d24f6de36f
Added checks for RF 0x27B0 as that should work ootb I suppose. Builds and uploads successfully. Gives the debug output "ERROR, RF transceiver not responding" since I have no RF hw to test. Same goes for the TP 0x07B0. Build and uploads successfully. Gives the debug output "ERROR, TPUART not responding" since no I have no TP uart hw to test. |
||
---|---|---|
.github/workflows | ||
.vscode | ||
doc | ||
examples | ||
src | ||
.clang-format | ||
.gitattributes | ||
.gitignore | ||
CMakeLists.txt | ||
library.properties | ||
LICENSE | ||
platformio.ini | ||
README.md |
knx
This projects provides a knx-device stack for arduino (ESP8266, ESP32, SAMD21, RP2040, STM32), CC1310 and linux. (more are quite easy to add) It implements most of System-B specification and can be configured with ETS. The necessary knxprod-files can be generated with my CreateKnxProd tool.
For ESP8266 and ESP32 WifiManager is used to configure wifi.
Don't forget to reset ESP8266 manually (disconnect power) after flashing. The reboot doen't work during configuration with ETS otherwise.
Generated documentation can be found here.
Stack configuration possibilities
Specify prog button GPIO other then GPIO0
:
knx.buttonPin(3); // Use GPIO3 Pin
Specify a LED GPIO for programming mode other then the LED_BUILTIN
:
knx.ledPin(5);
Use a custom function instead of a LED connected to GPIO to indicate the programming mode:
#include <Arduino.h>
#include <Adafruit_NeoPixel.h>
#include <knx.h>
// create a pixel strand with 1 pixel on PIN_NEOPIXEL
Adafruit_NeoPixel pixels(1, PIN_NEOPIXEL);
void progLedOff()
{
pixels.clear();
pixels.show();
}
void progLedOn()
{
pixels.setPixelColor(0, pixels.Color(20, 0, 0));
pixels.show();
}
void main ()
{
knx.setProgLedOffCallback(progLedOff);
knx.setProgLedOnCallback(progLedOn);
[...]
}
More configuration options can be found in the examples.