This escape with `??` double escaped the LIKE query causing no results.
This updates to using whereLike, which does the correct escaping for
string query.
## About the changes
Adds a scheduled task that every 5 seconds updates 500 entries in the
features table setting `created_by_user_id`.
It does this by looking at the related event, checks created_by and
joins users table for match on username or email, and joins api_tokens
table on username matches. Then picks either a users id if set, or uses
-42 (admin token user)
## About the changes
This PR replaces the old systemUser -1 in user-service.ts with the new
SYSTEM_USER -1337 and adds a migration to move events created_by = -1 to
-1337
## Discussion points
Does it make sense to do both of these things? Or should we skip the
migration? How would this behave in a large system with hundreds of
thousands of events, should this be split up?
Only triggers if there is any rows in client instances that have
sdk_version: unleash-edge with version < 17.0.0
The function that checks this memoizes the check for 10 minutes to avoid
scanning the client instances table too often.
Previously we used a killswitch and returned 404 if the feature was
enabled. This flips that to a default disabled toggle, that has to be
turned on to handle old Edge (pre 17.0.0) posting bulk metrics
We should use the enhanced flagResolver
Tested locally:
```
9:44:13 AM - Starting compilation in watch mode...
[dev:backend]
[dev:backend]
[dev:backend] 9:44:26 AM - Found 0 errors. Watching for file changes.
[dev:backend] [2024-01-23T09:44:27.498] [INFO] server-impl.js - DB migration: start
[dev:backend] [2024-01-23T09:44:27.499] [INFO] server-impl.js - Running migration with lock
[dev:backend] [2024-01-23T09:44:29.884] [INFO] server-impl.js - DB migration: end
```
This PR will allow us to use a feature flag with variants to control
whether or not we should show the comments field of the feedback form.
This will allow us to see whether we can increase feedback collection if
we reduce the load on the customer.
## About the changes
This was spotted while testing automated actions. Steps to reproduce:
1. Add an editor user
2. Get a PAT for the editor user
3. As Admin create a feature in a project where the editor user is not a
member and enable the feature
4. Try using the editor's PAT to modify the feature
5. As the editor create a project (you'd be made owner) and try the same
request but just change the project name for the new project just
created (don't change anything else)
**Expected behavior**: you can't disable the feature
**Actual behavior**: the feature is disabled
This does not happen when trying to turn on a flag because during the
turn-on process we do validate if the feature belongs to project when we
call updateStrategy:
c18a7c0dc2/src/lib/features/feature-toggle/feature-toggle-service.ts (L1751-L1764)
https://linear.app/unleash/issue/2-1856/add-typesafe-wrappers-over-prom-clients-metrics
As discussed on the latest knowledge sharing session, this adds typesafe
wrappers over prom client's metrics, requiring us to specify all the
configured labels for each metric.
This uses a functional approach and only exposes the methods that are
currently relevant to us, while also exposing the underlying instance of
the metric for an easy access if needed.
Since we often chain `labels` with `inc` in counters, this adds a
convenience `increment` method for counters which does both in a single
call.
Uses a new `URL_SAFE_BASIC` regex constant that checks for characters
that are commonly used in URL path sections: alphanumeric lowercase
characters, dashes and underscores.
This will allow us to re-use this constant in our server-side
validation.
Follow up of https://github.com/Unleash/unleash/issues/4303
We are adding primary keys to all tables missing them, currently
**role_permission**, **api_token_project**, and **project_stats**.
By adding primary keys, the issue with migrations failing during
upgrades in replicated database setups will be resolved.
So, this was causing a lot of ERROR in our logs, due to the metric
having gotten an extra label the last month.
Two things for this fix.
1. add the missing label to the two calls that did not have it added
2. update the log line to include the error as another argument to the
logger, so we actually get a stacktrace from the error.
### What
Adds Read and Write permissions for project administration settings
(user access, change request settings, default strategy, other).
### Why
On request from two large customers that wanted our RBAC controls to be
more granulated to easier be able to limit the access they granted their
users.
## About the changes
Whenever we get a call from an admin token we want to associate it with
the [admin token
user](4d42093a07/src/lib/types/core.ts (L34-L41)).
