82 lines
2.0 KiB
OpenSCAD
82 lines
2.0 KiB
OpenSCAD
include <./rosetta.scad>
|
|
|
|
base = 160; // mm
|
|
top = 90; //mm
|
|
height = 40;
|
|
thickness = 9; // mm
|
|
thick_height=7; // mm
|
|
delta = 0.01;
|
|
|
|
// M4
|
|
screw_width = 5; //mm
|
|
piulitza = 7; // mm
|
|
piulitza_h = 4; // mm
|
|
|
|
// dent depth
|
|
dent_depth = 3.5;
|
|
|
|
base_2 = base/2;
|
|
top_2 = top/2 - 1;
|
|
top_3 = top_2 - 5;
|
|
top_4 = top_2/2;
|
|
screw_distance = 33;
|
|
inital_screw_angle = -30;
|
|
|
|
thin_base = (base-thickness);
|
|
thin_base_2 = thin_base/2;
|
|
|
|
//slit
|
|
slit_b1 = (thickness*2/3)/2;
|
|
slit_b2 = slit_b1/2;
|
|
slit_h = slit_b2;
|
|
|
|
module ovaloid(radius, width, height) {
|
|
union(){
|
|
translate([-width/2+radius,0,0]) cylinder(r=radius, h=height);
|
|
translate([width/2 - radius, 0,0]) cylinder(r=radius, h=height);
|
|
translate([0,0,height/2]) cube([width-radius*2, radius*2, height],center=true);
|
|
}
|
|
}
|
|
|
|
module hole(radius, width, height, thickness) {
|
|
difference() {
|
|
ovaloid(radius,width,height);
|
|
translate([0,0,-delta])
|
|
ovaloid(radius-thickness,width-thickness*3.14/2,height+2*delta);
|
|
}
|
|
}
|
|
|
|
union() {
|
|
translate([0,0,-2])
|
|
hole(screw_width+3,screw_width*5+6,1.5,1.5);
|
|
translate([0,-base/3,-2])
|
|
rotate([0,0,90])
|
|
hole(screw_width+3,screw_width*5+6,1.5,1.5);
|
|
|
|
difference() {
|
|
cube([base,base,thickness], center= true);
|
|
translate([0,0,dent_depth-1])
|
|
cube([thin_base,thin_base,thickness], center= true);
|
|
|
|
// screws
|
|
translate([0,0,-thickness-delta])
|
|
ovaloid(screw_width,screw_width*5,10);
|
|
|
|
translate([0,-base/3,0])
|
|
rotate([0,0,90])
|
|
translate([0,0,-thickness-delta])
|
|
ovaloid(screw_width,screw_width*5,10);
|
|
|
|
}
|
|
|
|
// The two slits to slide the base into
|
|
//
|
|
translate([-base_2 + slit_b2*3/2,base_2-slit_h,thickness-4-delta])
|
|
rotate([90, 180, 0])
|
|
trapeze(slit_b1,slit_b2,slit_h,base-slit_h);
|
|
|
|
translate([base_2 - slit_b2*3/2,base_2-slit_h,thickness-4-delta])
|
|
rotate([90, 180, 0])
|
|
trapeze(slit_b1,slit_b2,slit_h,base-slit_h);
|
|
|
|
} |