* refactor existing motion detector
* implement and use cnt bgsub
* pass fps to motion detector
* create a simplified motion detector
* lightning detection
* update default motion config
* lint imports
* use estimated boxes for regions
* use improved motion detector
* update test
* use a different strategy for clustering motion and object boxes
* increase alpha during calibration
* simplify object consolidation
* add some reasonable constraints to the estimated box
* adjust cluster boundary to 10%
* refactor
* add disabled debug code
* fix variable scope
* Add option for network bandwidth and only calculate if enabled
* Don't show network bandwidth in system stats page if not enabled
* Formatting
* Hide other rows as well
* Add docs
* Add config options for AMD and Intel GPU stats
* Fix stats access
* Update docs
* Use correct bool syntax
Co-authored-by: Blake Blackshear <blakeb@blakeshome.com>
---------
Co-authored-by: Blake Blackshear <blakeb@blakeshome.com>
* Objects need to be in zones multiple times to be considered present in the zone
* Add a field to configure inertia per zone
* Formatting
* Use correct default method
* Clarify zone presence behavior
Co-authored-by: Blake Blackshear <blakeb@blakeshome.com>
---------
Co-authored-by: Blake Blackshear <blakeb@blakeshome.com>
* Add function to get physical interfaces for bandwidth calculation in get_bandwidth_stats() function
* Add telemetry configuration option for enabled network interfaces, with default values for monitoring bandwidth stats for camera ffmpeg processes, go2rtc, and object detectors. Also add support for FrigateConfig in set_bandwidth_stats function to get bandwidth stats for specified network interfaces
* Add isort and ruff linter
Both linters are pretty common among modern python code bases.
The isort tool provides stable sorting and grouping, as well as pruning
of unused imports.
Ruff is a modern linter, that is very fast due to being written in rust.
It can detect many common issues in a python codebase.
Removes the pylint dev requirement, since ruff replaces it.
* treewide: fix issues detected by ruff
* treewide: fix bare except clauses
* .devcontainer: Set up isort
* treewide: optimize imports
* treewide: apply black
* treewide: make regex patterns raw strings
This is necessary for escape sequences to be properly recognized.
* Add option to sort cameras inside Birdseye
* Make default order to be sorted alphabetically
* Add docs for sorting cameras
* Update index.md for cameras
* Remove irelevant comments
* Add support for ptz commands via websocket
* Fix startup issues
* Fix bugs
* Set config manually
* Add more commands
* Add presets
* Add zooming
* Fixes
* Set name
* Cleanup
* Add ability to set presets from UI
* Add ability to set preset from UI
* Cleanup for errors
* Ui tweaks
* Add visual design for pan / tilt
* Add pan/tilt support
* Support zooming
* Try to set wsdl
* Fix duplicate logs
* Catch auth errors
* Don't init onvif for disabled cameras
* Fix layout sizing
* Don't comment out
* Fix formatting
* Add ability to control camera with keyboard shortcuts
* Disallow user selection
* Fix mobile pressing
* Remove logs
* Substitute onvif password
* Add ptz controls ot birdseye
* Put wsdl back
* Add padding
* Formatting
* Catch onvif error
* Optimize layout for mobile and web
* Place ptz controls next to birdseye view in large layout
* Fix pt support
* Center text titles
* Update tests
* Update docs
* Write camera docs for PTZ
* Add MQTT docs for PTZ
* Add ptz info docs for http
* Fix test
* Make half width when full screen
* Fix preset panel logic
* Fix parsing
* Update mqtt.md
* Catch preset error
* Add onvif example to docs
* Remove template example from main camera docs
* Migrate db path to /config
* Ensure oneshot runs
* Put logic inside of Frigate's run
* Use new db default path in code
* Fix missing config dir
* Upgrade yq to 4.33.3
* Add docs for time / date styling
* Convert 12hour time format option to enum
* Change option in web
* Add docs with examples
* Fix errors in docs
* Fix mismatched names
* Add config fields
* Clean up camera default values
* Set recordings timezone with config if available
* Adjust for timezone config
* Cleanup setting of the timezone
* Don't fail on MSE check iPad
* Fix MSE check for birdseye
* Add docs
* Fix test
* Add video codec to restream config
* Add handling of encode engine and video codec
* Add test for video encoding
* Set in main configuration docs as well
* Add example to restream docs
* Put back patch
* Try using RTSP for restream
* Add ability to get snapshot of birdseye when birdseye restream is enabled
* Write to pipe instead of encoding mpeg1
* Write to cache instead
* Use const for location
* Formatting
* Add hardware encoding for birdseye based on ffmpeg preset
* Provide framerate
* Adjust args
* Fix order
* Delete pipe file if it exists
* Cleanup spacing
* Fix spacing
* Catch when recording segments are not being written to cache and restart ffmpeg responsible for record
* Ensure this check is only run for role with record
* Fix formatting
* Redo recordings validator to watch segments time and restart if no segment for 30 seconds
* Formatting
* Increase wait time to 120 seconds and improve error message
* Add more config checks for record args and add test
* Formatting
* Specify output args.
