knx/examples/knx-bme680/knx-bme680.ino
2019-06-02 01:55:26 +02:00

253 lines
9.0 KiB
C++

#include <bsec.h>
#include <knx.h>
#ifdef ARDUINO_ARCH_ESP8266
#include <WiFiManager.h>
#endif
// create named references for easy access to group objects
#define goRawTemperature knx.getGroupObject(1)
#define goPressure knx.getGroupObject(2)
#define goRawHumidity knx.getGroupObject(3)
#define goGasResistance knx.getGroupObject(4)
#define goIaqEstimate knx.getGroupObject(5)
#define goIaqAccurace knx.getGroupObject(6)
#define goTemperature knx.getGroupObject(7)
#define goHumidity knx.getGroupObject(8)
#define goTriggerSample knx.getGroupObject(9)
#define goCo2Ppm knx.getGroupObject(10)
#define STATE_SAVE_PERIOD UINT32_C(360 * 60 * 1000) // 360 minutes - 4 times a day
// Helper functions declarations
void checkIaqSensorStatus(void);
void errLeds(void);
uint8_t* saveBme680State(uint8_t* buffer);
uint8_t* loadBme680State(uint8_t* buffer);
void triggerCallback(GroupObject& go);
void updateState();
// from generic_33v_3s_28d
const uint8_t bsec_config_iaq[454] =
{ 1, 7, 4, 1, 61, 0, 0, 0, 0, 0, 0, 0, 174, 1, 0, 0, 48, 0, 1, 0, 137, 65, 0, 63, 205, 204, 204, 62, 0, 0, 64, 63, 205, 204, 204, 62, 0, 0, 225, 68, 0, 168, 19, 73, 64, 49, 119, 76, 0, 0, 0, 0, 0, 80, 5, 95, 0, 0, 0, 0, 0, 0, 0, 0, 28, 0, 2, 0, 0, 244, 1, 225, 0, 25, 0, 0, 128, 64, 0, 0, 32, 65, 144, 1, 0, 0, 112, 65, 0, 0, 0, 63, 16, 0, 3, 0, 10, 215, 163, 60, 10, 215, 35, 59, 10, 215, 35, 59, 9, 0, 5, 0, 0, 0, 0, 0, 1, 88, 0, 9, 0, 229, 208, 34, 62, 0, 0, 0, 0, 0, 0, 0, 0, 218, 27, 156, 62, 225, 11, 67, 64, 0, 0, 160, 64, 0, 0, 0, 0, 0, 0, 0, 0, 94, 75, 72, 189, 93, 254, 159, 64, 66, 62, 160, 191, 0, 0, 0, 0, 0, 0, 0, 0, 33, 31, 180, 190, 138, 176, 97, 64, 65, 241, 99, 190, 0, 0, 0, 0, 0, 0, 0, 0, 167, 121, 71, 61, 165, 189, 41, 192, 184, 30, 189, 64, 12, 0, 10, 0, 0, 0, 0, 0, 0, 0, 0, 0, 229, 0, 254, 0, 2, 1, 5, 48, 117, 100, 0, 44, 1, 112, 23, 151, 7, 132, 3, 197, 0, 92, 4, 144, 1, 64, 1, 64, 1, 144, 1, 48, 117, 48, 117, 48, 117, 48, 117, 100, 0, 100, 0, 100, 0, 48, 117, 48, 117, 48, 117, 100, 0, 100, 0, 48, 117, 48, 117, 100, 0, 100, 0, 100, 0, 100, 0, 48, 117, 48, 117, 48, 117, 100, 0, 100, 0, 100, 0, 48, 117, 48, 117, 100, 0, 100, 0, 44, 1, 44, 1, 44, 1, 44, 1, 44, 1, 44, 1, 44, 1, 44, 1, 44, 1, 44, 1, 44, 1, 44, 1, 44, 1, 44, 1, 8, 7, 8, 7, 8, 7, 8, 7, 8, 7, 8, 7, 8, 7, 8, 7, 8, 7, 8, 7, 8, 7, 8, 7, 8, 7, 8, 7, 112, 23, 112, 23, 112, 23, 112, 23, 112, 23, 112, 23, 112, 23, 112, 23, 112, 23, 112, 23, 112, 23, 112, 23, 112, 23, 112, 23, 255, 255, 255, 255, 255, 255, 255, 255, 220, 5, 220, 5, 220, 5, 255, 255, 255, 255, 255, 255, 220, 5, 220, 5, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 44, 1, 0, 0, 0, 0, 50, 91, 0, 0 };
// Create an object of the class Bsec
Bsec iaqSensor;
uint16_t stateUpdateCounter = 0;
uint8_t sendCounter = 0;
uint32_t cyclSend = 0;
bool trigger = false;
// Entry point for the example
void setup(void)
{
Serial.begin(115200);
delay(5000);
Serial.println("start");
#ifdef ARDUINO_ARCH_ESP8266
WiFiManager wifiManager;
wifiManager.autoConnect("knx-bme680");
#endif
// read adress table, association table, groupobject table and parameters from eeprom
knx.readMemory();
// register callback for reset GO
if(knx.configured())
goTriggerSample.callback(triggerCallback);
iaqSensor.begin(BME680_I2C_ADDR_SECONDARY, Wire);
checkIaqSensorStatus();
iaqSensor.setConfig(bsec_config_iaq);
checkIaqSensorStatus();
bsec_virtual_sensor_t sensorList[] = {
BSEC_OUTPUT_RAW_TEMPERATURE,
BSEC_OUTPUT_RAW_PRESSURE,
BSEC_OUTPUT_RAW_HUMIDITY,
BSEC_OUTPUT_RAW_GAS,
BSEC_OUTPUT_IAQ,
BSEC_OUTPUT_SENSOR_HEAT_COMPENSATED_TEMPERATURE,
BSEC_OUTPUT_SENSOR_HEAT_COMPENSATED_HUMIDITY,
BSEC_OUTPUT_CO2_EQUIVALENT
};
knx.setSaveCallback(saveBme680State);
knx.setRestoreCallback(loadBme680State);
if (knx.configured())
{
cyclSend = knx.paramInt(0);
Serial.print("Zykl. send:");
Serial.println(cyclSend);
}
// start the framework. Will get wifi first.