This should give us the needed audit for this type of calls that
currently were lacking a user id (we only stored a string with the token
name in the event log).
We consciously decided not to use `id` as the property to prevent any
unforeseen side effects. The reason is that only `IUser` type has an id
and adding an id to `IApiUser` might lead to confusion.
Since we've now added PAT's we really do recommend switching to those,
or for enterprises, we recommend using service accounts.
Admin tokens have an obvious disadvantage in that they're not connected
to any user, so actions performed by them are harder to audit.
This PR adds a killswitch for turning it off, in preparation for
deprecating them and ultimately removing them in the future.
## About the changes
This admin token user will help us differentiate actions performed by
the system from actions performed with an admin token.
Events created with an admin token should have the id of this user as
createdByUserId property and the username of the token used as the
createdBy property. i.e.
```json
{
"id": 11,
"type": "pat-created",
"createdBy": "admin-token",
"createdAt": "2024-01-16T13:16:27.887Z",
"createdByUserId": -42,
"data": {
"description": "admin-pat",
"expiresAt": "2024-02-15T13:16:25.586Z",
"secret": "***",
"userId": 1
},
"preData": null,
"tags": [],
"featureName": null,
"project": null,
"environment": null
}
```
## About the changes
EventsService is a dependency in most of our services. This creates
helper methods to create them easily and replace a few places where
we're creating them manually
This change removes the system user's email from the definition, instead
setting it to `null`. It also changes the name to "Unleash System".
The IUser interface doesn't allow `null` email addresses, so we change
the type definition of the system user to get around it. However, using
`null` (instead of just removing the property entirely) is useful
because when you get the system user from the DB, it's email value will
be null (after it has been nulled out).
As of today, there is nowhere in the Unleash system (OSS or Enterprise)
where we use the system user as an IUser (we only use username and ID).
So this change shouldn't break anything.
This should follow https://github.com/Unleash/unleash/pull/5849.
Updates it from 'system@getunleash.io' to `null`. We don't have that
address registered (and probably don't want it), so we'll leave it
empty.
This is a companion PR to
https://github.com/Unleash/unleash/pull/5893. With both of those
merged, the system user in the DB should match the one defined in
`core.ts`
Lots of work here, mostly because I didn't want to turn off the
`noImplicitAnyLet` lint. This PR tries its best to type all the untyped
lets biome complained about (Don't ask me how many hours that took or
how many lints that was >200...), which in the future will force test
authors to actually type their global variables setup in `beforeAll`.
---------
Co-authored-by: Gastón Fournier <gaston@getunleash.io>
This change adjusts the exported `SYSTEM_USER` constant in `core.ts` to
match the one created in the migration in
`src/migrations/20231222071533-unleash-system-user.js`
The slight discrepancy between these two caused me some minor headache
when trying to write a test in enterprise.
It also removes the email because we have no inbox at that address (and
we probably don't want one).
For reference, the migration looks like this:
``` sql
ALTER TABLE users ADD COLUMN IF NOT EXISTS is_system BOOLEAN NOT NULL DEFAULT FALSE;
INSERT INTO users
(id, name, username, email, created_by_user_id, is_system)
VALUES
(-1337, 'Unleash System', 'unleash_system_user', 'system@getunleash.io', -1337, true);
```
This adds a bulk endpoint under `/api/client/metrics`. Accessible under
`/api/client/metrics/bulk`.
This allows us to piggyback on the need for an API user with access.
This PR mostly copies the behaviour from our `/edge/metrics` endpoint,
but it filters metrics to only include the environment that the token
has access to.
So a client token that has access to the `production` will not be
allowed to report metrics for the `development` environment. More
importantly, a `development` token will not be allowed to post metrics
for the `production` environment.
This PR adds the schedule suspended event to the slack-app and webhook
definitions.
It also slightly tweaks the markdown formatting of change requests to
add a definite article. This means the snapshot also needs to be
updated.
This PR adds a new `reason` column to the change request schedules table
and populates it with the data that is in the `failure_reason` column.
This is the expand phase of the expand/contract pattern. The code in
enterprise will be updated to try and use the new column name, but fall
back to the old one if no value is present.
The old column can be removed later.
