Changes the type used by the useEventSearch hook to be `EventSchema`
from OpenAPI instead. This is more accurate with what we're actually
getting. And crucially for the event log search, it contains the
`createdByUserId` property that we need to filter out events.
It's mostly a straightforward find and replace except for one instance
where we need to do some extra fiddling. There's an inline comment
explaining that.
This PR fixes a bug where we wouldn't update the `useFeatureSearch`
hook's cached `total` value if the new total was `0`. The reason this
failed is that we would only update it if `data?.total`. Because `0` is
a falsy value, the check would fail.
This PR disables the "create feature flag" button when you've reached
the limits.
This one is a little more complex than the other UI limits, because we
also have to take into account the project feature limit. I've tried to
touch as little as possible, but I _have_ extracted the calculation of
both limits into a single hook.
This PR activates the limit for API token creation in both the global
API token window and in the project-level API token tab.
Because the same button is used in two places, I encapsulated the
fetching of flags and resource limits within the button. I can be
convinced to pass the current API token count and the limit as
arguments, but I think this is the right solution for this case.
This PR updates the Unleash UI to use the new environment limit.
As it turns out, we already had an environment limit in the UI, but it
was hardcoded (luckily, its value is the same as the new default value
🥳).
In addition to the existing places this limit was used, it also disables
the "new environment" button if you've reached the limit. Because this
limit already exists, I don't think we need a flag for it. The only
change is that you can't click a button (that should be a link!) that
takes you to a page you can't do anything on.
Previously, clearing the SWR cache cleared all entries. Now you can
configure the cache size.
1. This makes the search more fluid. Previously, if you went back and
forth on pages, you were always sent to the loading state.
2. This also solves the issue where the command bar search cleared the
cache for all other searches.
3. Additionally, it addresses the problem where the global search
cleared the cache for project search.
Start tracking plausible events
1. Log the search keywords that returned 0 results
2. Track all clicks, based on source(search/recents/pages), type etc.
**Upgrade to React v18 for Unleash v6. Here's why I think it's a good
time to do it:**
- Command Bar project: We've begun work on the command bar project, and
there's a fantastic library we want to use. However, it requires React
v18 support.
- Straightforward Upgrade: I took a look at the upgrade guide
https://react.dev/blog/2022/03/08/react-18-upgrade-guide and it seems
fairly straightforward. In fact, I was able to get React v18 running
with minimal changes in just 10 minutes!
- Dropping IE Support: React v18 no longer supports Internet Explorer
(IE), which is no longer supported by Microsoft as of June 15, 2022.
Upgrading to v18 in v6 would be a good way to align with this change.
TS updates:
* FC children has to be explicit:
https://stackoverflow.com/questions/71788254/react-18-typescript-children-fc
* forcing version 18 types in resolutions:
https://sentry.io/answers/type-is-not-assignable-to-type-reactnode/
Test updates:
* fixing SWR issue that we have always had but it manifests more in new
React (https://github.com/vercel/swr/issues/2373)
---------
Co-authored-by: kwasniew <kwasniewski.mateusz@gmail.com>
This PR is part of #4380 - Remove legacy `/api/feature` endpoint.
## About the changes
### Frontend
- Removes the useFeatures hook
- Removes the part of StrategyView that displays features using this
strategy (not been working since v4.4)
- Removes 2 unused features entries from routes
### Backend
- Removes the /api/admin/features endpoint
- Moves a couple of non-feature related tests (auth etc) to use
/admin/projects endpoint instead
- Removes a test that was directly related to the removed endpoint
- Moves a couple of tests to the projects/features endpoint
- Reworks some tests to fetch features from projects features endpoint
and strategies from project strategies
At first, I was creating a new component, Project Banner, which was 90%
of the old banner and 10% new code, but it did not feel right. The
current banner is actually smart enough to be used in any container. So
now, I have moved the outdated SDK banner to the project level.
I like the simplicity of the change.
1. Added new schema and tests
2. Controller also accepts the data
3. Also sending fake data from frontend currently
Next steps, implement service/store layer and frontend
This fixes the case when a customer have thousands of strategies causing
the react UI to crash. We still consider it incorrect to use that amount
of strategies and this is more a workaround to help the customer out of
a crashing state.
We put it behind a flag called `manyStrategiesPagination` and plan to
only enable it for the customer in trouble.
This PR is a combination of two PRs:
This PR adds a functioning environment selection button to the new project creation form. Selected environments are added to the payload and to the API preview.
The implementation is mostly lifted from the existing FilterItem component we have for search filters. However, our need here is less complex, so I've removed some of the things we don't need. There is still more cleanup to be done, however, but I'd like to implement the rest of the submenus first, to see what we really do need in the end.
---
This PR adds support for stickiness and project mode in the new project
creation form.
Achieve this, it does a few things:
1. Moves `resolveStickinessOptions` from
`frontend/src/component/feature/StrategyTypes/FlexibleStrategy/StickinessSelect/StickinessSelect.tsx`
and into a separate hook. This component was used by the old project
creation form. Because the new form has a different input, but needs the
same option, moved that code into a reusable hook.
2. It adds functioning buttons for project stickiness and mode.
3. It adds labels to the search inputs for the dropdowns. Inputs *must*
have labels to meet a11y requirements. However, the designs don't have
labels, so we can hide them visually. Though that leads to another issue
(refer to the screen shot below).
4. It updates the `SelectionButton` component to handle both single- and
multiselect cases. It instead exports these two subcomponents. These are
currently in one file, but I'll split them out into their separate files
in a later PR.
As a side effect of working with the selection buttons, it also improves
how we handle keyboard interaction for these buttons.
Here's what it looks like for single-select lists. Notice the missing
part of the input's border around the top (where the label *would* be if
we showed it). We should figure out how best to handle it. I've done
like this for now, but we can sort it out later.
- Adds support for the configuration option for SCIM taking over control
of users and groups
- Moves SCIM settings into SSO config pages (OIDC and SAML). SCIM
registers a callback to be invoked when saving in a parent SSO config
page
This change specifies the update type as `replace` for the
`useQueryParams` hook used to set table state.
Primarily, this prevents the column selection from being added to the
browser
history and more importantly prevents you from changing your config by
navigating through browser history.
However, this also affects other table state, such as changing sorting
order etc. These will also no longer be added to the browser history.
---
Bug description:
In the project flag table, you can select which env columns to show.
However, adding and removing these envs get added as steps in your
browser history. This means that if you add 3 envs, you:
1. have to go back three times to get back to the previous page
2. In doing so, you also inadvertently revert the choices you mean,
which can be confusing.
Steps to reproduce:
1. Navigate to the project screen
2. Use the column selector to add/remove projects. Notice that the URL
changes for each selection you make.
3. After making one or more changes, use the browser's
back-functionality. Notice that you stay on the same page but that the
selected envs (and the URL) change.
Previously, the dummy data would persist when there is no data coming
from the API. This causes us to display dummy data in the dora metrics
table which is not correct. This PR fixes that by only showing the
loading features when we are actually loading.
