mirror of
https://github.com/thelsing/knx.git
synced 2024-12-23 19:09:41 +01:00
d90843ba45
* Initial commit * Clean up * Remove display code * Change cmake build * Add SimpleLink SDK for CC13xx/CC26xx as submodule * Remove commented line from build.sh * Working build * Remove SDK submodule * Squashed 'examples/knx-cc1310/coresdk_cc13xx_cc26xx/' content from commit 0d78d32 git-subtree-dir: examples/knx-cc1310/coresdk_cc13xx_cc26xx git-subtree-split: 0d78d3280357416a5c0388148cda13717c9ffaa5 * Add more comments and enable Power_idleFunc() for NoRTOS variant. Internal SDK driver functions which have to wait for something will cause Power_idleFunc to be called instead of doing busy wait. * Move CC1310 platform init around * Optimize a bit more in debug build config as the binary does not fit into 128Kb flash otherwise. * Explicitly list each source/header file in build config. Use linker group to resolve circular dependencies. * Ignore vscode settings.json * Increase stacks size * Only compile CC1310 source code if #define DeviceFamily_CC13X0 * initial commit of CC1310 RF driver with first working RX version * Better handling of buttonUp() across platforms * Start cleanup * continue cleanup * Fix bau2920 compilation * Continue cleanup * Fix compilation in other examples * Fix compilation * htons() and ntohs() only for SAMD and STM32, but not for Linux and ESP8266 and ESP32 * htons(9 and ntohs() needed for CC13x0 * Continue cleanup * Add CC1310 platform to CI * Fix CI * Use more recent toolchain from ARM * Fix travis * Use Ubuntu Focal * Fix toolchain for travis * Fix package name * Fix toolchain * Add libstdc++-dev package * Add newlib packages * Remove commented commands from CI * Fix travis * Fix compilation of knxPython * Clean up linefeeds * Fix RX callback * Move RF CRC16-DNP to bits.cpp * Fix TX * Optimization: do not calc CRC for block1 again in rf_data_link_layer * Make newline optional in printHex * Cleanup. First working version: ETS5 programming of individual address via KNX/RF coupler. * Use LEDs and Buttons to control ProgMode and Flash Erase * Remove settings.json (VScode) * Add README.md * Update README.md * Update README.md * Fix typo
242 lines
11 KiB
ArmAsm
242 lines
11 KiB
ArmAsm
/*********************************************************************
|
|
* (c) SEGGER Microcontroller GmbH *
|
|
* The Embedded Experts *
|
|
* www.segger.com *
|
|
**********************************************************************
|
|
|
|
-------------------------- END-OF-HEADER -----------------------------
|
|
|
|
File : SEGGER_RTT_ASM_ARMv7M.S
|
|
Purpose : Assembler implementation of RTT functions for ARMv7M
|
|
|
|
Additional information:
|
|
This module is written to be assembler-independent and works with
|
|
GCC and clang (Embedded Studio) and IAR.
|
|
*/
|
|
|
|
#define SEGGER_RTT_ASM // Used to control processed input from header file
|
|
#include "SEGGER_RTT.h"
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Defines, fixed
|
|
*
|
|
**********************************************************************
|
|
*/
|
|
#define _CCIAR 0
|
|
#define _CCCLANG 1
|
|
|
|
#if (defined __SES_ARM) || (defined __GNUC__) || (defined __clang__)
|
|
#define _CC_TYPE _CCCLANG
|
|
#define _PUB_SYM .global
|
|
#define _EXT_SYM .extern
|
|
#define _END .end
|
|
#define _WEAK .weak
|
|
#define _THUMB_FUNC .thumb_func
|
|
#define _THUMB_CODE .code 16
|
|
#define _WORD .word
|
|
#define _SECTION(Sect, Type, AlignExp) .section Sect ##, "ax"
|
|
#define _ALIGN(Exp) .align Exp
|
|
#define _PLACE_LITS .ltorg
|
|
#define _DATA_SECT_START
|
|
#define _C_STARTUP _start
|
|
#define _STACK_END __stack_end__
|
|
#define _RAMFUNC
|
|
//
|
|
// .text => Link to flash
|
|
// .fast => Link to RAM
|
|
// OtherSect => Usually link to RAM
|
|
// Alignment is 2^x
|
|
//
|
|
#elif defined (__IASMARM__)
|
|
#define _CC_TYPE _CCIAR
|
|
#define _PUB_SYM PUBLIC
|
|
#define _EXT_SYM EXTERN
|
|
#define _END END
|
|
#define _WEAK _WEAK
|
|
#define _THUMB_FUNC
|
|
#define _THUMB_CODE THUMB
|
|
#define _WORD DCD
|
|
#define _SECTION(Sect, Type, AlignExp) SECTION Sect ## : ## Type ## :REORDER:NOROOT ## (AlignExp)
|
|
#define _ALIGN(Exp) alignrom Exp
|
|
#define _PLACE_LITS
|
|
#define _DATA_SECT_START DATA
|
|
#define _C_STARTUP __iar_program_start
|
|
#define _STACK_END sfe(CSTACK)
|
|
#define _RAMFUNC SECTION_TYPE SHT_PROGBITS, SHF_WRITE | SHF_EXECINSTR
|
|
//
|
|
// .text => Link to flash
|
|
// .textrw => Link to RAM
|
|
// OtherSect => Usually link to RAM
|
|
// NOROOT => Allows linker to throw away the function, if not referenced
|
|
// Alignment is 2^x
|
|
//
|
|
#endif
|
|
|
|
#if (_CC_TYPE == _CCIAR)
|
|
NAME SEGGER_RTT_ASM_ARMv7M
|
|
#else
|
|
.syntax unified
|
|
#endif
|
|
|
|
#if defined (RTT_USE_ASM) && (RTT_USE_ASM == 1)
|
|
#define SHT_PROGBITS 0x1
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Public / external symbols
|
|
*
|
|
**********************************************************************
|
|
*/
|
|
|
|
_EXT_SYM __aeabi_memcpy
|
|
_EXT_SYM __aeabi_memcpy4
|
|
_EXT_SYM _SEGGER_RTT
|
|
|
|
_PUB_SYM SEGGER_RTT_ASM_WriteSkipNoLock
|
|
|
|
/*********************************************************************
|
|
*
|
|
* SEGGER_RTT_WriteSkipNoLock
|
|
*
|
|
* Function description
|
|
* Stores a specified number of characters in SEGGER RTT
|
|
* control block which is then read by the host.
