mirror of
https://github.com/thelsing/knx.git
synced 2024-10-20 20:07:45 +02:00
d90843ba45
* Initial commit * Clean up * Remove display code * Change cmake build * Add SimpleLink SDK for CC13xx/CC26xx as submodule * Remove commented line from build.sh * Working build * Remove SDK submodule * Squashed 'examples/knx-cc1310/coresdk_cc13xx_cc26xx/' content from commit 0d78d32 git-subtree-dir: examples/knx-cc1310/coresdk_cc13xx_cc26xx git-subtree-split: 0d78d3280357416a5c0388148cda13717c9ffaa5 * Add more comments and enable Power_idleFunc() for NoRTOS variant. Internal SDK driver functions which have to wait for something will cause Power_idleFunc to be called instead of doing busy wait. * Move CC1310 platform init around * Optimize a bit more in debug build config as the binary does not fit into 128Kb flash otherwise. * Explicitly list each source/header file in build config. Use linker group to resolve circular dependencies. * Ignore vscode settings.json * Increase stacks size * Only compile CC1310 source code if #define DeviceFamily_CC13X0 * initial commit of CC1310 RF driver with first working RX version * Better handling of buttonUp() across platforms * Start cleanup * continue cleanup * Fix bau2920 compilation * Continue cleanup * Fix compilation in other examples * Fix compilation * htons() and ntohs() only for SAMD and STM32, but not for Linux and ESP8266 and ESP32 * htons(9 and ntohs() needed for CC13x0 * Continue cleanup * Add CC1310 platform to CI * Fix CI * Use more recent toolchain from ARM * Fix travis * Use Ubuntu Focal * Fix toolchain for travis * Fix package name * Fix toolchain * Add libstdc++-dev package * Add newlib packages * Remove commented commands from CI * Fix travis * Fix compilation of knxPython * Clean up linefeeds * Fix RX callback * Move RF CRC16-DNP to bits.cpp * Fix TX * Optimization: do not calc CRC for block1 again in rf_data_link_layer * Make newline optional in printHex * Cleanup. First working version: ETS5 programming of individual address via KNX/RF coupler. * Use LEDs and Buttons to control ProgMode and Flash Erase * Remove settings.json (VScode) * Add README.md * Update README.md * Update README.md * Fix typo
75 lines
3.2 KiB
C
75 lines
3.2 KiB
C
/*
|
|
* Copyright (c) 2015-2017, Texas Instruments Incorporated
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* * Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
*
|
|
* * Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* * Neither the name of Texas Instruments Incorporated nor the names of
|
|
* its contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
|
|
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
|
|
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
|
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
|
|
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
|
|
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
|
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
|
|
* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
|
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* ======== ccfg.c ========
|
|
* Customer Configuration for CC26xx and CC13xx devices. This file is used to
|
|
* configure Boot ROM, start-up code, and SW radio behaviour.
|
|
*
|
|
* By default, driverlib startup_files/ccfg.c settings are used. However, if
|
|
* changes are required there are two means to do so:
|
|
*
|
|
* 1. Remove this file and copy driverlib's startup_files/ccfg.c file in
|
|
* its place. Make all changes to the file. Changes made are local to
|
|
* the project and will not affect other projects.
|
|
*
|
|
* 2. Perform changes to driverlib startup_files/ccfg.c file. Changes
|
|
* made to this file will be applied to all projects. This file must
|
|
* remain unmodified.
|
|
*/
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/**
|
|
* \name ROM Bootloader configuration
|
|
*
|
|
* Enable/Disable the ROM bootloader in your image, if the board supports it.
|
|
* Look in Board.h to choose the DIO and corresponding level that will cause
|
|
* the chip to enter bootloader mode.
|
|
* @{
|
|
*/
|
|
#ifndef CCFG_CONF_ROM_BOOTLOADER_ENABLE
|
|
#define CCFG_CONF_ROM_BOOTLOADER_ENABLE 0
|
|
#endif
|
|
|
|
#if CCFG_CONF_ROM_BOOTLOADER_ENABLE
|
|
#define SET_CCFG_BL_CONFIG_BOOTLOADER_ENABLE 0xC5
|
|
#define SET_CCFG_BL_CONFIG_BL_LEVEL 0x00
|
|
#if defined(CCFG_CONF_BL_PIN_NUMBER)
|
|
#define SET_CCFG_BL_CONFIG_BL_PIN_NUMBER CCFG_CONF_BL_PIN_NUMBER
|
|
#endif
|
|
#define SET_CCFG_BL_CONFIG_BL_ENABLE 0xC5
|
|
#endif /* CCFG_CONF_ROM_BOOTLOADER_ENABLE */
|
|
/** @} */
|
|
|
|
#include <ti/devices/DeviceFamily.h>
|
|
#include DeviceFamily_constructPath(startup_files/ccfg.c)
|