knx.start();
iaqSensor.updateSubscription(sensorList, 7, BSEC_SAMPLE_RATE_LP);
checkIaqSensorStatus();
String output = "Timestamp [ms], raw temperature [°C], pressure [hPa], raw relative humidity [%], gas [Ohm], IAQ, IAQ accuracy, temperature [°C], relative humidity [%], CO2";
Serial.println(output);
}
// Function that is looped forever
void loop(void)
{
// don't delay here to much. Otherwise you might lose packages or mess up the timing with ETS
knx.loop();
// only run the application code if the device was configured with ETS
if(!knx.configured())
return;
if (iaqSensor.run())
{
String output = String(millis());
output += ", " + String(iaqSensor.rawTemperature);
output += ", " + String(iaqSensor.pressure);
output += ", " + String(iaqSensor.rawHumidity);
output += ", " + String(iaqSensor.gasResistance);
output += ", " + String(iaqSensor.iaqEstimate);
output += ", " + String(iaqSensor.iaqAccuracy);
output += ", " + String(iaqSensor.temperature);
output += ", " + String(iaqSensor.humidity);
output += ", " + String(iaqSensor.co2Equivalent);
output += ", " + String(iaqSensor.co2Accuracy);
Serial.println(output);
updateState();
if (sendCounter++ == cyclSend || trigger)
{
sendCounter = 0;
trigger = false;
goRawTemperature.objectWrite(iaqSensor.rawTemperature);
goPressure.objectWrite(iaqSensor.pressure);
goRawHumidity.objectWrite(iaqSensor.rawHumidity);
goGasResistance.objectWrite(iaqSensor.gasResistance);
goIaqEstimate.objectWrite(iaqSensor.iaqEstimate);
goIaqAccurace.objectWrite(iaqSensor.iaqAccuracy);
goTemperature.objectWrite(iaqSensor.temperature);
goHumidity.objectWrite(iaqSensor.humidity);
goCo2Ppm.objectWrite(iaqSensor.co2Equivalent);
}
}
else {
checkIaqSensorStatus();
}
}
// Helper function definitions
void checkIaqSensorStatus(void)
{
if (iaqSensor.status != BSEC_OK) {
if (iaqSensor.status < BSEC_OK) {
String output = "BSEC error code : " + String(iaqSensor.status);
Serial.println(output);
for (;;)
errLeds(); /* Halt in case of failure */
}
else {
String output = "BSEC warning code : " + String(iaqSensor.status);
Serial.println(output);
}
}
if (iaqSensor.bme680Status != BME680_OK) {
if (iaqSensor.bme680Status < BME680_OK) {
String output = "BME680 error code : " + String(iaqSensor.bme680Status);
Serial.println(output);
for (;;)
errLeds(); /* Halt in case of failure */
}
else {
String output = "BME680 warning code : " + String(iaqSensor.bme680Status);
Serial.println(output);
}
}
}
void errLeds(void)
{
pinMode(LED_BUILTIN, OUTPUT);
digitalWrite(LED_BUILTIN, HIGH);
delay(100);
digitalWrite(LED_BUILTIN, LOW);
delay(100);
}
uint8_t* loadBme680State(uint8_t* buffer)
{
// Existing state in EEPROM
Serial.println("Reading state from EEPROM");
for (uint8_t i = 0; i < BSEC_MAX_STATE_BLOB_SIZE; i++) {
Serial.println(buffer[i], HEX);
}
iaqSensor.setState(buffer);
checkIaqSensorStatus();
return buffer + BSEC_MAX_STATE_BLOB_SIZE;
}
uint8_t* saveBme680State(uint8_t* buffer)
{
iaqSensor.getState(buffer);
checkIaqSensorStatus();
Serial.println("Writing state to EEPROM");
for (uint8_t i = 0; i < BSEC_MAX_STATE_BLOB_SIZE; i++) {
Serial.println(buffer[i], HEX);
}
return buffer + BSEC_MAX_STATE_BLOB_SIZE;
}
void updateState(void)
{
bool update = false;
if (stateUpdateCounter == 0) {
/* First state update when IAQ accuracy is >= 1 */
if (iaqSensor.iaqAccuracy >= 3) {
update = true;
stateUpdateCounter++;
}
}
else {
/* Update every STATE_SAVE_PERIOD minutes */
if ((stateUpdateCounter * STATE_SAVE_PERIOD) < millis()) {
update = true;
stateUpdateCounter++;
}
}
if (update) {
knx.writeMemory();
}
}
// callback from trigger-GO
void triggerCallback(GroupObject& go)
{
Serial.println("trigger");
Serial.println(go.objectReadBool());
if (!go.objectReadBool())
return;
trigger = true;
/* We call bsec_update_subscription() in order to instruct BSEC to perform an extra measurement at the next
possible time slot
*/
Serial.println("Triggering ULP plus.");
bsec_virtual_sensor_t sensorList[] = {
BSEC_OUTPUT_IAQ, BSEC_OUTPUT_CO2_EQUIVALENT
};
iaqSensor.updateSubscription(sensorList, 1, BSEC_SAMPLE_RATE_ULP_MEASUREMENT_ON_DEMAND);
checkIaqSensorStatus();
}