mirror of
https://github.com/thelsing/knx.git
synced 2024-10-20 20:07:45 +02:00
265 lines
9.4 KiB
C++
265 lines
9.4 KiB
C++
// used version: BSEC_1.4.7.3_Generic_Release_20190410
|
|
#include <bsec.h>
|
|
#include <knx.h>
|
|
#ifdef ARDUINO_ARCH_ESP8266
|
|
#include <WiFiManager.h>
|
|
#endif
|
|
|
|
|
|
// create named references for easy access to group objects
|
|
#define goRawTemperature knx.getGroupObject(1)
|
|
#define goPressure knx.getGroupObject(2)
|
|
#define goRawHumidity knx.getGroupObject(3)
|
|
#define goGasResistance knx.getGroupObject(4)
|
|
#define goIaqEstimate knx.getGroupObject(5)
|
|
#define goIaqAccurace knx.getGroupObject(6)
|
|
#define goTemperature knx.getGroupObject(7)
|
|
#define goHumidity knx.getGroupObject(8)
|
|
#define goTriggerSample knx.getGroupObject(9)
|
|
#define goCo2Ppm knx.getGroupObject(10)
|
|
|
|
#define STATE_SAVE_PERIOD UINT32_C(360 * 60 * 1000) // 360 minutes - 4 times a day
|
|
|
|
// Helper functions declarations
|
|
void checkIaqSensorStatus(void);
|
|
void errLeds(void);
|
|
uint8_t* saveBme680State(uint8_t* buffer);
|
|
uint8_t* loadBme680State(uint8_t* buffer);
|
|
void triggerCallback(GroupObject& go);
|
|
void updateState();
|
|
|
|
// from generic_33v_3s_28d
|
|
const uint8_t bsec_config_iaq[454] =
|
|
{3, 7, 4, 1, 61, 0, 0, 0, 0, 0, 0, 0, 174, 1, 0, 0, 48, 0, 1, 0, 0, 168, 19, 73, 64, 49, 119, 76, 0, 0, 225, 68, 137, 65, 0, 63, 205, 204, 204, 62, 0, 0, 64, 63, 205, 204, 204, 62, 0, 0, 0, 0, 0, 80, 5, 95, 0, 0, 0, 0, 0, 0, 0, 0, 28, 0, 2, 0, 0, 244, 1, 225, 0, 25, 0, 0, 128, 64, 0, 0, 32, 65, 144, 1, 0, 0, 112, 65, 0, 0, 0, 63, 16, 0, 3, 0, 10, 215, 163, 60, 10, 215, 35, 59, 10, 215, 35, 59, 9, 0, 5, 0, 0, 0, 0, 0, 1, 88, 0, 9, 0, 7, 240, 150, 61, 0, 0, 0, 0, 0, 0, 0, 0, 28, 124, 225, 61, 52, 128, 215, 63, 0, 0, 160, 64, 0, 0, 0, 0, 0, 0, 0, 0, 205, 204, 12, 62, 103, 213, 39, 62, 230, 63, 76, 192, 0, 0, 0, 0, 0, 0, 0, 0, 145, 237, 60, 191, 251, 58, 64, 63, 177, 80, 131, 64, 0, 0, 0, 0, 0, 0, 0, 0, 93, 254, 227, 62, 54, 60, 133, 191, 0, 0, 64, 64, 12, 0, 10, 0, 0, 0, 0, 0, 0, 0, 0, 0, 229, 0, 254, 0, 2, 1, 5, 48, 117, 100, 0, 44, 1, 112, 23, 151, 7, 132, 3, 197, 0, 92, 4, 144, 1, 64, 1, 64, 1, 144, 1, 48, 117, 48, 117, 48, 117, 48, 117, 100, 0, 100, 0, 100, 0, 48, 117, 48, 117, 48, 117, 100, 0, 100, 0, 48, 117, 48, 117, 100, 0, 100, 0, 100, 0, 100, 0, 48, 117, 48, 117, 48, 117, 100, 0, 100, 0, 100, 0, 48, 117, 48, 117, 100, 0, 100, 0, 44, 1, 44, 1, 44, 1, 44, 1, 44, 1, 44, 1, 44, 1, 44, 1, 44, 1, 44, 1, 44, 1, 44, 1, 44, 1, 44, 1, 8, 7, 8, 7, 8, 7, 8, 7, 8, 7, 8, 7, 8, 7, 8, 7, 8, 7, 8, 7, 8, 7, 8, 7, 8, 7, 8, 7, 112, 23, 112, 23, 112, 23, 112, 23, 112, 23, 112, 23, 112, 23, 112, 23, 112, 23, 112, 23, 112, 23, 112, 23, 112, 23, 112, 23, 255, 255, 255, 255, 255, 255, 255, 255, 220, 5, 220, 5, 220, 5, 255, 255, 255, 255, 255, 255, 220, 5, 220, 5, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 44, 1, 0, 0, 0, 0, 96, 159, 0, 0};
|
|
|
|
// Create an object of the class Bsec
|
|
Bsec iaqSensor;
|
|
uint16_t stateUpdateCounter = 0;
|
|
uint8_t sendCounter = 0;
|
|
uint32_t cyclSend = 0;
|
|
bool trigger = false;
|
|
|
|
// Entry point for the example
|
|
