knx/doc
nanosonde 77a796a39c
Add coupler support (#79)
* save work.

* save work

* save work

* save work

* save work

* Remember which interface received the cemi frame

* save work

* save work

* save work

* Use default value from PID_ROUTING_COUNT

* Add simple alternative to std::function without smart pointers or move semantics

* Remove include

* Add more comments about cleanup

* save work

* Remove forgotten code.

* Move crc16Ccitt to bits.c as it also used for PID_MCB

* save work

* move comment

* save work

* save work

* save work

* save work

* save work

* save work

* save work

* derive from TableObject instead of InterfaceObject

* save work

* save work

* Fix wrong pointer arithmetic in TableObject

* Filter table setting/clearing

* move comment

* save work

* save work

* save work

* handle SBC on closed media

* save work

* move coupler example to different dir

* Restore device example for linux

* save work

* Remove MEDIUM_TYPE and use MASK_VERSION

* save work

* save work

* save work

* save work

* save work

* save work

* save work

* save work

* save work

* save work

* save work

* save work

* save work

* save work

* Replace MEDIUM_TYPE by MASK_VERSION

* Remove adafruit/travis-ci tests

* Disable travis ci cache for platformio

* Fix missing changes

* Fix cemi server and add missing MASK_VERSION definitions

* Enable platformio caching on travis ci again

* Handle device address update for routing decision

* source address is set in network layer and not in data link layer

* Add remaining APCI types that are used with system broadcast

* Add debug print for routing

* Remove simple_functional

* Fix CMakLists.txt

* Use MASK_VERSION to conditionally compile code.

* Remove fixed version reuqirement from platform esp8266

* Add demo-coupler for MCUs

* Remove simple_functional.h from demo knx-linux

* Enable CI for coupler demos

* Correct path for knx-linux-coupler

* Fix knx_facade.h

* Refactor NetworkLayer to use getInterface() for devices and getPrimaryInterface(), getSecondaryInterface() for couplers

* Add platformio configs for other currently possible mask/platform combinations

* Add class diagrams and remove obsolete includes

* Add some minimal docs
2020-09-06 21:41:34 +02:00
..
CC1101-868mhz-radio-module-pinout.jpg Remove knx-rf-demo folder and move doc 2019-10-28 10:18:26 +01:00
conf.py
Doxyfile
example_list.h
index.rst
knx_cemi_notes.md Add cEMI Server with KNX USB HID support (#47) 2019-12-09 19:53:08 +01:00
knx_coupler_notes.md Add coupler support (#79) 2020-09-06 21:41:34 +02:00
knx_data_secure_notes.md Add coupler support (#79) 2020-09-06 21:41:34 +02:00
knx_rf_notes.md Add cEMI Server with KNX USB HID support (#47) 2019-12-09 19:53:08 +01:00
Makefile
references.bib document multicast methods of applicationlayer and transportlayer 2019-07-05 23:53:43 +02:00
requirements.txt