This metric was used while developing the optimal304 feature. The
feature flag has been removed and this data is not longer being
collected and this will remove the metric from Prometheus.
## About the changes
This allows us to encrypt emails at signup for demo users to further
secure our demo instance. Currently, emails are anonymized before
displaying events performed by demo users. But this means that emails
are stored at rest in our DB. By encrypting the emails at login, we're
adding another layer of protection.
This can be enabled with a flag and requires the encryption key and the
initialization vector (IV for short) to be present as environment
variables.
Related to our work for making Edge bulk metrics a 1st class citizen of
Unleash, this PR adds an X-Unleash-Version header to the response from
client registration.
Based on when we add the new `/api/client/metrics/bulk` endpoint, Edge
can use the response header from upstream to decide whether to post
metrics to `/edge/metrics` or `/api/client/metrics/bulk`.
If the kill switch is enabled unleash returns 404 and a json body explaining why a 404 was given, encouraging users to upgrade to the most recent version of Edge.
## About the changes
Creating an incoming webhook with an admin token means we can't
correlate the action with a real user. In this case we should support
null.
Was having some trouble running these migration tests locally due to
`dbm` not correctly picking up the passed in config. This fixes it by
setting the custom config property after it has been initialized, always
overriding any wrong values.
PS: I think I found the issue. `dbm` was prioritizing my `DATABASE_URL`
for some reason, as I started having issues when it was set, and stopped
having issues when I unset it.
I still think this is a good change, as it prevents similar
hard-to-debug issues in the future.
To help clarify this, running this locally:
- `export
DATABASE_URL=postgres://unleash_user:passord@localhost:5432/unleash`
- `yarn test dedupe-permissions`
Fails on `main`, but passes on this branch. For some reason the `dbm`
instance prioritizes whatever is set in `DATABASE_URL` instead of the
options that are passed in `getInstance`.
We've had a couple of misunderstandings from people surprised that
Unleash allows posts against the `/edge/validate` endpoint without an
API key. It is intentional that this endpoint does not require an
Authorization header, so this PR updates our OpenAPI spec to clarify
that there is no security required for `/edge/validate`
## About the changes
Migrations for:
- Adds column is_system to users
- Inserts unleash_system_user id -1337 to users
includes `is_system: false` in the activeUsers and activeAccounts where filter
Tested by running:
`
select * into users_pre_check from users where id > -1;
delete from users where id > -1;
`
before starting unleash, then inspecting users table after unleash has
started and verifying that an 'admin' user has been created.
---------
Co-authored-by: Christopher Kolstad <chriswk@getunleash.ai>
This backwards compatible change allows us to specify a schema `id`
(full path) which to me feels a bit better than specifying the schema
name as a string, since a literal string is prone to typos.
### Before
```ts
requestBody: createRequestSchema(
'createResourceSchema',
),
responses: {
...getStandardResponses(400, 401, 403, 415),
201: resourceCreatedResponseSchema(
'resourceSchema',
),
},
```
### After
```ts
requestBody: createRequestSchema(
createResourceSchema.$id,
),
responses: {
...getStandardResponses(400, 401, 403, 415),
201: resourceCreatedResponseSchema(
resourceSchema.$id,
),
},
```
With the recent changes it's common that we'll need both the id and
processed username from the auth user in the request, so this PR
provides some helper methods to simplify this.
## About the changes
Adds the new nullable column created_by_user_id to the data used by
feature-tag-store and feature-tag-service. Also updates openapi schemas.
## About the changes
Replaces #5616
Renamed newly added `created_by` columns to `created_by_user_id` for
these tables:
features
feature_tag
feature_strategies
feature_types
role_permission
role_user
roles
users
api_tokens
Two changes were needed to sort better
1. Since we are still using `last seen` from `features` table for
backwards compatibility, we needed to add it to sort condition.
2. Nulls break the order, so now sorting nulls as last.
I noticed I was getting warnings logged in my local instance when
visiting the users page (`/admin/users`)
```json
{
"schema": "#/components/schemas/publicSignupTokensSchema",
"errors": [
{
"instancePath": "/tokens/0/users/0/username",
"schemaPath": "#/components/schemas/userSchema/properties/username/type",
"keyword": "type",
"params": {
"type": "string"
},
"message": "must be string"
}
]
}
```
It was complaining because one of my users doesn't have a username, so
the value returned from the API was:
```json
{
"users": [
{
"id": 2,
"name": "2mas",
"username": null
}
]
}
```
This adjustment fixes that oversight by allowing `null` values for the
username.