* Add raw config endpoint
* Add config editor
* Add code editor
* Add error
* Add ability to copy config
* Only show the save button when code has been edited
* Update errors
* Remove debug config from system page
* Break out config saving steps to pinpoint where error occurred.
* Show correct config errors
* Switch to monaco editor
* Adjust UI colors and behavior
* Get yaml validation working
* Set success color
* Initial work for adding OpenVino detector. Not functional
* Load model and submit for inference.
Sucessfully load model and initialize OpenVino engine with either CPU or GPU as device.
Does not parse results for objects.
* Detection working with ssdlite_mobilenetv2 FP16 model
* Add OpenVIno support and model to docker image
* Add documentation for OpenVino detector configuration
* Adds support for ARM32/ARM64 and the Myriad X hardware
- Use custom-built openvino wheel for all platforms
- Add libusb build without udev for NCS2 support
* Add documentation around Intel CPU requirements and NCS2 setup
* Print all available output tensors
* Update documentation for config parameters
* Add hwaccel presets
* Use hwaccel presets
* Add input arg presets
* Use input arg presets
* Make util to clean up redundant code
* Add support for output arg presets
* Add tests
* Update camera specific to use presets
* Update hwaccel to use presets
* Format files and fix tests
* Rewrite tests to test record correctly
* Move presets from string to list to avoid manually separating into a list
* Add mjpeg cuvid decoder preset
* Fix tests
* Fix comment
* Add option for mqtt config
* Setup communication layer
* Have a dispatcher which is responsible for handling and sending messages
* Move mqtt to communication
* Separate ws communications module
* Make ws client conform to communicator
* Cleanup imports
* Migrate to new dispatcher
* Clean up
* Need to set topic prefix
* Remove references to mqtt in dispatcher
* Don't start mqtt until dispatcher is subscribed
* Cleanup
* Shorten package
* Formatting
* Remove unused
* Cleanup
* Rename mqtt to ws on web
* Fix ws mypy
* Fix mypy
* Reformat
* Cleanup if/else chain
* Catch bad set commands
* Update go2rtc to rc3
* Simplify ffmpeg / audio conversions
* Set ffmpeg bin location
* Manually set video as copied
* Run go2rtc with env vars
* Remove manual ffmpeg declaration
* Enable force_audio by default
* Fix test
* Move existing checks to own functions
* Add config check for zone objects that are not tracked
* Add tests for config error
* Formatting
* Catch case where field is defined multiple times and add test
* Add warning for rtmp
* Refactor EdgeTPU and CPU model handling to detector submodules.
* Fix selecting the correct detection device type from the config
* Remove detector type check when creating ObjectDetectProcess
* Fixes after rebasing to 0.11
* Add init file to detector folder
* Rename to detect_api
Co-authored-by: Nicolas Mowen <nickmowen213@gmail.com>
* Add unit test for LocalObjectDetector class
* Add configuration for model inputs
Support transforming detection regions to RGB or BGR.
Support specifying the input tensor shape. The tensor shape has a standard format ["BHWC"] when handed to the detector, but can be transformed in the detector to match the model shape using the model input_tensor config.
