Added checks for RF 0x27B0 as that should work ootb I suppose.
Builds and uploads successfully.
Gives the debug output "ERROR, RF transceiver not responding" since I have no RF hw to test.
Same goes for the TP 0x07B0. Build and uploads successfully.
Gives the debug output "ERROR, TPUART not responding" since no I have no TP uart hw to test.
Now checking for __SAMD21__ and __SAMD51__ in knx_facade, samd_platform (samd21) and samd51_platform (samd51)
Preparation for external flash functionality in platform.h
* Update stm32_platform.cpp
Addresses a side effect of https://github.com/thelsing/knx/pull/177, which causes the eeprom buffer to be overwritten every time getEepromBuffer is called. This prevented programming of STM32 boards as their initial bus address was lost before programming.
* progbutton fix
* Update stm32_platform.cpp
Addresses a side effect of https://github.com/thelsing/knx/pull/177, which causes the eeprom buffer to be overwritten every time getEepromBuffer is called. This prevented programming of STM32 boards as their initial bus address was lost before programming.
* Update knx_facade.h
Remove superfluous attribute _buttonPinInterruptOn
* Update knx_facade.h
attachInterrup on CHANGE for progbutton detection
* Refactored the knx_facade a bit to make the auto-building of the global knx object and the buttonUp() ISR function opt-in. Also added the ability to quite easily attach another serial (in this case tested with Serial2 of an ESP32).
* Added visual studio code temp files to .gitignore
* Fix for missing build flag for WifiManager in ESP32_ip demo
* Added example in which we DIY build the KNX object and use ESP32's second UART to connect so that you can debug with the first one that's connected to USB.
* Minor platform cleanups to remove compilation warnings.
* ESP32 can't handle the defaulted 8192 byte EPROM. Next to that I needed to begin() the eprom lib in my setup() to get it to work and that requires knowing how much memory KNX will use. This fix makes the default more conservative and moves it's definition to the .h file so that other files can always use it as well.
* After comments from thelsing, inverted the logic. The default global knx object is now opt-out by defining KNX_NO_AUTOMATIC_GLOBAL_INSTANCE. See the knx-demo-diy project for an example.
Minor syntactic cleanups.
* Removed hardwareserial from facade (detail which was not needed)
Placed facade constructors together
Minor syntactic cleanup
* Fixed knx-cc1310 where own button routine was calling now private internal knx facade variable.
Renamed files in knx-demo-diy
Minor syntactic stuff
* Added gitattributes for binary knxprod files
* Fix not-relative include
throws if a include directory is not set.
* add forgotten defined() in environment checking '#elif's
* fix mis-spelled "config.j"
* Add float type support to Parameters
All 3 encodings supported.
* Using dptconvert functions to handle parameters handling
* Initial commit
* Clean up
* Remove display code
* Change cmake build
* Add SimpleLink SDK for CC13xx/CC26xx as submodule
* Remove commented line from build.sh
* Working build
* Remove SDK submodule
* Squashed 'examples/knx-cc1310/coresdk_cc13xx_cc26xx/' content from commit 0d78d32
git-subtree-dir: examples/knx-cc1310/coresdk_cc13xx_cc26xx
git-subtree-split: 0d78d3280357416a5c0388148cda13717c9ffaa5
* Add more comments and enable Power_idleFunc() for NoRTOS variant.
Internal SDK driver functions which have to wait for something
will cause Power_idleFunc to be called instead of doing busy wait.
* Move CC1310 platform init around
* Optimize a bit more in debug build config as the binary does not fit into 128Kb flash otherwise.
* Explicitly list each source/header file in build config. Use linker group to resolve circular dependencies.
* Ignore vscode settings.json
* Increase stacks size
* Only compile CC1310 source code if #define DeviceFamily_CC13X0
* initial commit of CC1310 RF driver with first working RX version
* Better handling of buttonUp() across platforms
* Start cleanup
* continue cleanup
* Fix bau2920 compilation
* Continue cleanup
* Fix compilation in other examples
* Fix compilation
* htons() and ntohs() only for SAMD and STM32, but not for Linux and ESP8266 and ESP32
* htons(9 and ntohs() needed for CC13x0
* Continue cleanup
* Add CC1310 platform to CI
* Fix CI
* Use more recent toolchain from ARM
* Fix travis
* Use Ubuntu Focal
* Fix toolchain for travis
* Fix package name
* Fix toolchain
* Add libstdc++-dev package
* Add newlib packages
* Remove commented commands from CI
* Fix travis
* Fix compilation of knxPython
* Clean up linefeeds
* Fix RX callback
* Move RF CRC16-DNP to bits.cpp
* Fix TX
* Optimization: do not calc CRC for block1 again in rf_data_link_layer
* Make newline optional in printHex
* Cleanup. First working version: ETS5 programming of individual address via KNX/RF coupler.
* Use LEDs and Buttons to control ProgMode and Flash Erase
* Remove settings.json (VScode)
* Add README.md
* Update README.md
* Update README.md
* Fix typo
* save work.
* save work
* save work
* save work
* save work
* Remember which interface received the cemi frame
* save work
* save work
* save work
* Use default value from PID_ROUTING_COUNT
* Add simple alternative to std::function without smart pointers or move semantics
* Remove include
* Add more comments about cleanup
* save work
* Remove forgotten code.
* Move crc16Ccitt to bits.c as it also used for PID_MCB
* save work
* move comment
* save work
* save work
* save work
* save work
* save work
* save work
* save work
* derive from TableObject instead of InterfaceObject
* save work
* save work
* Fix wrong pointer arithmetic in TableObject
* Filter table setting/clearing
* move comment
* save work
* save work
* save work
* handle SBC on closed media
* save work
* move coupler example to different dir
* Restore device example for linux
* save work
* Remove MEDIUM_TYPE and use MASK_VERSION
* save work
* save work
* save work
* save work
* save work
* save work
* save work
* save work
* save work
* save work
* save work
* save work
* save work
* save work
* Replace MEDIUM_TYPE by MASK_VERSION
* Remove adafruit/travis-ci tests
* Disable travis ci cache for platformio
* Fix missing changes
* Fix cemi server and add missing MASK_VERSION definitions
* Enable platformio caching on travis ci again
* Handle device address update for routing decision
* source address is set in network layer and not in data link layer
* Add remaining APCI types that are used with system broadcast
* Add debug print for routing
* Remove simple_functional
* Fix CMakLists.txt
* Use MASK_VERSION to conditionally compile code.
* Remove fixed version reuqirement from platform esp8266
* Add demo-coupler for MCUs
* Remove simple_functional.h from demo knx-linux
* Enable CI for coupler demos
* Correct path for knx-linux-coupler
* Fix knx_facade.h
* Refactor NetworkLayer to use getInterface() for devices and getPrimaryInterface(), getSecondaryInterface() for couplers
* Add platformio configs for other currently possible mask/platform combinations
* Add class diagrams and remove obsolete includes
* Add some minimal docs
* bugfix, print not allowed in constructor
* Update tpuart_data_link_layer.cpp
- start confirm timout only after last byte was sent
- increase BYTE_TIMEOUT
* debounce progbutton
* added overload to platform constructors for custom HardwareSerial-object
* added setter/getter setUart & getUart
* set Serial1 as default UART for ESP32