## Why
Currently AWS API Gateway doesn't have compression enabled by default,
this PR will make it easier to for example deploy Unleash over to AWS
Lambda without further configuration in API Gateway, frameworks like
Serverless requires a bit more work to set up compression and some times
one might not need compression at all.
## How
Create a new config flag called `disableCompression` which will not
include `compression` middleware in express' instance when set as true.
## About the changes
This adds a Makefile to make it easy to test migrations from one version
of Unleash to another.
The script depends on [docker compose
V2](https://docs.docker.com/compose/migrate/)
**Before starting**: make sure you're inside test-migrations folder and
run `make clean` to be in a clean state.
We can run 2 versions of Unleash side by side with a shared database
(the second version will apply migrations to the DB):
```shell
UNLEASH_DOCKER_IMAGE=unleashorg/unleash-server:5.6.10 make start-unleash # defaults to port 4242
UNLEASH_DOCKER_IMAGE=unleashorg/unleash-server:latest make start-another-unleash # defaults to port 4243
make test # run basic UI tests against port 4242 (first image)
EXPOSED_PORT=4243 make test # run basic UI tests against port 4243
```
This also enables us to test our local repository with our code of
Unleash server running at port 4244 (`EXPOSE_PORT=4444 make run-current`
if you want to change it):
```shell
UNLEASH_DOCKER_IMAGE=unleashorg/unleash-server:5.6.10 make start-unleash # defaults to port 4242
make run-current # exposes the current backend at 4244
```
You can also connect the latest UI to any of the ports specified above,
starting the UI at port 3000:
```shell
EXPOSED_PORT=4242 make run-current-ui # exposed port defaults to 4244 which is the port of the current backend
```
### What
Adds `createdByUserId` to all events exposed by unleash. In addition
this PR updates all tests and usages of the methods in this codebase to
include the required number.
## About the changes
Adds the column `created_by_user_id` to `events` table and adds index
for it
---------
Co-authored-by: Christopher Kolstad <chriswk@getunleash.ai>
This PR fixes the issue discussed in SR-234, where you would get a 200
OK response even if your POST request to
`/api/admin/projects/<project-name>/access` contains invalid data (and
nothing is persisted).
Today we include a lot of "secutiry headers" for all API calls. Quite a
lot of them are only relevent when we return a HTML document for the
browser.
This PR removes and simplify these headers for API calls, so that we do
not include unecessary data in the HTTP headers.
Each header have been carfully examied by following best practices from
these source:
-
https://cheatsheetseries.owasp.org/cheatsheets/REST_Security_Cheat_Sheet.html
- https://owasp.org/www-project-secure-headers/
This feature is protected with feature flag named 'stripHeadersOnAPI'.
As it says on the tin. In an attempt to make all operations in Unleash
traceable to an originator. This PR adds created_by to role_permission,
which will show which user assigned a permission to a role.
This change adds a property to the segmentStrategiesSchema to make sure
that change request strategies are listed in the openapi spec
It also renames the files that contains that schema and its tests from
`admin-strategies-schema` to `segment-strategies-schema`.
Adding new project overview endpoint and deprecating the old one.
The new one has extra info about feature types, but does not have
features anymore, because features are coming from search endpoint.
## About the changes
Add user ids to group changes. This also modifies the payload of group created to include only the user id and creates events for SSO sync functionality
This adds more data to the setting events, so that its possible to see
what has changed
Used to look like:
```
{
"id": "maintenance.mode"
}
```
Now it looks like this:
```
{
"id": "maintenance.mode",
"enabled": false
}
```
because this is setting events, the default behaviour is to hide the content.
This PR checks that the unleash instance is an enterprise instance
before fetching change request data. This is to prevent Change Request
usage from preventing OSS users from deleting segments (when they don't
have access to change requests).