|
|
* SEGGER_RTT_WriteSkipNoLock does not lock the application and
|
|
* skips all data, if the data does not fit into the buffer.
|
|
*
|
|
* Parameters
|
|
* BufferIndex Index of "Up"-buffer to be used (e.g. 0 for "Terminal").
|
|
* pBuffer Pointer to character array. Does not need to point to a \0 terminated string.
|
|
* NumBytes Number of bytes to be stored in the SEGGER RTT control block.
|
|
* MUST be > 0!!!
|
|
* This is done for performance reasons, so no initial check has do be done.
|
|
*
|
|
* Return value
|
|
* 1: Data has been copied
|
|
* 0: No space, data has not been copied
|
|
*
|
|
* Notes
|
|
* (1) If there is not enough space in the "Up"-buffer, all data is dropped.
|
|
* (2) For performance reasons this function does not call Init()
|
|
* and may only be called after RTT has been initialized.
|
|
* Either by calling SEGGER_RTT_Init() or calling another RTT API function first.
|
|
*/
|
|
_SECTION(.text, CODE, 2)
|
|
_ALIGN(2)
|
|
_THUMB_FUNC
|
|
SEGGER_RTT_ASM_WriteSkipNoLock: // unsigned SEGGER_RTT_WriteSkipNoLock(unsigned BufferIndex, const void* pData, unsigned NumBytes) {
|
|
//
|
|
// Cases:
|
|
// 1) RdOff <= WrOff => Space until wrap-around is sufficient
|
|
// 2) RdOff <= WrOff => Space after wrap-around needed (copy in 2 chunks)
|
|
// 3) RdOff < WrOff => No space in buf
|
|
// 4) RdOff > WrOff => Space is sufficient
|
|
// 5) RdOff > WrOff => No space in buf
|
|
//
|
|
// 1) is the most common case for large buffers and assuming that J-Link reads the data fast enough
|
|
//
|
|
// Register usage:
|
|
// R0 Temporary needed as RdOff, <Tmp> register later on
|
|
// R1 pData
|
|
// R2 <NumBytes>
|
|
// R3 <Tmp> register. Hold free for subroutine calls
|
|
// R4 <Rem>
|
|
// R5 pRing->pBuffer
|
|
// R6 pRing (Points to active struct SEGGER_RTT_BUFFER_DOWN)
|
|
// R7 WrOff
|
|
//
|
|
PUSH {R4-R7}
|
|
ADD R3,R0,R0, LSL #+1
|
|
LDR.W R0,=_SEGGER_RTT // pRing = &_SEGGER_RTT.aUp[BufferIndex];
|
|
ADD R0,R0,R3, LSL #+3
|
|
ADD R6,R0,#+24
|
|
LDR R0,[R6, #+16] // RdOff = pRing->RdOff;
|
|
LDR R7,[R6, #+12] // WrOff = pRing->WrOff;
|
|
LDR R5,[R6, #+4] // pRing->pBuffer
|
|
CMP R7,R0
|
|
BCC.N _CheckCase4 // if (RdOff <= WrOff) { => Case 1), 2) or 3)
|
|
//
|
|
// Handling for case 1, later on identical to case 4
|
|
//
|
|
LDR R3,[R6, #+8] // Avail = pRing->SizeOfBuffer - WrOff - 1u; => Space until wrap-around (assume 1 byte not usable for case that RdOff == 0)
|
|
SUBS R4,R3,R7 // <Rem> (Used in case we jump into case 2 afterwards)
|
|
SUBS R3,R4,#+1 // <Avail>
|
|
CMP R3,R2
|
|
BCC.N _CheckCase2 // if (Avail >= NumBytes) { => Case 1)?
