knx stack (TP, IP and RF) for arduino and linux, Can be configured with ETS
Go to file
2024-08-09 19:08:47 +02:00
.github/workflows Squashed 'examples/knxPython/pybind11/' changes from 59a2ac27..941f45bc 2024-06-29 16:48:45 +02:00
.vscode 32bit eeprom size (#230) 2023-02-13 21:39:30 +01:00
doc Update conf.py 2023-09-09 21:31:37 +02:00
examples add rp2040 build environment to knx-demo example for both example project and ci 2024-08-09 19:08:47 +02:00
src Update bau57B0.cpp 2024-07-22 12:56:06 +02:00
.clang-format Squashed 'examples/knxPython/pybind11/' changes from 59a2ac27..941f45bc 2024-06-29 16:48:45 +02:00
.gitattributes Squashed 'examples/knxPython/pybind11/' changes from 59a2ac27..941f45bc 2024-06-29 16:48:45 +02:00
.gitignore Squashed 'examples/knxPython/pybind11/' changes from 59a2ac27..941f45bc 2024-06-29 16:48:45 +02:00
.readthedocs.yaml Update .readthedocs.yaml 2023-09-09 21:16:48 +02:00
CMakeLists.txt Squashed 'examples/knxPython/pybind11/' changes from 59a2ac27..941f45bc 2024-06-29 16:48:45 +02:00
library.properties Update library.properties 2020-06-19 21:57:46 +02:00
LICENSE Create LICENSE 2018-04-21 21:51:41 +02:00
platformio.ini add platformio file and fix compiling without IP 2020-05-08 01:50:50 +02:00
README.md replace deprecated CreateKnxProd link with Kaenx-Creator 2024-01-23 20:22:31 +01:00

knx

This projects provides a knx-device stack for arduino (ESP8266, ESP32, SAMD21, RP2040, STM32), CC1310 and linux. (more are quite easy to add) It implements most of System-B specification and can be configured with ETS. The necessary knxprod-files can be generated with the Kaenx-Creator tool.

For ESP8266 and ESP32 WifiManager is used to configure wifi.

Don't forget to reset ESP8266 manually (disconnect power) after flashing. The reboot doen't work during configuration with ETS otherwise.

Generated documentation can be found here.

Stack configuration possibilities

Specify prog button GPIO other then GPIO0:

knx.buttonPin(3); // Use GPIO3 Pin

Specify a LED GPIO for programming mode other then the LED_BUILTIN:

knx.ledPin(5);

Use a custom function instead of a LED connected to GPIO to indicate the programming mode:

#include <Arduino.h>
#include <Adafruit_NeoPixel.h>
#include <knx.h>
// create a pixel strand with 1 pixel on PIN_NEOPIXEL
Adafruit_NeoPixel pixels(1, PIN_NEOPIXEL);

void progLedOff()
{
  pixels.clear();
  pixels.show();
}

void progLedOn()
{
  pixels.setPixelColor(0, pixels.Color(20, 0, 0));
  pixels.show();
}

void main ()
{
 knx.setProgLedOffCallback(progLedOff);
 knx.setProgLedOnCallback(progLedOn);
 [...]
}

More configuration options can be found in the examples.