This PR also does a little bit of refactoring (which we can remove if
you want)
This PR updates the returned value about segments to also include the CR
title and to be one list item per strategy per change request. This
means that if the same strategy is used multiple times in multiple
change requests, they each get their own line (as has been discussed
with Nicolae).
Because of this, this pr removes a collection step in the query and
fixes some test cases.
The previous check would return `false` if the value was 0, causing a
bug where the usage data wouldn't be included.
This also adds tests to ensure that usage data for CR segments is
propagated correctly because that's where I first encountered the issue.
Before this fix, if the values were 0, the data would display like the
bottom element in the screenshot:
- Create 2 new events to replace the SCHEDULED_CHANGE_REQUEST_EXECUTED
event
- Handle the 3 events in slack-app and webhook addon definitions
3 events handled:
- CHANGE_REQUEST_SCHEDULED
- CHANGE_REQUEST_SCHEDULED_APPLICATION_SUCCESS
- CHANGE_REQUEST_SCHEDULED_APPLICATION_FAILURE
Closes #
[1-1555](https://linear.app/unleash/issue/1-1555/update-change-request-scheduled-and-scheduled-change-request-executed)
Note: SCHEDULED_CHANGE_REQUEST_EXECUTED will be removed in follow up PR
not to break current enterprise build
---------
Signed-off-by: andreas-unleash <andreas@getunleash.ai>
This PR addresses some cleanup related to removing the
useLastSeenRefactor flag:
* Added fallback last seen to the feature table last_seen_at column
* Remove foreign key on environment since we can not guarantee that we
will get valid data in this field
* Add environments to cleanup function
* Add test for cleanup environments
This PR changes the behavior of the API a little bit. Instead of
removing any strategies from `changeRequestStrategies` that are also
in `strategies`, we keep them in instead.
The reason for this is that the overview of where a segment is used is
incomplete if it shows only strategies but not CRs. Imagine this:
You want to delete a segment, but you're told it's only used in strategy
S.
So you go and remove it from strategy S, but then you're told it's
suddenly used in CRs A, B, and C. This is now a two-step operation
with a bad surprise. Instead, we could show you immediately that this
segment is used in strategy S and CRs A, B, and C.
Otherwise, we might accidentally display CR data to open source users.
But more importantly, it might keep them from being able to delete a
segment that's in use by a CR in their database that they can't touch.
So by checking that they're on an enterprise instance, we avoid this
potential blocker.
I've added the `includeChangeRequestUsageData` parameter as a boolean
now, but I'm open to other suggestions.
This PR handles the case where a single strategy is used in multiple
change requests. Instead of listing the strategy several times in the
output, we consolidate the entries and add a new `changeRequestIds`
property. This is a non-empty list that points to all the change
requests it is used in.
This is required for us to be able to link back to the change requests
from the UI overview.
This change is just a refactor, removing code that's no longer used. Instead of
checking just whether a segment is in use, we now extract the list of
strategies that use this segment. This is slightly more costly,
perhaps, but it will be necessary for the upcoming implementation.
This PR changes the payload of the strategiesBySegment endpoint when the
flag is active. In addition to returning just the strategies, the object
will also contain a new property, called `changeRequestStrategies`
containing the strategies that are used in change requests.
This PR does not update the schema. That can be done later when the
changes go into beta. This also allows us some time to iterate on the
payload without changing the public API.
## Discussion points:
Should `strategies` and `changeRequestStrategies` ever contain
duplicates? Take this scenario:
- Strategy S uses segment T.
- There is an open change request that updates the list of segments for
S to T and a new segment U.
- In this case, strategy S would show up both in `strategies` _and_ in
`changeRequestStrategies`.
We have two options:
1. Filter the list of change request strategies, so that they don't
contain any duplicates (this is currently how it's implemented)
2. Ignore the duplicates and just send both lists as is.
We're doing option 2 for now.
Removing a user from a project was impossible if you only had 1 owner.
It worked fine when having more than an owner. This should fix it and
we'll add tests later
In short the issue is that after our last seen improvements, we did not
update where we are getting last_seen field. It was still using features
table, which is not the source of last seen anymore.
## PR Description
https://linear.app/unleash/issue/2-1645/address-post-mortem-action-point-all-flags-should-be-runtime
Refactor with the goal of ensuring that flags are runtime controllable,
mostly focused on the current scheduler logic.