|
|
_Case4:
|
|
ADDS R5,R7,R5 // pBuffer += WrOff
|
|
ADDS R0,R2,R7 // v = WrOff + NumBytes
|
|
//
|
|
// 2x unrolling for the copy loop that is used most of the time
|
|
// This is a special optimization for small SystemView packets and makes them even faster
|
|
//
|
|
_ALIGN(2)
|
|
_LoopCopyStraight: // memcpy(pRing->pBuffer + WrOff, pData, NumBytes);
|
|
LDRB R3,[R1], #+1
|
|
STRB R3,[R5], #+1 // *pDest++ = *pSrc++
|
|
SUBS R2,R2,#+1
|
|
BEQ _CSDone
|
|
LDRB R3,[R1], #+1
|
|
STRB R3,[R5], #+1 // *pDest++ = *pSrc++
|
|
SUBS R2,R2,#+1
|
|
BNE _LoopCopyStraight
|
|
_CSDone:
|
|
#if _CORE_NEEDS_DMB // Do not slow down cores that do not need a DMB instruction here
|
|
DMB // Cortex-M7 may delay memory writes and also change the order in which the writes happen. Therefore, make sure that all buffer writes are finished, before updating the <WrOff> in the struct
|
|
#endif
|
|
STR R0,[R6, #+12] // pRing->WrOff = WrOff + NumBytes;
|
|
MOVS R0,#+1
|
|
POP {R4-R7}
|
|
BX LR // Return 1
|
|
_CheckCase2:
|
|
ADDS R0,R0,R3 // Avail += RdOff; => Space incl. wrap-around
|
|
CMP R0,R2
|
|
BCC.N _Case3 // if (Avail >= NumBytes) { => Case 2? => If not, we have case 3) (does not fit)
|
|
//
|
|
// Handling for case 2
|
|
//
|
|
ADDS R0,R7,R5 // v = pRing->pBuffer + WrOff => Do not change pRing->pBuffer here because 2nd chunk needs org. value
|
|
SUBS R2,R2,R4 // NumBytes -= Rem; (Rem = pRing->SizeOfBuffer - WrOff; => Space until end of buffer)
|
|
_LoopCopyBeforeWrapAround: // memcpy(pRing->pBuffer + WrOff, pData, Rem); => Copy 1st chunk
|
|
LDRB R3,[R1], #+1
|
|
STRB R3,[R0], #+1 // *pDest++ = *pSrc++
|
|
SUBS R4,R4,#+1
|
|
BNE _LoopCopyBeforeWrapAround
|
|
//
|
|
// Special case: First check that assumed RdOff == 0 calculated that last element before wrap-around could not be used
|
|
// But 2nd check (considering space until wrap-around and until RdOff) revealed that RdOff is not 0, so we can use the last element
|
|
// In this case, we may use a copy straight until buffer end anyway without needing to copy 2 chunks
|
|
// Therefore, check if 2nd memcpy is necessary at all
|
|
//
|
|
ADDS R4,R2,#+0 // Save <NumBytes> (needed as counter in loop but must be written to <WrOff> after the loop). Also use this inst to update the flags to skip 2nd loop if possible
|
|
BEQ.N _No2ChunkNeeded // if (NumBytes) {
|
|
_LoopCopyAfterWrapAround: // memcpy(pRing->pBuffer, pData + Rem, NumBytes);
|
|
LDRB R3,[R1], #+1 // pData already points to the next src byte due to copy loop increment before this loop
|
|
STRB R3,[R5], #+1 // *pDest++ = *pSrc++
|
|
SUBS R2,R2,#+1
|
|
BNE _LoopCopyAfterWrapAround
|
|
_No2ChunkNeeded:
|
|
#if _CORE_NEEDS_DMB // Do not slow down cores that do not need a DMB instruction here
|
|
DMB // Cortex-M7 may delay memory writes and also change the order in which the writes happen. Therefore, make sure that all buffer writes are finished, before updating the <WrOff> in the struct
|
|
#endif
|
|
STR R4,[R6, #+12] // pRing->WrOff = NumBytes; => Must be written after copying data because J-Link may read control block asynchronously while writing into buffer
|
|
MOVS R0,#+1
|
|
POP {R4-R7}
|
|
BX LR // Return 1
|
|
_CheckCase4:
|
|
SUBS R0,R0,R7
|
|
SUBS R0,R0,#+1 // Avail = RdOff - WrOff - 1u;
|
|
CMP R0,R2
|
|
BCS.N _Case4 // if (Avail >= NumBytes) { => Case 4) == 1) ? => If not, we have case 5) == 3) (does not fit)
|
|
_Case3:
|
|
MOVS R0,#+0
|
|
POP {R4-R7}
|
|
BX LR // Return 0
|
|
_PLACE_LITS
|
|
|
|
#endif // defined (RTT_USE_ASM) && (RTT_USE_ASM == 1)
|
|
_END
|
|
|
|
/*************************** End of file ****************************/
|