void setup(void)
|
|
{
|
|
Serial.begin(115200);
|
|
delay(5000);
|
|
Serial.println("start");
|
|
|
|
#ifdef ARDUINO_ARCH_ESP8266
|
|
WiFiManager wifiManager;
|
|
wifiManager.autoConnect("knx-bme680");
|
|
#endif
|
|
|
|
// read adress table, association table, groupobject table and parameters from eeprom
|
|
knx.readMemory();
|
|
|
|
// register callback for reset GO
|
|
if(knx.configured())
|
|
goTriggerSample.callback(triggerCallback);
|
|
|
|
|
|
iaqSensor.begin(BME680_I2C_ADDR_SECONDARY, Wire);
|
|
checkIaqSensorStatus();
|
|
|
|
iaqSensor.setConfig(bsec_config_iaq);
|
|
checkIaqSensorStatus();
|
|
|
|
bsec_virtual_sensor_t sensorList[] = {
|
|
BSEC_OUTPUT_RAW_TEMPERATURE,
|
|
BSEC_OUTPUT_RAW_PRESSURE,
|
|
BSEC_OUTPUT_RAW_HUMIDITY,
|
|
BSEC_OUTPUT_RAW_GAS,
|
|
BSEC_OUTPUT_IAQ,
|
|
BSEC_OUTPUT_SENSOR_HEAT_COMPENSATED_TEMPERATURE,
|
|
BSEC_OUTPUT_SENSOR_HEAT_COMPENSATED_HUMIDITY,
|
|
BSEC_OUTPUT_CO2_EQUIVALENT
|
|
};
|
|
|
|
knx.setSaveCallback(saveBme680State);
|
|
knx.setRestoreCallback(loadBme680State);
|
|
|
|
if (knx.configured())
|
|
{
|
|
cyclSend = knx.paramInt(0);
|
|
Serial.print("Zykl. send:");
|
|
Serial.println(cyclSend);
|
|
goRawTemperature.dataPointType(Dpt(9, 0));
|
|
goPressure.dataPointType(Dpt(9, 0));
|
|
goRawHumidity.dataPointType(Dpt(9, 0));
|
|
goGasResistance.dataPointType(Dpt(9, 0));
|
|
goIaqEstimate.dataPointType(Dpt(9, 0));
|
|
goIaqAccurace.dataPointType(Dpt(9, 0));
|
|
goTemperature.dataPointType(Dpt(9, 0));
|
|
goHumidity.dataPointType(Dpt(9, 0));
|
|
goCo2Ppm.dataPointType(Dpt(9, 0));
|
|
goTriggerSample.dataPointType(Dpt(1, 0));
|
|
}
|
|
|
|
// start the framework. Will get wifi first.
|
|
knx.start();
|
|
|
|
iaqSensor.updateSubscription(sensorList, 7, BSEC_SAMPLE_RATE_LP);
|
|
checkIaqSensorStatus();
|
|
String output = "Timestamp [ms], raw temperature [°C], pressure [hPa], raw relative humidity [%], gas [Ohm], IAQ, IAQ accuracy, temperature [°C], relative humidity [%], CO2";
|
|
Serial.println(output);
|
|
}
|
|
|
|
// Function that is looped forever
|
|
void loop(void)
|
|
{
|
|
// don't delay here to much. Otherwise you might lose packages or mess up the timing with ETS
|
|
knx.loop();
|
|
|
|
// only run the application code if the device was configured with ETS
|
|
if(!knx.configured())
|
|
return;
|
|
|
|
if (iaqSensor.run())
|
|
{
|
|
String output = String(millis());
|
|
|
|
output += ", " + String(iaqSensor.rawTemperature);
|
|
output += ", " + String(iaqSensor.pressure);
|
|
output += ", " + String(iaqSensor.rawHumidity);
|
|
output += ", " + String(iaqSensor.gasResistance);
|
|
output += ", " + String(iaqSensor.iaq);
|
|
output += ", " + String(iaqSensor.iaqAccuracy);
|
|
output += ", " + String(iaqSensor.temperature);
|
|
output += ", " + String(iaqSensor.humidity);
|
|
output += ", " + String(iaqSensor.co2Equivalent);
|
|
output += ", " + String(iaqSensor.co2Accuracy);
|
|
|
|
Serial.println(output);
|
|
updateState();
|
|
|
|
if (sendCounter++ == cyclSend || trigger)
|
|
{
|
|
sendCounter = 0;
|
|
trigger = false;
|
|
|
|
goRawTemperature.value(iaqSensor.rawTemperature);
|
|
goPressure.value(iaqSensor.pressure);
|
|
goRawHumidity.value(iaqSensor.rawHumidity);
|
|