This includes the following changes:
- Moves scheduler into its own "scheduler" feature folder
- Reverts dependency: SchedulerService takes in the MaintenanceService,
not the other way around
- Scheduler now evaluates maintenance mode at runtime instead of relying
only on its mode state (active / paused)
- Favors flag checks to happen inside the scheduled methods, instead of
controlling whether the method is scheduled at all (favor runtime over
startup)
- Moves "account last seen update" to scheduler
- Updates tests accordingly
- Boyscouting
Here's a manual test showing this behavior, where my local instance was
controlled by a remote instance. Whenever I toggle `maintenanceMode`
through a flag remotely, my scheduled functions stop running:
https://github.com/Unleash/unleash/assets/14320932/ae0a7fa9-5165-4c0b-9b0b-53b9fb20de72
Had a look through all of our current flags and it *seems to me* that
they are all used in a runtime controllable way, but would still feel
more comfortable if this was double checked, since it can be complex to
ensure this.
The only exception to this was `migrationLock`, which I believe is OK,
since the migration only happens at the start anyways.
## Discussion / Questions
~~Scheduler `mode` (active / paused) is currently not *really* being
used, along with its respective methods, except in tests. I think this
could be a potential footgun. Should we remove it in favor of only
controlling the scheduler state through maintenance mode?~~ Addressed in
7c52e3f638
~~The config property `disableScheduler` is still a startup
configuration, but perhaps that makes sense to leave as is?~~
[Answered](https://github.com/Unleash/unleash/pull/5363#issuecomment-1819005445)
by @FredrikOseberg, leaving as is.
Are there any other tests we should add?
Is there anything I missed?
Identified some `setInterval` and `setTimeout` that may make sense to
leave as is instead of moving over to the scheduler service:
- ~~`src/lib/metrics` - This is currently considered a `MetricsMonitor`.
Should this be refactored to a service instead and adapt these
setIntervals to use the scheduler instead? Is there anything special
with this we need to take into account? @chriswk @ivarconr~~
[Answered](https://github.com/Unleash/unleash/pull/5363#issuecomment-1820501511)
by @ivarconr, leaving as is.
- ~~`src/lib/proxy/proxy-repository.ts` - This seems to have a complex
and specific logic currently. Perhaps we should leave it alone for now?
@FredrikOseberg~~
[Answered](https://github.com/Unleash/unleash/pull/5363#issuecomment-1819005445)
by @FredrikOseberg, leaving as is.
- `src/lib/services/user-service.ts` - This one also seems to be a bit
more specific, where we generate new timeouts for each receiver id.
Might not belong in the scheduler service. @Tymek
This PR adds the ability to detect which strategies use a specific
segment in active change requests.
It does not wire this functionality up to anything just yet. Follow-up
PRs will integrate this with the segment service and eventually with the
front end.
The issue was that we all features were created exactly in same time,
and our feature counter waas expecting time to be unique to feature,
which was not the case.
Instead of throwing an error when the project doesn't exist, we say that
the names are valid, because we have nothing to say that they're not.
Presumably there is already something in place to prevent you from
importing into a non-existent project.
## About the changes
This feature allows our Enterprise customers to configure banners to be
displayed on their Unleash instance for all their users to see and
interact with. Previously known as "internal message banners".
Optimizations:
1. Removed extra round trip to database to count environments
2. Removed extra round trip to database to count features
Fixes:
Currently, we were using a very optimistic query to set correct limit
and offset. This breaks as soon we we join tags.
` query = query
.select(selectColumns)
.limit(limit * environmentCount)
.offset(offset * environmentCount);`
The solution was to use common table expressions, so we could count and
rank features.
Rename event to SCHEDULED_CHANGE_REQUEST_EXECUTED
This event will be triggered when the executor runs a scheduled change
request.
The ChangeRequestApplied event will remain as is (going out to project
members - but will have a scheduled = true property in the data if it
scheduled.
This new event will fire on execution of the schedule and have a result
= "failed" | "succeeded" property.
Because notifications are tied to events, this notification will go out
to the creator and the applier
---------
Signed-off-by: andreas-unleash <andreas@getunleash.ai>
This PR updates the segment usage counting to also include segment usage
in pending change requests.
