGPT0APriControlTableEntry)} > REGION_DATA
UDMACC26XX_dmaSpi1RxControlTableEntry_is_placed = 0;
.dmaSpi1RxControlTableEntry DMA_SPI1_RX_CONTROL_TABLE_ENTRY_ADDRESS (NOLOAD) : AT (DMA_SPI1_RX_CONTROL_TABLE_ENTRY_ADDRESS) {*(.dmaSpi1RxControlTableEntry)} > REGION_DATA
UDMACC26XX_dmaSpi1TxControlTableEntry_is_placed = 0;
.dmaSpi1TxControlTableEntry DMA_SPI1_TX_CONTROL_TABLE_ENTRY_ADDRESS (NOLOAD) : AT (DMA_SPI1_TX_CONTROL_TABLE_ENTRY_ADDRESS) {*(.dmaSpi1TxControlTableEntry)} > REGION_DATA
UDMACC26XX_dmaADCAltControlTableEntry_is_placed = 0;
.dmaADCAltControlTableEntry DMA_ADC_ALT_CONTROL_TABLE_ENTRY_ADDRESS (NOLOAD) : AT (DMA_ADC_ALT_CONTROL_TABLE_ENTRY_ADDRESS) {*(.dmaADCAltControlTableEntry)} > REGION_DATA
UDMACC26XX_dmaGPT0AAltControlTableEntry_is_placed = 0;
.dmaGPT0AAltControlTableEntry DMA_GPT0A_ALT_CONTROL_TABLE_ENTRY_ADDRESS (NOLOAD) : AT (DMA_GPT0A_ALT_CONTROL_TABLE_ENTRY_ADDRESS) {*(.dmaGPT0AAltControlTableEntry)} > REGION_DATA
.text : {
CREATE_OBJECT_SYMBOLS
*(.text)
*(.text.*)
. = ALIGN(0x4);
KEEP (*(.ctors))
. = ALIGN(0x4);
KEEP (*(.dtors))
. = ALIGN(0x4);
__init_array_start = .;
KEEP (*(.init_array*))
__init_array_end = .;
*(.init)
*(.fini*)
} > REGION_TEXT AT> REGION_TEXT
PROVIDE (__etext = .);
PROVIDE (_etext = .);
PROVIDE (etext = .);
.rodata : {
*(.rodata)
*(.rodata.*)
} > REGION_TEXT AT> REGION_TEXT
.data : ALIGN(4) {
__data_load__ = LOADADDR (.data);
__data_start__ = .;
*(.data)
*(.data.*)
. = ALIGN (4);
__data_end__ = .;
} > REGION_DATA AT> REGION_TEXT
.ARM.exidx : {
__exidx_start = .;
*(.ARM.exidx* .gnu.linkonce.armexidx.*)
__exidx_end = .;
} > REGION_ARM_EXIDX AT> REGION_ARM_EXIDX
.ARM.extab : {
*(.ARM.extab* .gnu.linkonce.armextab.*)
} > REGION_ARM_EXTAB AT> REGION_ARM_EXTAB
.nvs (NOLOAD) : ALIGN(0x1000) {
*(.nvs)
} > REGION_TEXT
.ccfg : {
KEEP (*(.ccfg))
} > FLASH_CCFG AT> FLASH_CCFG
.bss : {
__bss_start__ = .;
*(.shbss)
*(.bss)
*(.bss.*)
*(COMMON)
. = ALIGN (4);
__bss_end__ = .;
} > REGION_BSS AT> REGION_BSS
.heap : {
__heap_start__ = .;
end = __heap_start__;
_end = end;
__end = end;
. = . + HEAPSIZE;
KEEP(*(.heap))
__heap_end__ = .;
__HeapLimit = __heap_end__;
} > REGION_HEAP AT> REGION_HEAP
.stack (NOLOAD) : ALIGN(0x8) {
_stack = .;
__stack = .;
KEEP(*(.stack))
. += STACKSIZE;
_stack_end = .;
__stack_end = .;
} > REGION_STACK AT> REGION_STACK
}