goGasResistance.value(iaqSensor.gasResistance);
|
|
goIaqEstimate.value(iaqSensor.iaq);
|
|
goIaqAccurace.value(iaqSensor.iaqAccuracy);
|
|
goTemperature.value(iaqSensor.temperature);
|
|
goHumidity.value(iaqSensor.humidity);
|
|
goCo2Ppm.value(iaqSensor.co2Equivalent);
|
|
}
|
|
}
|
|
else {
|
|
checkIaqSensorStatus();
|
|
}
|
|
}
|
|
|
|
// Helper function definitions
|
|
void checkIaqSensorStatus(void)
|
|
{
|
|
if (iaqSensor.status != BSEC_OK) {
|
|
if (iaqSensor.status < BSEC_OK) {
|
|
String output = "BSEC error code : " + String(iaqSensor.status);
|
|
Serial.println(output);
|
|
for (;;)
|
|
errLeds(); /* Halt in case of failure */
|
|
}
|
|
else {
|
|
String output = "BSEC warning code : " + String(iaqSensor.status);
|
|
Serial.println(output);
|
|
}
|
|
}
|
|
|
|
if (iaqSensor.bme680Status != BME680_OK) {
|
|
if (iaqSensor.bme680Status < BME680_OK) {
|
|
String output = "BME680 error code : " + String(iaqSensor.bme680Status);
|
|
Serial.println(output);
|
|
for (;;)
|
|
errLeds(); /* Halt in case of failure */
|
|
}
|
|
else {
|
|
String output = "BME680 warning code : " + String(iaqSensor.bme680Status);
|
|
Serial.println(output);
|
|
}
|
|
}
|
|
}
|
|
|
|
void errLeds(void)
|
|
{
|
|
pinMode(LED_BUILTIN, OUTPUT);
|
|
digitalWrite(LED_BUILTIN, HIGH);
|
|
delay(100);
|
|
digitalWrite(LED_BUILTIN, LOW);
|
|
delay(100);
|
|
}
|
|
|
|
uint8_t* loadBme680State(uint8_t* buffer)
|
|
{
|
|
// Existing state in EEPROM
|
|
Serial.println("Reading state from EEPROM");
|
|
|
|
for (uint8_t i = 0; i < BSEC_MAX_STATE_BLOB_SIZE; i++) {
|
|
Serial.println(buffer[i], HEX);
|
|
}
|
|
|
|
iaqSensor.setState(buffer);
|
|
checkIaqSensorStatus();
|
|
return buffer + BSEC_MAX_STATE_BLOB_SIZE;
|
|
}
|
|
|
|
uint8_t* saveBme680State(uint8_t* buffer)
|
|
{
|
|
iaqSensor.getState(buffer);
|
|
checkIaqSensorStatus();
|
|
|
|
Serial.println("Writing state to EEPROM");
|
|
|
|
for (uint8_t i = 0; i < BSEC_MAX_STATE_BLOB_SIZE; i++) {
|
|
Serial.println(buffer[i], HEX);
|
|
}
|
|
return buffer + BSEC_MAX_STATE_BLOB_SIZE;
|
|
}
|
|
|
|
void updateState(void)
|
|
{
|
|
bool update = false;
|
|
if (stateUpdateCounter == 0) {
|
|
/* First state update when IAQ accuracy is >= 1 */
|
|
if (iaqSensor.iaqAccuracy >= 3) {
|
|
update = true;
|
|
stateUpdateCounter++;
|
|
}
|
|
}
|
|
else {
|
|
/* Update every STATE_SAVE_PERIOD minutes */
|
|
if ((stateUpdateCounter * STATE_SAVE_PERIOD) < millis()) {
|
|
update = true;
|
|
stateUpdateCounter++;
|
|
}
|
|
}
|
|
|
|
if (update) {
|
|
knx.writeMemory();
|
|
}
|
|
}
|
|
|
|
// callback from trigger-GO
|
|
void triggerCallback(GroupObject& go)
|
|
{
|
|
Serial.println("trigger");
|
|
Serial.println(go.value().boolValue());
|
|
if (!go.value().boolValue())
|
|
return;
|
|
|
|
trigger = true;
|
|
/* We call bsec_update_subscription() in order to instruct BSEC to perform an extra measurement at the next
|
|
possible time slot
|
|
*/
|
|
Serial.println("Triggering ULP plus.");
|
|
bsec_virtual_sensor_t sensorList[] = {
|
|
BSEC_OUTPUT_IAQ, BSEC_OUTPUT_CO2_EQUIVALENT
|
|
};
|
|
|
|
iaqSensor.updateSubscription(sensorList, 1, BSEC_SAMPLE_RATE_ULP_MEASUREMENT_ON_DEMAND);
|
|
checkIaqSensorStatus();
|
|
} |