The changes include:
- Updating the schema to explicitly call out that change request usage
is included.
- Adding two tests to verify the new features
- Writing an alternate query to count this data
Specifically, it'll update the part of the UI that tells you how many
places a segment is used:
## Implementation
Implementing this was a little tricky. Previously, we'd just count
distinct instances of feature names and project names on the
feature_strategy table. However, to merge this with change request data,
we can't just count existing usage and change request usage separately,
because that could cause duplicates.
Instead of turning this into a complex DB query, I've broken it up into
a few separate queries and done the merging in JS. I think that's more
readable and it was easier to reason about.
Here's the breakdown:
1. Get the list of pending change requests. We need their IDs and their
project.
2. Get the list of updateStrategy and addStrategy events that have
segment data.
3. Take the result from step 2 and turn it into a dictionary of segment
id to usage data.
4. Query the feature_strategy_segment and feature_strategies table, to
get existing segment usage data
5. Fold that data into the change request data.
6. Perform the preexisting segment query (without counting logic) to get
other segment data
7. Enrich the results of the query from step 2 with usage data.
## Discussion points
I feel like this could be done in a nicer way, so any ideas on how to
achieve that (whether that's as a db query or just breaking up the code
differently) is very welcome.
Second, using multiple queries obviously yields more overhead than just
a single one. However, I do not think this is in the hot path, so I
don't consider performance to be critical here, but I'm open to hearing
opposing thoughts on this of course.
https://linear.app/unleash/issue/SR-169/ticket-1107-project-feature-flag-limit-is-not-correctly-updatedFixes#5315, an issue where it would not be possible to set an empty
flag limit.
This also fixes the UI behavior: Before, when the flag limit field was
emptied, it would disappear from the UI.
I'm a bit unsure of the original intent of the `(data.defaultStickiness
!== undefined || data.featureLimit !== undefined)` condition. We're in
an update method, triggered by a PUT endpoint - I think it's safe to
assume that we'll always want to set these values to whatever they come
as, we just need to convert them to `null` in case they are not present
(i.e. `undefined`).
This fixes an edge case not caught originally in
https://github.com/Unleash/unleash/pull/5304 - When creating a new
segment on the global level:
- There is no `projectId`, either in the params or body
- The `UPDATE_PROJECT_SEGMENT` is still a part of the permissions
checked on the endpoint
- There is no `id` on the params
This made it so that we would run `segmentStore.get(id)` with an
undefined `id`, causing issues.
The fix was simply checking for the presence of `params.id` before
proceeding.
This PR hooks up the changes introduced in #5301 to the API and puts
them behind a feature flag. A new test has been added and the test setup
has been slightly tweaked to allow this test.
When the flag is enabled, the API will now not let you delete a segment
that's used in any active CRs.
https://linear.app/unleash/issue/SR-164/ticket-1106-user-with-createedit-project-segment-is-not-able-to-edit-a
Fixes a bug where the `UPDATE_PROJECT_SEGMENT` permission is not
respected, both on the UI and on the API. The original intention was
stated
[here](https://github.com/Unleash/unleash/pull/3346#discussion_r1140434517).
This was easy to fix on the UI, since we were simply missing the extra
permission on the button permission checks.
Unfortunately the API can be tricky. Our auth middleware tries to grab
the `project` information from either the params or body object, but our
`DELETE` method does not contain this information. There is no body and
the endpoint looks like `/admin/segments/:id`, only including the
segment id.
This means that, in the rbac middleware when we check the permissions,
we need to figure out if we're in such a scenario and fetch the project
information from the DB, which feels a bit hacky, but it's something
we're seemingly already doing for features, so at least it's somewhat
consistent.
Ideally what we could do is leave this API alone and create a separate
one for project segments, with endpoints where we would have project as
a param, like so:
`http://localhost:4242/api/admin/projects/:projectId/segments/1`.
This PR opts to go with the quick and hacky solution for now since this
is an issue we want to fix quickly, but this is something that we should
be aware of. I'm also unsure if we want to create a new API for project
segments. If we decide that we want a different solution I don't mind
either adapting this PR or creating a follow up.