* Add documentation for new model config parameters
* Add input tensor transpose to LocalObjectDetector
* Change the model input tensor config to use an enumeration
* Updates for model config documentation
Co-authored-by: Nicolas Mowen <nickmowen213@gmail.com>
* Consts for regex
* Add regex for camera username and password
* Redact user:pass from ffmpeg logs
* Redact ffmpeg commands
* Move common function to util
* Add tests
* Formatting
* Remove unused imports
* Fix test
* Add port to test
* Support special characters in passwords
* Add tests for special character handling
* Remove docs about not supporting special characters
* add option enabled for each camera in config
* Simplified If-block and removed wrong Optional
* Update Docs enabling/disabling camera in config
* correct format for option
* Disabling Camera for processes, no config changes
* Describe effects of disabled cam in documentation
* change if-logic, obsolete copy, info disabled cam
* changed color to white, added top padding in disabled camera info
* changed indentation
* Pull go2rtc dependency
* Add go2rtc to local services and add to s6
* Add relay controller for go2rtc
* Add restream role
* Add restream role
* Add restream to nginx
* Add camera live source config
* Disable RTMP by default and use restream
* Use go2rtc for camera config
* Fix go2rtc move
* Start restream on frigate start
* Send restream to camera level
* Fix restream
* Make sure jsmpeg works as expected
* Make view rspect live size config
* Tweak player options to fit live view
* Adjust VideoPlayer to accept live option which disables irrelevant controls
* Add multiple options from restream live view
* Add base for webrtc option
* Setup specific restream modules
* Make mp4 the default streaming for now
* Expose 8554 for rtsp relay from go2rtc
* Formatting
* Update docs to suggest new restream method.
* Update docs to reflect restream role
* Update docs to reflect restream role
* Add webrtc player
* Improvements to webRTC
* Support webrtc
* Cleanup
* Adjust rtmp test and add restream test
* Fix tests
* Add restream tests
* Add live view docs and show different options
* Small docs tweak
* Support all stream types
* Update to beta 9 of go2rtc
* Formatting
* Make jsmpeg the default
* Support wss if made from https
* Support wss if made from https
* Use onEffect
* Set url outside onEffect
* Fix passed deps
* Update docs about required host mode
* Try memo instead
* Close websocket on changing camera
* Formatting
* Close pc connection
* Set video source to null on cleanup
* Use full path since go2rtc can't see PATH var
* Adjust audio codec to enable browser audio by default
* Cleanup stream creation
* Add restream tests
* Format tests
* Mock requests
* Adjust paths
* Move stream configs to restream
* Remove live source
* Remove live config
* Use live persistence for which view to use on each camera
* Fix live sizes
* Only use jsmpeg sizes for jsmpeg live
* Set max live size
* Remove access of live config
* Add selector for live view source in web view
* Remove RTMP from default list of roles
* Update docs
* Fix tests
* Fix docs for live view modes
* make default undefined to avoid race condition
* Wait until camera source is loaded to avoid race condition
* Fix tests
* Add config to go2rtc
* Work with config
* Set full path for config
* Set to use stun
* Check for mounted file
* Look for frigate-go2rtc
* Update docs to reflect webRTC configuration.
* Add link to go2rtc config
* Update docs to be more clear
* Update docs to be more clear
* Update format
Co-authored-by: Felipe Santos <felipecassiors@gmail.com>
* Update live docs
* Improve bash startup script
* Add option to force audio compatibility
* Formatting
* Fix mapping
* Fix broken link
* Update go2rtc version
* Get go2rtc webui working
* Add support for mse
* Remove mp4 option
* Undo changes to video player
* Update docs for new live view options
* Make separate path for mse
* Remove unused
* Remove mp4 path
* Try to get go2rtc proxy working
* Try to get go2rtc proxy working
* Remove unused callback
* Allow websocket on restrea dashboard
* Make mse default stream option
* Fix mse sizing
* don't assume roles is defined
* Remove nginx mapping to go2rtc ui
Co-authored-by: Felipe Santos <felipecassiors@gmail.com>
Co-authored-by: Blake Blackshear <blakeb@blakeshome.com>
